<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="da_DK">
<context>
    <name>ACLEditor</name>
    <message>
        <location filename="ACLEditor.cpp" line="+109"/>
        <source>Deny</source>
        <translation>Nægt</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Allow</source>
        <translation>Tillad</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Allow %1</source>
        <translation>Tillad %1</translation>
    </message>
    <message>
        <location line="-8"/>
        <source>Deny %1</source>
        <translation>Nægt %1</translation>
    </message>
    <message>
        <location line="-66"/>
        <source>Mumble - Add channel</source>
        <translation>Mumble - Tilføj kanal</translation>
    </message>
    <message>
        <location line="+24"/>
        <location line="+167"/>
        <source>Failed: Invalid channel</source>
        <translation>Mislykkedes: Ugyldig kanal</translation>
    </message>
    <message>
        <location line="-155"/>
        <source>Mumble - Edit %1</source>
        <translation>Mumble - Redigér %1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>ID: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+37"/>
        <source>This grants the %1 privilege. If a privilege is both allowed and denied, it is denied.&lt;br /&gt;%2</source>
        <translation>Dette tildeler %1-privilegiet. Hvis et privilegium både er tilladt og nægtet, er det nægtet.&lt;br /&gt;%2</translation>
    </message>
    <message>
        <location line="+123"/>
        <source>Channel must have a name</source>
        <translation>Kanalen skal have et navn</translation>
    </message>
    <message>
        <location line="-131"/>
        <source>This revokes the %1 privilege. If a privilege is both allowed and denied, it is denied.&lt;br /&gt;%2</source>
        <translation>Dette ophæver %1-privilegiet. Hvis et privilegium både er tilladt og nægtet, er det nægtet.&lt;br /&gt;%2</translation>
    </message>
    <message>
        <location filename="ACLEditor.ui"/>
        <source>Dialog</source>
        <translation>Dialogboks</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Properties</source>
        <oldsource>Properties</oldsource>
        <translation>&amp;Egenskaber</translation>
    </message>
    <message>
        <location/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location/>
        <source>Enter the channel name here.</source>
        <translation>Skriv kanalnavnet hér.</translation>
    </message>
    <message>
        <location/>
        <source>Description</source>
        <translation>Beskrivelse</translation>
    </message>
    <message>
        <location/>
        <source>Password</source>
        <translation>Adgangskode</translation>
    </message>
    <message>
        <location/>
        <source>Enter the channel password here.</source>
        <translation>Skriv adgangskoden for kanalen hér.</translation>
    </message>
    <message>
        <location/>
        <source>Check to create a temporary channel.</source>
        <translation>Markér for at oprette en midlertidig kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Temporary</source>
        <translation>Midlertidig</translation>
    </message>
    <message>
        <location/>
        <source>Channel positioning facility value</source>
        <translation>Prioriteringsværdi for placering af kanalen</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Position&lt;/b&gt;&lt;br/&gt;
This value enables you to change the way Mumble arranges the channels in the tree. A channel with a higher &lt;i&gt;Position&lt;/i&gt; value will always be placed below one with a lower value and the other way around. If the &lt;i&gt;Position&lt;/i&gt; value of two channels is equal they will get sorted alphabetically by their name.</source>
        <oldsource>&lt;b&gt;Position&lt;/b&gt;&lt;br/&gt;
This value enables you to change the way mumble arranges the channels in the tree. A channel with a higher &lt;i&gt;Position&lt;/i&gt; value will always be placed below one with a lower value and the other way around. If the &lt;i&gt;Position&lt;/i&gt; value of two channels is equal they will get sorted alphabetically by their name.</oldsource>
        <translation>&lt;b&gt;Placering&lt;/b&gt;&lt;br/&gt;
Denne værdi gør dig i stand til at ændre måden Mumble arrangerer kanalerne i træet. En kanal med en højere &lt;i&gt;placerings&lt;/i&gt;-værdi vil altid blive placeret under én med en lavere værdi og omvendt. Hvis &lt;i&gt;placerings&lt;/i&gt;-værdien er ens for to kanaler, vil de blive sorteres alfabetisk efter deres navn.</translation>
    </message>
    <message>
        <location/>
        <source>Position</source>
        <translation>Placering</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Groups</source>
        <translation>&amp;Grupper</translation>
    </message>
    <message>
        <location/>
        <source>Group</source>
        <translation>Gruppe</translation>
    </message>
    <message>
        <location/>
        <source>List of groups</source>
        <translation>Liste over grupper</translation>
    </message>
    <message>
        <location/>
        <source>Remove selected group</source>
        <translation>Fjern den valgte gruppe</translation>
    </message>
    <message>
        <location/>
        <source>Remove</source>
        <translation>Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Inherit group members from parent</source>
        <translation>Arv gruppemedlemmer fra forælder</translation>
    </message>
    <message>
        <location/>
        <source>Inherit</source>
        <translation>Arv</translation>
    </message>
    <message>
        <location/>
        <source>Make group inheritable to sub-channels</source>
        <translation>Lav gruppe arvelig for underkanaler</translation>
    </message>
    <message>
        <location/>
        <source>Inheritable</source>
        <translation>Arvelig</translation>
    </message>
    <message>
        <location/>
        <source>Group was inherited from parent channel</source>
        <translation>Gruppe var arvet fra forælderkanal</translation>
    </message>
    <message>
        <location/>
        <source>Inherited</source>
        <translation>Arvet</translation>
    </message>
    <message>
        <location/>
        <source>Members</source>
        <translation>Medlemmer</translation>
    </message>
    <message>
        <location/>
        <source>Add</source>
        <translation>Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Add member to group</source>
        <translation>Tilføj medlem til gruppe</translation>
    </message>
    <message>
        <location/>
        <source>Remove member from group</source>
        <translation>Fjern medlem fra gruppe</translation>
    </message>
    <message>
        <location/>
        <source>&amp;ACL</source>
        <translation>&amp;ACL</translation>
    </message>
    <message>
        <location/>
        <source>Active ACLs</source>
        <translation>Aktive ACLs</translation>
    </message>
    <message>
        <location/>
        <source>List of entries</source>
        <translation>Liste over indtastninger</translation>
    </message>
    <message>
        <location/>
        <source>Inherit ACL of parent?</source>
        <translation>Arv ACL fra forælder?</translation>
    </message>
    <message>
        <location/>
        <source>This sets whether or not the ACL up the chain of parent channels are applied to this object. Only those entries that are marked in the parent as &quot;Apply to sub-channels&quot; will be inherited.</source>
        <translation>Dette indstiller hvorvidt ACL fra forælderkanaler anvendes på denne kanal. Kun indtastninger i forælderkanaler, der er markeret som &quot;Anvend på underkanaler&quot;, vil blive arvet.</translation>
    </message>
    <message>
        <location/>
        <source>Inherit ACLs</source>
        <translation>Arv ACLs</translation>
    </message>
    <message>
        <location/>
        <source>Move entry up</source>
        <translation>Flyt regel op</translation>
    </message>
    <message>
        <location/>
        <source>This moves the entry up in the list. As entries are evaluated in order, this may change the effective permissions of users. You cannot move an entry above an inherited entry, if you really need that you&apos;ll have to duplicate the inherited entry.</source>
        <translation>Dette flytter reglen op ad listen.  Eftersom regler bliver evalueret i rækkefølge, kan dette ændre de faktiske rettigheder for brugere. Du kan ikke flytte en regel op over arvede regler, men hvis du virkelig behøver dette, så skal du gentage den arvede regel.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Up</source>
        <translation>&amp;Op</translation>
    </message>
    <message>
        <location/>
        <source>Move entry down</source>
        <translation>Flyt regel ned</translation>
    </message>
    <message>
        <location/>
        <source>This moves the entry down in the list. As entries are evaluated in order, this may change the effective permissions of users.</source>
        <translation>Dette flytter reglen ned på listen. Eftersom regler bliver evalueret i rækkefølge, kan dette ændre de faktiske rettigheder for brugere.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Down</source>
        <translation>&amp;Ned</translation>
    </message>
    <message>
        <location/>
        <source>Add new entry</source>
        <translation>Tilføj ny regel</translation>
    </message>
    <message>
        <location/>
        <source>This adds a new entry, initially set with no permissions and applying to all.</source>
        <translation>Dette tilføjer en ny regel, hvori der fra start af ikke er specificeret nogle rettigheder, og som anvendes på alle.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Add</source>
        <translation>&amp;Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Remove entry</source>
        <translation>Fjern regel</translation>
    </message>
    <message>
        <location/>
        <source>This removes the currently selected entry.</source>
        <translation>Dette fjerner den nuværende valgte regel.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove</source>
        <translation>&amp;Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Context</source>
        <translation>Indflydelse</translation>
    </message>
    <message>
        <location/>
        <source>Entry should apply to this channel.</source>
        <oldsource>Entry should apply to this channel</oldsource>
        <translation>Reglen skal anvendes på denne kanal.</translation>
    </message>
    <message>
        <location/>
        <source>This makes the entry apply to this channel.</source>
        <translation>Dette gør, så reglen anvendes på denne kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Applies to this channel</source>
        <translation>Anvend på denne kanal</translation>
    </message>
    <message>
        <location/>
        <source>Entry should apply to sub-channels.</source>
        <translation>Reglen skal anvendes på underkanaler.</translation>
    </message>
    <message>
        <location/>
        <source>Add new group</source>
        <translation>Tilføj ny gruppe</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Add&lt;/b&gt;&lt;br/&gt;
Add a new group.</source>
        <translation>&lt;b&gt;Tilføj&lt;/b&gt;&lt;br/&gt;
Tilføj en ny gruppe.</translation>
    </message>
    <message>
        <location/>
        <source>Inherited members</source>
        <translation>Arvede medlemmer</translation>
    </message>
    <message>
        <location/>
        <source>Contains the list of members added to the group by this channel.</source>
        <translation>Indeholder listen over brugere tilføjet til gruppen af denne kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Contains a list of members whose group membership will not be inherited from the parent channel.</source>
        <translation>Indeholder en liste over brugere hvis gruppemedlemskab ikke vil blive arvet fra forælderkanalen.</translation>
    </message>
    <message>
        <location/>
        <source>Contains the list of members inherited by other channels.</source>
        <translation>Indeholder listen over brugere arvet fra andre kanaler.</translation>
    </message>
    <message>
        <location/>
        <source>Type in the name of a user you wish to add to the group and click Add.</source>
        <translation>Skriv navnet på en bruger du vil tilføje til gruppen og klik &lt;i&gt;Tilføj&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>Type in the name of a user you wish to remove from the group and click Add.</source>
        <translation>Skriv navnet på en bruger du vil fjerne fra gruppen og klik &lt;i&gt;Tilføj&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>Exclude</source>
        <translation>Udelad</translation>
    </message>
    <message>
        <location/>
        <source>Excluded members</source>
        <translation>Udeladte medlemmer</translation>
    </message>
    <message>
        <location/>
        <source>This makes the entry apply to sub-channels of this channel.</source>
        <translation>Dette gør, så reglen anvendes på underkanaler til denne kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Applies to sub-channels</source>
        <translation>Anvend på underkanaler</translation>
    </message>
    <message>
        <location/>
        <source>Permissions</source>
        <translation>Tilladelser</translation>
    </message>
    <message>
        <location/>
        <source>User/Group</source>
        <translation>Bruger/gruppe</translation>
    </message>
    <message>
        <location/>
        <source>Group this entry applies to</source>
        <translation>Gruppen som denne regel anvendes på</translation>
    </message>
    <message>
        <location/>
        <source>User ID</source>
        <translation>Bruger ID</translation>
    </message>
    <message>
        <location/>
        <source>User this entry applies to</source>
        <translation>Brugere som denne regel gælder for</translation>
    </message>
    <message>
        <location/>
        <source>This controls which user this entry applies to. Just type in the user name and hit enter to query the server for a match.</source>
        <translation>Dette kontrollerer, hvilken bruger reglen anvendes på. Skriv bare brugernavnet og tryk enter for at forespørge serveren for et match.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Name&lt;/b&gt;&lt;br /&gt;Enter the channel name in this field. The name has to comply with the restriction imposed by the server you are connected to.</source>
        <translation>&lt;b&gt;Navn&lt;/b&gt;&lt;br /&gt;Skriv kanalnavnet i dette felt. Navnet skal imødekomme de begrænsninger, som serveren, du har forbindelse til, pålægger.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Temporary&lt;/b&gt;&lt;br /&gt;
When checked the channel created will be marked as temporary. This means when the last player leaves it the channel will be automatically deleted by the server.</source>
        <translation>&lt;b&gt;Midlertidig&lt;/b&gt;&lt;br &gt;
Hvis denne er markeret, vil kanalen, der oprettes, blive markeret som midlertidig. Dette betyder, at når den sidste bruger forlader kanalen, vil den automatisk blive slettet af serveren.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Group&lt;/b&gt;&lt;br /&gt;
These are all the groups currently defined for the channel. To create a new group, just type in the name and press enter.</source>
        <translation>&lt;b&gt;Gruppe&lt;/b&gt;&lt;br &gt;
Disse er alle grupperne, der i øjeblikket gælder for kanalen. For at oprette en ny gruppe skal du bare skrive navnet og trykke enter.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Remove&lt;/b&gt;&lt;br /&gt;This removes the currently selected group. If the group was inherited, it will not be removed from the list, but all local information about the group will be cleared.</source>
        <translation>&lt;b&gt;Fjern&lt;/b&gt;&lt;br &gt;Dette fjerner den nuværende valgte gruppe. Hvis gruppen var arvet, vil den ikke blive fjernet fra listen, men alt lokal information om gruppen vil blive slettet.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Inherit&lt;/b&gt;&lt;br /&gt;This inherits all the members in the group from the parent, if the group is marked as &lt;i&gt;Inheritable&lt;/i&gt; in the parent channel.</source>
        <translation>&lt;b&gt;Arv&lt;/b&gt;&lt;br &gt;Dette arver alle medlemmer i gruppen fra forælderen, hvis gruppen er markeret som &lt;i&gt;arvelig&lt;/i&gt; i forælderkanalen.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Inheritable&lt;/b&gt;&lt;br /&gt;This makes this group inheritable to sub-channels. If the group is non-inheritable, sub-channels are still free to create a new group with the same name.</source>
        <translation>&lt;b&gt;Arvelig&lt;/b&gt;&lt;br &gt;Dette gør denne gruppe arvelig for underkanaler. Hvis gruppen ikke er arvelig, kan der i underkanaler oprettes en ny gruppe med samme navn.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Inherited&lt;/b&gt;&lt;br /&gt;This indicates that the group was inherited from the parent channel. You cannot edit this flag, it&apos;s just for information.</source>
        <translation>&lt;b&gt;Arvet&lt;/b&gt;&lt;br &gt;Dette indikerer at gruppen er arvet fra forælderkanalen. Du kan ikke ændre dette flag, det er kun til information.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Members&lt;/b&gt;&lt;br /&gt;
This list contains all members that were added to the group by the current channel. Be aware that this does not include members inherited by higher levels of the channel tree. These can be found in the &lt;i&gt;Inherited members&lt;/i&gt; list. To prevent this list to be inherited by lower level channels uncheck &lt;i&gt;Inheritable&lt;/i&gt; or manually add the members to the &lt;i&gt;Excluded members&lt;/i&gt; list.</source>
        <translation>&lt;b&gt;Medlemmer&lt;/b&gt;&lt;br &gt;
Denne liste inderholder medlemmer, der er blevet tilføjet til gruppen af den nuværende kanal. Vær opmærksom på at listen ikke inkluderer medlemmer arvet fra højere niveauer i kanaltræet. Disse kan findes i listen &lt;i&gt;Arvede medlemmer&lt;/i&gt;. For at forhindre denne liste i at blive arvet til underkanaler, skal du fjerne markeringen &lt;i&gt;Arvelig&lt;/i&gt; eller manuelt tilføje medlemmer til listen &lt;i&gt;Udeladte medlemmer&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Excluded members&lt;/b&gt;&lt;br /&gt;
Contains a list of members whose group membership will not be inherited from the parent channel.</source>
        <translation>&lt;b&gt;Udeladte medlemmer&lt;/b&gt;&lt;br /&gt;
Inderholder en liste over medlemmer hvis gruppemedlemskab ikke vil blive arvet fra forælderkanalen.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Inherited members&lt;/b&gt;&lt;br /&gt;
Contains the list of members inherited by the current channel. Uncheck &lt;i&gt;Inherit&lt;/i&gt; to prevent inheritance from higher level channels.</source>
        <translation>&lt;b&gt;Arvede medlemmer&lt;/b&gt;&lt;br &gt;
Indeholder listen over medlemmer der er arvet af den nuværende kanal. Fjern markeringen af &lt;i&gt;Arv&lt;/i&gt; for at forhindre, at der kan arves fra kanaler i højere niveauer.</translation>
    </message>
    <message>
        <location/>
        <source>This controls which group of users this entry applies to.&lt;br /&gt;Note that the group is evaluated in the context of the channel the entry is used in. For example, the default ACL on the Root channel gives &lt;i&gt;Write&lt;/i&gt; permission to the &lt;i&gt;admin&lt;/i&gt; group. This entry, if inherited by a channel, will give a user write privileges if he belongs to the &lt;i&gt;admin&lt;/i&gt; group in that channel, even if he doesn&apos;t belong to the &lt;i&gt;admin&lt;/i&gt; group in the channel where the ACL originated.&lt;br /&gt;If a group name starts with &apos;!&apos;, its membership is negated, and if it starts with &apos;~&apos;, it is evaluated in the channel the ACL was defined in, rather than the channel the ACL is active in.&lt;br /&gt;If a group name starts with &apos;#&apos;, it is interpreted as an access token. Users must have entered whatever follows the &apos;#&apos; in their list of access tokens to match. This can be used for very simple password access to channels for non-authenticated users.&lt;br /&gt;If a group name starts with &apos;$&apos;, it will only match users whose certificate hash matches what follows the &apos;$&apos;.&lt;br /&gt;A few special predefined groups are:&lt;br /&gt;&lt;b&gt;all&lt;/b&gt; - Everyone will match.&lt;br /&gt;&lt;b&gt;auth&lt;/b&gt; - All authenticated users will match.&lt;br /&gt;&lt;b&gt;sub,a,b,c&lt;/b&gt; - User currently in a sub-channel minimum &lt;i&gt;a&lt;/i&gt; common parents, and between &lt;i&gt;b&lt;/i&gt; and &lt;i&gt;c&lt;/i&gt; channels down the chain. See the website for more extensive documentation on this one.&lt;br /&gt;&lt;b&gt;in&lt;/b&gt; - Users currently in the channel will match (convenience for &apos;&lt;i&gt;sub,0,0,0&lt;/i&gt;&apos;).&lt;br /&gt;&lt;b&gt;out&lt;/b&gt; - Users outside the channel will match (convenience for &apos;&lt;i&gt;!sub,0,0,0&lt;/i&gt;&apos;).&lt;br /&gt;Note that an entry applies to either a user or a group, not both.</source>
        <translation>Dette kontrollerer hvilken gruppe brugere, som denne regel gælder for.&lt;br /&gt;Vær opmærksom på at gruppen bliver evalueret i sammenhæng med kanalen, som reglen er brugt i. Fx giver standard ACL på rod-kanalen &lt;i&gt;Skrive&lt;/i&gt;-rettigheder til &lt;i&gt;admin&lt;/i&gt;-gruppen. Denne regel, hvis den altså er arvet fra en kanal, vil give en bruger skrive-rettigheder, hvis han tilhører &lt;i&gt;admin&lt;/i&gt;-gruppen i den kanal, også selvom brugeren ikke tilhører &lt;i&gt;admin&lt;/i&gt;-gruppen i den kanal, hvor den oprindelige ACL er sat.&lt;br /&gt;Hvis et gruppenavn starter med et &apos;!&apos;, bliver gruppens medlemskab ophævet, og hvis det starter med &apos;~&apos;, bliver gruppen evalueret i kanalen, hvor dens ACL er defineret i, i stedet for kanalen hvor dens ACL er aktiv i.&lt;br /&gt;Hvis et gruppenavn starter med en &apos;#&apos;, bliver det aflæst som et adgangsudtryk. Brugere skal have indtastet dét, der står efter &apos;#&apos;, i deres liste over adgangsudtryk for at matche. Dette kan bruges til meget simpel adgangskodebaseret adgang til kanaler, for brugere der ikke er autentificeret.&lt;br /&gt;Hvis et gruppenavn starter med &apos;$&apos;, vil det kun matche brugere, hvis certifikat-hash matcher dét, der kommer efter &apos;$&apos;.&lt;br /&gt;Nogle få specielle foruddefinerede grupper er:&lt;br /&gt;&lt;b&gt;all&lt;/b&gt; - Alle vil matche.&lt;br /&gt;&lt;b&gt;auth&lt;/b&gt; - Alle autentificerede brugere vil matche.&lt;br /&gt;&lt;b&gt;sub,a,b,c&lt;/b&gt; - Brugere der i øjeblikket er i en underkanal med minimum &lt;i&gt;a&lt;/i&gt; fælles forældre, og mellem &lt;i&gt;b&lt;/i&gt; og &lt;i&gt;c&lt;/i&gt; kanaler ned ad rækken. Se webstedet for mere omfattende dokumentation relateret til dette.&lt;br /&gt;&lt;b&gt;in&lt;/b&gt; - Brugere der i øjeblikket er i kanalen vil matche (en fordel for &apos;&lt;i&gt;sub,0,0,0&lt;/i&gt;&apos;).&lt;br /&gt;&lt;b&gt;out&lt;/b&gt; - Brugere uden for kanalen vil matche (en fordel for &apos;&lt;i&gt;!sub,0,0,0&lt;/i&gt;&apos;).&lt;br /&gt;Bemærk at en indtastning gælder for enten en bruger eller en gruppe men aldrig begge.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Password&lt;/b&gt;&lt;br /&gt;This field allows you to easily set and change the password of a channel. It uses Mumble&apos;s access tokens feature in the background. Use ACLs and groups if you need more fine grained and powerful access control.</source>
        <translation>&lt;b&gt;Adgangskode&lt;/b&gt;&lt;br /&gt;Dette felt giver dig mulighed for at indstille og ændre adgangskoden for en kanal. Det bruger Mumble&apos;s adgangsudtryk-funktion i baggrunden. Brug ACLs og grupper hvis du har brug for mere finjusteret og kraftfuld adgangskontrol.</translation>
    </message>
    <message>
        <location/>
        <source>This shows all the entries active on this channel. Entries inherited from parent channels will be shown in italics.&lt;br /&gt;ACLs are evaluated top to bottom, meaning priority increases as you move down the list.</source>
        <translation>Dette viser alle aktive regler for denne kanal. Regler arvet fra forælderkanaler vil vises med kursiv.&lt;br /&gt;ACLs bliver evalueret oppefra og ned, hvilket vil sige at prioriteringen forøges, når du rykker en regel ned ad listen.</translation>
    </message>
    <message>
        <location/>
        <source>ID of the channel.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>ChannelID</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ALSAAudioInput</name>
    <message>
        <location filename="ALSAAudio.cpp" line="+174"/>
        <source>Default ALSA Card</source>
        <translation>Standard ALSA-kort</translation>
    </message>
    <message>
        <location line="+191"/>
        <source>Opening chosen ALSA Input failed: %1</source>
        <translation>Åbning af valgte ALSA-afspilning mislykkedes: %1</translation>
    </message>
</context>
<context>
    <name>ALSAAudioOutput</name>
    <message>
        <location line="-190"/>
        <source>Default ALSA Card</source>
        <translation>Standard ALSA-kort</translation>
    </message>
    <message>
        <location line="+325"/>
        <source>Opening chosen ALSA Output failed: %1</source>
        <translation>Åbning af valgte ALSA afspilnings mislykkedes: %1</translation>
    </message>
</context>
<context>
    <name>ASIOConfig</name>
    <message>
        <location filename="ASIOInput.cpp" line="+225"/>
        <source>%1 (version %2)</source>
        <translation>%1 (version %2)</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>%1 -&gt; %2 samples buffer, with %3 sample resolution (%4 preferred) at %5 Hz</source>
        <oldsource>%1 -&gt; %2 samples buffer, with %3 sample resolution (%4 preferred) at %5Hz</oldsource>
        <translation>%1 -&gt; %2 prøvebuffer, med %3 prøveopløsning (%4 foretrukken) ved %5 Hz</translation>
    </message>
    <message>
        <location line="+43"/>
        <location line="+25"/>
        <source>ASIO Initialization failed: %1</source>
        <translation>ASIO initialisering mislykkedes: %1</translation>
    </message>
    <message>
        <location line="-21"/>
        <location line="+25"/>
        <source>Failed to instantiate ASIO driver</source>
        <translation>Instantiering af ASIO-driver mislykkedes</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>ASIO</source>
        <translation>ASIO</translation>
    </message>
    <message>
        <location filename="ASIOInput.ui"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location/>
        <source>Device selection</source>
        <translation>Enhedsvalg</translation>
    </message>
    <message>
        <location/>
        <source>Device</source>
        <translation>Enhed</translation>
    </message>
    <message>
        <location/>
        <source>Device to use for microphone</source>
        <translation>Enhed til brug som mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>This chooses what device to query. You still need to actually query the device and select which channels to use.</source>
        <translation>Dette vælger hvilken enhed der skal forespørges. Du behøver stadig at egentlig forespørge enheden og vælge hvilke kanaler der skal bruges.</translation>
    </message>
    <message>
        <location/>
        <source>Query selected device</source>
        <translation>Forespørg valgt enhed</translation>
    </message>
    <message>
        <location/>
        <source>This queries the selected device for channels. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.</source>
        <translation>Dette forespørger den valgte enhed for kanaler. Vær opmærksom på at mange ASIO-drivere er ekstremt fejlfyldte, og at forespørge dem kan foresage et nedbrud af enten programmet eller systemet.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Query</source>
        <translation>&amp;Forespørgsel</translation>
    </message>
    <message>
        <location/>
        <source>Configure selected device</source>
        <translation>Konfigurér valgt enhed</translation>
    </message>
    <message>
        <location/>
        <source>This configures the selected device. Be aware that many ASIO drivers are buggy to the extreme, and querying them might cause a crash of either the application or the system.</source>
        <translation>Dette konfigurerer den valgte enhed. Vær opmærksom på at mange ASIO-drivere er ekstremt fejlfyldte, og at forespørge dem kan foresage et nedbrud af enten programmet eller systemet.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Configure</source>
        <translation>&amp;Konfigurér</translation>
    </message>
    <message>
        <location/>
        <source>Capabilities</source>
        <translation>Evner</translation>
    </message>
    <message>
        <location/>
        <source>Driver name</source>
        <translation>Drivernavn</translation>
    </message>
    <message>
        <location/>
        <source>Buffer size</source>
        <translation>Bufferstørrelse</translation>
    </message>
    <message>
        <location/>
        <source>This will configure the input channels for ASIO. Make sure you select at least one channel as microphone and speaker. &lt;i&gt;Microphone&lt;/i&gt; should be where your microphone is attached, and &lt;i&gt;Speaker&lt;/i&gt; should be a channel that samples &apos;&lt;i&gt;What you hear&lt;/i&gt;&apos;.&lt;br /&gt;For example, on the Audigy 2 ZS, a good selection for Microphone would be &apos;&lt;i&gt;Mic L&lt;/i&gt;&apos; while Speaker should be &apos;&lt;i&gt;Mix L&lt;/i&gt;&apos; and &apos;&lt;i&gt;Mix R&lt;/i&gt;&apos;.</source>
        <translation>Dette vil konfigurere indspilningskanalerne for ASIO. Vær sikker på at du har valgt mindst én kanal som mikrofon og højtaler. &lt;i&gt;Mikrofon&lt;/i&gt; skal være hvor din mikrofon er fastgjort, og &lt;i&gt;højtaler&lt;/i&gt; skal være en kanal afprøver &apos;&lt;i&gt;hvad du hører&lt;/i&gt;&apos;.&lt;br /&gt;For eksempel på Audigy 2 ZS&apos;en ville et godt valg for mikrofon være &apos;&lt;i&gt;Mic L&lt;/i&gt;&apos; mens højtaler skal være &apos;&lt;i&gt;Mix L&lt;/i&gt;&apos; og &apos;&lt;i&gt;Mix R&lt;/i&gt;&apos;.</translation>
    </message>
    <message>
        <location/>
        <source>Configure input channels</source>
        <translation>Konfigurér indspilningskanaler</translation>
    </message>
    <message>
        <location/>
        <source>Channels</source>
        <translation>Kanaler</translation>
    </message>
    <message>
        <location/>
        <source>Microphone</source>
        <translation>Mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>&lt;-</source>
        <translation>&lt;-</translation>
    </message>
    <message>
        <location/>
        <source>-&gt;</source>
        <translation>-&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Unused</source>
        <translation>Ubenyttet</translation>
    </message>
    <message>
        <location/>
        <source>Speakers</source>
        <translation>Højtalere</translation>
    </message>
</context>
<context>
    <name>ASIOInput</name>
    <message>
        <location filename="ASIOInput.cpp" line="+78"/>
        <source>You need to select at least one microphone and one speaker source to use ASIO. If you just need microphone sampling, use DirectSound.</source>
        <translation>Du skal vælge mindst én mikrofon- og én højtalerkilde til at bruge ASIO. Hvis du kun behøver mikrofon-sampling, så brug DirectSound.</translation>
    </message>
    <message>
        <location line="+104"/>
        <source>Opening selected ASIO device failed. No input will be done.</source>
        <translation>Åbning af valgte ASIO-enhed mislykkedes. Ingen indspilning vil blive udført.</translation>
    </message>
</context>
<context>
    <name>AboutDialog</name>
    <message>
        <location filename="About.cpp" line="+40"/>
        <source>About Mumble</source>
        <translation>Om Mumble</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>&lt;h3&gt;Mumble (%1)&lt;/h3&gt;&lt;p&gt;Copyright %3 Thorvald Natvig&lt;br /&gt;slicer@users.sourceforge.net&lt;/p&gt;&lt;p&gt;&lt;b&gt;A voice-chat utility for gamers&lt;/b&gt;&lt;/p&gt;&lt;p&gt;&lt;tt&gt;&lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;&lt;/tt&gt;&lt;/p&gt;</source>
        <translation>&lt;h3&gt;Mumble (%1)&lt;/h3&gt;&lt;p&gt;Copyright %3 Thorvald Natvig&lt;br /&gt;slicer@users.sourceforge.net&lt;/p&gt;&lt;p&gt;Dansk oversættelse af Jonathan E. Hansen&lt;br /&gt;zentriple@users.sourceforge.net&lt;/p&gt;&lt;p&gt;&lt;b&gt;Et stemmebaseret chat-program for gamere&lt;/b&gt;&lt;/p&gt;&lt;p&gt;&lt;tt&gt;&lt;a href=&quot;%2&quot;&gt;%2&lt;/a&gt;&lt;/tt&gt;&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>&amp;About Mumble</source>
        <translation>&amp;Om Mumble</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&amp;License</source>
        <translation>&amp;Licens</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>3rd &amp;party licenses</source>
        <translation>Tredje&amp;partslicenser</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
</context>
<context>
    <name>AudioInput</name>
    <message>
        <location filename="AudioInput.ui"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location/>
        <source>Interface</source>
        <translation>Grænseflade</translation>
    </message>
    <message>
        <location/>
        <source>System</source>
        <translation>System</translation>
    </message>
    <message>
        <location/>
        <source>Input method for audio</source>
        <translation>Indspilningsmetode for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the input method to use for audio.&lt;/b&gt;&lt;br /&gt;Most likely you want to use DirectSound.</source>
        <translation>&lt;b&gt;Indspilningsmetoden der skal bruges for lyd.&lt;/b&gt;&lt;br /&gt;Du skal højest sansynligt bruge DirectSound.</translation>
    </message>
    <message>
        <location/>
        <source>Device</source>
        <translation>Enhed</translation>
    </message>
    <message>
        <location/>
        <source>Input device for audio</source>
        <translation>Indspilningsenhed for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the input device to use for audio.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Dette er indspilningsenheden der skal bruges for lyd.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Transmission</source>
        <translation>Transmission</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Transmit</source>
        <translation>&amp;Transmittér lyd</translation>
    </message>
    <message>
        <location/>
        <source>When to transmit your speech</source>
        <translation>Hvornår din tale skal transmitteres</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets when speech should be transmitted.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;Continuous&lt;/i&gt; - All the time&lt;br /&gt;&lt;i&gt;Voice Activity&lt;/i&gt; - When you are speaking clearly.&lt;br /&gt;&lt;i&gt;Push To Talk&lt;/i&gt; - When you hold down the hotkey set under &lt;i&gt;Shortcuts&lt;/i&gt;.</source>
        <translation>&lt;b&gt;Dette indstiller hvornår tale skal transmitteres.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;Uafbrudt&lt;/i&gt; - Hele tiden&lt;br /&gt;&lt;i&gt;Stemmeaktivering&lt;/i&gt; - Når du taler klart.&lt;br /&gt;&lt;i&gt;Tryk-for-snak&lt;/i&gt; - Når du holder en genvejsknap nede, som du har indstilt under &lt;i&gt;Genveje&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>DoublePush Time</source>
        <translation>Dobbelttryk-tid</translation>
    </message>
    <message>
        <location/>
        <source>If you press the PTT key twice in this time it will get locked.</source>
        <translation>Hvis du trykker to gange på tryk-for-snak-knappen inden for denne tid, vil den blive låst.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;DoublePush Time&lt;/b&gt;&lt;br /&gt;If you press the push-to-talk key twice during the configured interval of time it will be locked. Mumble will keep transmitting until you hit the key once more to unlock PTT again.</source>
        <translation>&lt;b&gt;Dobbelttryk-tid&lt;/b&gt;&lt;br /&gt;Hvis du trykker tryk-for-snak-knappen to gange i løbet af af det konfigurerede tidsinterval, vil den blive låst. Mumble vil fortsætte med at transmittere lyd, indtil du trykker knappen én gang mere, hvilket låser tryk-for-snak-knappen op igen.</translation>
    </message>
    <message>
        <location/>
        <source>Reset audio cue to default</source>
        <translation>Nulstil lydsignal til standard</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Reset&lt;/b&gt;&lt;br/&gt;Reset the paths for the files to their default.</source>
        <translation>&lt;b&gt;Nulstil&lt;/b&gt;&lt;br/&gt;Nulstiller stien for filerne til standard.</translation>
    </message>
    <message>
        <location/>
        <source>Browse for on audio file</source>
        <translation>Gennemse for en &lt;i&gt;til&lt;/i&gt;-lydfil</translation>
    </message>
    <message>
        <location/>
        <source>Browse for off audio file</source>
        <translation>Gennemse for en &lt;i&gt;fra&lt;/i&gt;-lydfil</translation>
    </message>
    <message>
        <location/>
        <source>Off</source>
        <translation>Fra</translation>
    </message>
    <message>
        <location/>
        <source>On</source>
        <translation>Til</translation>
    </message>
    <message>
        <location/>
        <source>Preview the audio cues</source>
        <translation>Afprøv lydsignalet</translation>
    </message>
    <message>
        <location/>
        <source>Use SNR based speech detection</source>
        <translation>Brug signal-til-støj-baseret stemmeaktivering</translation>
    </message>
    <message>
        <location/>
        <source>Signal to Noise</source>
        <translation>Signal til støj</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets speech detection to use Amplitude.&lt;/b&gt;&lt;br /&gt;In this mode, the raw strength of the input signal is used to detect speech.</source>
        <translation>&lt;b&gt;Dette indstiller stemmeaktiveringen der skal bruges ved &lt;i&gt;Forstærkning&lt;/i&gt;&lt;/b&gt;&lt;br /&gt;I denne tilstand, bruges den rå kraft fra indspilningssignalet til at detektere tale.</translation>
    </message>
    <message>
        <location/>
        <source>Amplitude</source>
        <translation>Forstærk</translation>
    </message>
    <message>
        <location/>
        <source>Voice &amp;Hold</source>
        <translation>Lyd &amp;Hold</translation>
    </message>
    <message>
        <location/>
        <source>How long to keep transmitting after silence</source>
        <translation>Hvor lang tid skal der fortsat transmitteres, efter der er blevet stille</translation>
    </message>
    <message>
        <location/>
        <source>Silence Below</source>
        <translation>Stilhed under</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the trigger values for voice detection.&lt;/b&gt;&lt;br /&gt;Use this together with the Audio Statistics window to manually tune the trigger values for detecting speech. Input values below &quot;Silence Below&quot; always count as silence. Values above &quot;Speech Above&quot; always count as voice. Values in between will count as voice if you&apos;re already talking, but will not trigger a new detection.</source>
        <translation>&lt;b&gt;Dette indstiller værdien der udløser stemmeaktivering.&lt;/b&gt;&lt;br /&gt;Brug denne, sammen med lydstatistikker-vinduet, for manuelt at indstille værdierne der udløser stemmeaktivering. Indspilnings-værdierne under &quot;Stilhed under&quot; tæller altid som stilhed. Værdier over &quot;Tale over&quot; tæller altid som stemme. Værdier i mellem vil tælle som stemme, hvis du allerede taler, men vil ikke udløse en ny aktivering.</translation>
    </message>
    <message>
        <location/>
        <source>Speech Above</source>
        <translation>Tale over</translation>
    </message>
    <message>
        <location/>
        <source>Signal values above this count as voice</source>
        <translation>Signal-værdier over dette tæller som stemme</translation>
    </message>
    <message>
        <location/>
        <source>Compression</source>
        <translation>Komprimering</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Quality</source>
        <translation>&amp;Kvalitet</translation>
    </message>
    <message>
        <location/>
        <source>Quality of compression (peak bandwidth)</source>
        <translation>Kvalitet af komprimering (maksimal båndbredde)</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the quality of compression.&lt;/b&gt;&lt;br /&gt;This determines how much bandwidth Mumble is allowed to use for outgoing audio.</source>
        <translation>&lt;b&gt;Dette indstiller kvaliteten af komprimeringen.&lt;/b&gt;&lt;br /&gt;Dette fastslår hvor meget båndbredde Mumble må bruge til udgående lyd.</translation>
    </message>
    <message>
        <location/>
        <source>Audio per packet</source>
        <translation>Lyd per pakke</translation>
    </message>
    <message>
        <location/>
        <source>How many audio frames to send per packet</source>
        <translation>Hvor mange lyd-frames der skal sendes per pakke</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This selects how many audio frames should be put in one packet.&lt;/b&gt;&lt;br /&gt;Increasing this will increase the latency of your voice, but will also reduce bandwidth requirements.</source>
        <translation>&lt;b&gt;Dette indstiller hvor mange lyd-frames der skal puttes i én pakke.&lt;/b&gt;&lt;br /&gt;Forøgelse af dette vil øge forsinkelsen af din stemme, men vil også reducere båndbredde-krav.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This shows peak outgoing bandwidth used.&lt;/b&gt;&lt;br /&gt;This shows the peak amount of bandwidth sent out from your machine. Audio bitrate is the maximum bitrate (as we use VBR) for the audio data alone. Position is the bitrate used for positional information. Overhead is our framing and the IP packet headers (IP and UDP is 75% of this overhead).</source>
        <translation>&lt;b&gt;Dette viser den maksimale udgående båndbredde-brug.&lt;/b&gt;&lt;br /&gt;Dette viser den maksimale mængde båndbredde, der bliver sendt fra din maskine. Lyd-bitrate er den maksimale bitrate (eftersom vi bruger VBR) for alene lyddata. &lt;i&gt;Placering&lt;/i&gt; er bitrate&apos;en der bliver brugt til placeringsinformation. &lt;i&gt;Tab&lt;/i&gt; er vores framing og IP-pakke-headers (IP og UDP er 75% af denne overhead).</translation>
    </message>
    <message>
        <location/>
        <source>Audio Processing</source>
        <translation>Lydbehandling</translation>
    </message>
    <message>
        <location/>
        <source>Noise Suppression</source>
        <translation>Støjdæmpning</translation>
    </message>
    <message>
        <location/>
        <source>Noise suppression</source>
        <translation>Støjdæmpning</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the amount of noise suppression to apply.&lt;/b&gt;&lt;br /&gt;The higher this value, the more aggressively stationary noise will be suppressed.</source>
        <translation>&lt;b&gt;Dette indstiller hvor meget støjdæmpning der skal anvendes.&lt;/b&gt;&lt;br /&gt;Jo højere denne værdi er, des mere aggressivt vil stationær støj blive dæmpet.</translation>
    </message>
    <message>
        <location/>
        <source>Maximum amplification of input sound</source>
        <translation>Maksimal forstærkning af indspilningslyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Maximum amplification of input.&lt;/b&gt;&lt;br /&gt;Mumble normalizes the input volume before compressing, and this sets how much it&apos;s allowed to amplify.&lt;br /&gt;The actual level is continually updated based on your current speech pattern, but it will never go above the level specified here.&lt;br /&gt;If the &lt;i&gt;Microphone loudness&lt;/i&gt; level of the audio statistics hover around 100%, you probably want to set this to 2.0 or so, but if, like most people, you are unable to reach 100%, set this to something much higher.&lt;br /&gt;Ideally, set it so &lt;i&gt;Microphone Loudness * Amplification Factor &gt;= 100&lt;/i&gt;, even when you&apos;re speaking really soft.&lt;br /&gt;&lt;br /&gt;Note that there is no harm in setting this to maximum, but Mumble will start picking up other conversations if you leave it to auto-tune to that level.</source>
        <translation>&lt;b&gt;Maksimal forstærkning af indspilning&lt;/b&gt;&lt;br /&gt;Mumble normaliserer inspilnings-lydstyrken før komprimering, og dette indstiller hvor meget Mumble må forstærke.&lt;br /&gt;Det egentlige niveau bliver hele tiden opdateret baseret på det nuværende talemønster, men det vil aldrig komme over niveauet angivet hér.&lt;br /&gt;Hvis &lt;i&gt;Mikrofon lydstyrke&lt;/i&gt;-niveauet ligger omkring 100%, skal du sandsynligvis sætte denne til 2.0 eller deromkring, men hvis du som de fleste folk ikke er i stand til at opnå 100%, skal du sætte denne til noget meget højere.&lt;br /&gt;Ideelt skal du sætte den til &lt;i&gt;Mikrofon lydstyrke * forstærkning faktor &gt;= 100&lt;/i&gt;, selv når du taler dæmpet.&lt;br /&gt;&lt;br /&gt;Bemærk at det ikke gør noget, hvis du sætter denne til maksimum, men Mumble vil begynde at opsamle andre samtaler, hvis du lader den automatisk tune i dette niveau.</translation>
    </message>
    <message>
        <location/>
        <source>Current speech detection chance</source>
        <translation>Nuværende stemmeaktiverings-sansynlighed</translation>
    </message>
    <message>
        <location/>
        <source>Cancel echo from speakers</source>
        <translation>Eliminér ekko fra højtalere</translation>
    </message>
    <message>
        <location/>
        <source>Enabling this will cancel the echo from your speakers. Mixed has low CPU impact, but only works well if your speakers are equally loud and equidistant from the microphone. Multichannel echo cancellation provides much better echo cancellation, but at a higher CPU cost.</source>
        <translation>Aktivering af dette vil eliminere ekko fra din højtalere. &lt;i&gt;Blandet&lt;/i&gt; forbruger ikke så meget CPU, men vil kun virke godt, hvis dine højtalere er lige høje og lige langt væk fra din mikrofon. &lt;i&gt;Multikanal&lt;/i&gt;-ekkoeliminering giver meget bedre ekkoeliminering, men ved et højere CPU-forbrug.</translation>
    </message>
    <message>
        <location/>
        <source>Disabled</source>
        <translation>Deaktiveret</translation>
    </message>
    <message>
        <location/>
        <source>Mixed</source>
        <translation>Blandet</translation>
    </message>
    <message>
        <location/>
        <source>Multichannel</source>
        <translation>Multikanal</translation>
    </message>
    <message>
        <location/>
        <source>Echo</source>
        <translation>Ekkoeliminering</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets speech detection to use Signal to Noise ratio.&lt;/b&gt;&lt;br /&gt;In this mode, the input is analyzed for something resembling a clear signal, and the clarity of that signal is used to trigger speech detection.</source>
        <translation>&lt;b&gt;Dette indstiller stemmeaktivering til at bruge Signal til støj forhold.&lt;/b&gt;&lt;br /&gt;I denne tilstand, er indspilningen analyseret for noget der minder om rent signal, og klarhed af signalet er brugt til udløse stemmeaktivering.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This shows the current speech detection settings.&lt;/b&gt;&lt;br /&gt;You can change the settings from the Settings dialog or from the Audio Wizard.</source>
        <translation>&lt;b&gt;Dette viser de nuværende stemmeaktiverings-indstillinger.&lt;/b&gt;&lt;br /&gt;Du kan ændre indstillingerne fra &quot;Indstillinger&quot;-dialogboksen eller fra lydguiden.</translation>
    </message>
    <message>
        <location/>
        <source>Signal values below this count as silence</source>
        <translation>Signalværdier under dette tæller som stilhed</translation>
    </message>
    <message>
        <location/>
        <source>Maximum bandwidth used for sending audio</source>
        <translation>Maksimal båndbredde ved afsendelse af lyd</translation>
    </message>
    <message>
        <location/>
        <source>Use Amplitude based speech detection</source>
        <translation>Brug styke-baseret stemmegenkendelse</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This selects how long after a perceived stop in speech transmission should continue.&lt;/b&gt;&lt;br /&gt;Set this higher if your voice breaks up when you speak (seen by a rapidly blinking voice icon next to your name).</source>
        <translation>&lt;b&gt;Dette indstiller hvor længe transmissionen skal fortsætte efter et opfattet stop.&lt;/b&gt;&lt;br /&gt;Indstil denne højere hvis din stemme afbrydes, når du snakker (det ses ved at lydikonet ved siden af dit navn blinker hurtigt).</translation>
    </message>
    <message>
        <location/>
        <source>Exclusive mode</source>
        <translation>Eneretstilstand</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This opens the device in exclusive mode.&lt;/b&gt;&lt;br /&gt;No other application will be able to use the device.</source>
        <translation>&lt;b&gt;Dette giver eneret over enheden.&lt;/b&gt;&lt;br /&gt;Ingen andre programmer vil være i stand til at bruge enheden.</translation>
    </message>
    <message>
        <location/>
        <source>Exclusive</source>
        <translation>Eneret</translation>
    </message>
    <message>
        <location/>
        <source>R&amp;eset</source>
        <translation>&amp;Nulstil</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Browse...</source>
        <translation>&amp;Gennemse...</translation>
    </message>
    <message>
        <location/>
        <source>B&amp;rowse...</source>
        <translation>&amp;Gennemse...</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Preview</source>
        <translation>&amp;Afprøv</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Preview&lt;/b&gt;&lt;br/&gt;Plays the current &lt;i&gt;on&lt;/i&gt; sound followed by the current &lt;i&gt;off&lt;/i&gt; sound.</source>
        <translation>&lt;b&gt;Afprøv&lt;/b&gt;&lt;br/&gt;Afspiller den nuværende &lt;i&gt;til&lt;/i&gt;-lydfil efterfulgt af den nuværende &lt;i&gt;fra&lt;/i&gt;-lydfil.</translation>
    </message>
    <message>
        <location/>
        <source>Displays an always on top window with a push to talk button in it</source>
        <translation>Vis en vindue der altid er øverst og har en tryk-tryk-for-snak knap i det</translation>
    </message>
    <message>
        <location/>
        <source>Display push to talk window</source>
        <translation>Vis tryk-for-snak-vindue</translation>
    </message>
    <message>
        <location/>
        <source>Misc</source>
        <translation>Diverse</translation>
    </message>
    <message>
        <location/>
        <source>Audible audio cue when starting or stopping to transmit</source>
        <translation>Hørbart lydsignal når transmittering startes og stoppes</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This enables transmission audio cues.&lt;/b&gt;&lt;br /&gt;Setting this will give you a short audio beep when you start and stop transmitting.</source>
        <translation>&lt;b&gt;Dette aktiverer transmissions-lydsignal.&lt;/b&gt;&lt;br /&gt;Aktivering af dette vil give dig en kort biplyd, når du starter og stopper transmittering.</translation>
    </message>
    <message>
        <location/>
        <source>Audio cue</source>
        <translation>Lydsignal</translation>
    </message>
    <message>
        <location/>
        <source>Gets played when starting to transmit</source>
        <translation>Bliver afspillet når transmittering starter</translation>
    </message>
    <message>
        <location/>
        <source>Gets played when stopping to transmit</source>
        <translation>Bliver afspillet når transmittering stopper</translation>
    </message>
    <message>
        <location/>
        <source>Hold Time</source>
        <translation>Fasthold-tid</translation>
    </message>
    <message>
        <location/>
        <source>Time the microphone stays open after the PTT key is released</source>
        <translation>Tiden hvor mikrofonen forbliver aktiv efter tryk-for-snak-knappen er sluppet</translation>
    </message>
    <message>
        <location filename="AudioInput.cpp" line="+529"/>
        <source>Server maximum network bandwidth is only %1 kbit/s. Audio quality auto-adjusted to %2 kbit/s (%3 ms)</source>
        <translation>Serverens maksimale netværksbåndbredde er kun %1 kbit/s. Lydkvaliteten blev automatisk justeret til %2 kbit/s (%3 ms)</translation>
    </message>
    <message>
        <location filename="AudioInput.ui"/>
        <source>Max. Amplification</source>
        <translation>Max forstærkning</translation>
    </message>
    <message>
        <location/>
        <source>Idle action</source>
        <translation>Inaktiv handling</translation>
    </message>
    <message>
        <location/>
        <source>minutes do</source>
        <translation>minutter udfør</translation>
    </message>
    <message>
        <location/>
        <source>nothing</source>
        <translation>intet</translation>
    </message>
    <message>
        <location/>
        <source>deafen</source>
        <translation>deaktivér lyd</translation>
    </message>
    <message>
        <location/>
        <source>mute</source>
        <translation>deaktivér mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>after</source>
        <translation>efter</translation>
    </message>
</context>
<context>
    <name>AudioInputDialog</name>
    <message>
        <location filename="AudioConfigDialog.cpp" line="+75"/>
        <source>Continuous</source>
        <translation>Uafbrudt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Voice Activity</source>
        <translation>Stemmeaktivering</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Push To Talk</source>
        <translation>Tryk for snak</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Audio Input</source>
        <translation>Lydindspilning</translation>
    </message>
    <message>
        <location line="+111"/>
        <location line="+8"/>
        <location line="+7"/>
        <source>%1 ms</source>
        <translation>%1 ms</translation>
    </message>
    <message>
        <location line="-9"/>
        <location line="+7"/>
        <location line="+20"/>
        <source>Off</source>
        <translation>Fra</translation>
    </message>
    <message>
        <location line="-12"/>
        <source>%1 s</source>
        <translation>%1 s</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>%1 kb/s</source>
        <translation>%1 kb/s</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>-%1 dB</source>
        <translation>-%1 dB</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>%1 kbit/s (Audio %2, Position %4, Overhead %3)</source>
        <translation>%1 kbit/s (Lyd %2, Placering %4, Overhead %3)</translation>
    </message>
</context>
<context>
    <name>AudioOutput</name>
    <message>
        <location filename="AudioOutput.ui"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location/>
        <source>Interface</source>
        <translation>Grænseflade</translation>
    </message>
    <message>
        <location/>
        <source>System</source>
        <translation>System</translation>
    </message>
    <message>
        <location/>
        <source>Output method for audio</source>
        <translation>Afspilningsmetode for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the output method to use for audio.&lt;/b&gt;&lt;br /&gt;Most likely you want to use DirectSound.</source>
        <oldsource>&lt;b&gt;This is the input method to use for audio.&lt;/b&gt;&lt;br /&gt;Most likely you want to use DirectSound.</oldsource>
        <translation>&lt;b&gt;Dette er afspilningsmetoden der skal bruges for lyd&lt;/b&gt;&lt;br /&gt;Du skal højest sansynligt bruge DirectSound.</translation>
    </message>
    <message>
        <location/>
        <source>Device</source>
        <translation>Enhed</translation>
    </message>
    <message>
        <location/>
        <source>Output device for audio</source>
        <translation>Afspilningsenhed for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the output device to use for audio.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Dette er afspilningsenheden der skal bruges for lyd.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Positional Audio</source>
        <translation>Placeringsbestemt lyd</translation>
    </message>
    <message>
        <location/>
        <source>Audio Output</source>
        <translation>Lydafspilning</translation>
    </message>
    <message>
        <location/>
        <source>Default &amp;Jitter Buffer</source>
        <translation>Standard &amp;flimmerbuffer</translation>
    </message>
    <message>
        <location/>
        <source>Safety margin for jitter buffer</source>
        <translation>Sikkerhedsmargin for flimmerbuffer</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the minimum safety margin for the jitter buffer.&lt;/b&gt;&lt;br /&gt;All incoming audio is buffered, and the jitter buffer continually tries to push the buffer to the minimum sustainable by your network, so latency can be as low as possible. This sets the minimum buffer size to use. If the start of sentences you hear is very jittery, increase this value.</source>
        <translation>&lt;b&gt;Dette indstiller den minimale sikkerhedsmargen for flimmer-bufferen.&lt;/b&gt;&lt;br /&gt;Alt indgående lyd er buffet, og flimmer-bufferen prøver uafbrudt at presse bufferen til det minimale opretholdelige af dit netværk, så forsinkelsen kan være så lille som muligt. Dette indstiller den minimale buffer-størrelse der kan bruges. Hvis starten af sætninger, du hører, er meget flimrende, så forøg denne værdi.</translation>
    </message>
    <message>
        <location/>
        <source>Attenuate applications by...</source>
        <translation>Dæmp andre programmer med...</translation>
    </message>
    <message>
        <location/>
        <source>Attenuation of other applications during speech</source>
        <translation>Dæmpning af andre programmer når der snakkes</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Attenuate volume of other applications during speech&lt;/b&gt;&lt;br /&gt;Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This sets the attenuation of other applications if the feature is enabled.</source>
        <translation>&lt;b&gt;Dæmp lydstyrke for andre programmer når der tales&lt;/b&gt;&lt;br /&gt;Mumble giver mulighed for at formindske lydstyrken af andre programmer under indgående og/eller udgående tale. Dette indstillinger dæmpningen af andre programmer, hvis funktionen er aktiveret.</translation>
    </message>
    <message>
        <location/>
        <source>If checked Mumble lowers the volume of other applications while other users talk</source>
        <translation>Hvis denne er markeret, vil Mumble dæmpe lydstyrken af andre programmer, når andre brugere snakker</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Attenuate applications while other users talk&lt;/b&gt;&lt;br /&gt;Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while other users talk to you.</source>
        <translation>&lt;b&gt;Dæmp programmer når andre brugere snakker&lt;/b&gt;&lt;br /&gt;Mumble giver mulighed for at formindske lydstyrken af andre programmer under indgående og/eller udgående tale. Dette får Mumble til at aktivere funktionen, når andre brugere snakker til dig.</translation>
    </message>
    <message>
        <location/>
        <source>while other users talk</source>
        <translation>når andre brugere snakker</translation>
    </message>
    <message>
        <location/>
        <source>If checked Mumble lowers the volume of other applications while you talk</source>
        <translation>Hvis denne er markeret, vil Mumble dæmpe lydstyrken af andre programmer, når du snakker</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Attenuate applications while you talk&lt;/b&gt;&lt;br /&gt;Mumble supports decreasing the volume of other applications during incoming and/or outgoing speech. This makes mumble activate the feature while you talk.</source>
        <translation>&lt;b&gt;Dæmp programmer når du snakker&lt;/b&gt;&lt;br /&gt;Mumble giver mulighed for at formindske lydstyrken af andre programmer under indgående og/eller udgående tale. Dette får Mumble til at aktivere funktionen, når du snakker.</translation>
    </message>
    <message>
        <location/>
        <source>while you talk</source>
        <translation>når du snakker</translation>
    </message>
    <message>
        <location/>
        <source>Minimum distance to user before sound volume decreases</source>
        <translation>Minimum afstand til bruger før lydstyrken reduceres</translation>
    </message>
    <message>
        <location/>
        <source>This sets the minimum distance for sound calculations. The volume of other users&apos; speech will not decrease until they are at least this far away from you.</source>
        <translation>Dette indstiller den minimale distance for lydberegninger. Lydstyrken fra andre brugeres tale vil ikke formindskes før de er mindst dette væk fra dig.</translation>
    </message>
    <message>
        <location/>
        <source>This sets the maximum distance for sound calculations. When farther away than this, other users&apos; speech volume will not decrease any further.</source>
        <translation>Dette indstiller den maksimale distance for lydberegninger. Hvis længere væk end dette, vil andre brugeres talelydstyrke ikke formindskes yderligere.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This enables one of the loopback test modes.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;None&lt;/i&gt; - Loopback disabled&lt;br /&gt;&lt;i&gt;Local&lt;/i&gt; - Emulate a local server.&lt;br /&gt;&lt;i&gt;Server&lt;/i&gt; - Request loopback from server.&lt;br /&gt;Please note than when loopback is enabled, no other users will hear your voice. This setting is not saved on application exit.</source>
        <translation>&lt;b&gt;Dette aktiverer én af loopback-testtilstandene.&lt;/b&gt;&lt;br /&gt;&lt;i&gt;Ingen&lt;/i&gt; - Loopback deaktiveret&lt;br /&gt;&lt;i&gt;Lokal&lt;/i&gt; - Efterlign en lokal server.&lt;br /&gt;&lt;i&gt;Server&lt;/i&gt; - Anmod om loopback fra server&lt;br /&gt;Vær opmærksom på  at når loopback er aktiveret, vil ingen andre brugere høre din stemme. Denne indstilling bliver ikke gemt, når programmet afsluttes.</translation>
    </message>
    <message>
        <location/>
        <source>Volume</source>
        <translation>Lydstyrke</translation>
    </message>
    <message>
        <location/>
        <source>Volume of incoming speech</source>
        <translation>Lydstyrke for indgående tale</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This adjusts the volume of incoming speech.&lt;/b&gt;&lt;br /&gt;Note that if you increase this beyond 100%, audio will be distorted.</source>
        <translation>&lt;b&gt;Dette justere lydstyrken af ingående tale.&lt;/b&gt;&lt;br /&gt;Vær opmærksom på, at hvis du for forøger den endnu mere end 100%, vil lyden blive forvrænget.</translation>
    </message>
    <message>
        <location/>
        <source>Output Delay</source>
        <translation>Afspilningsforsinkelse</translation>
    </message>
    <message>
        <location/>
        <source>Amount of data to buffer</source>
        <translation>Mængde af data der skal buffers</translation>
    </message>
    <message>
        <location/>
        <source>The connected &quot;speakers&quot; are actually headphones</source>
        <oldsource>The connected &quot;speakers&quot; are actually headphones.</oldsource>
        <translation>De forbundne &quot;højtalere&quot; er rent faktisk et headset</translation>
    </message>
    <message>
        <location/>
        <source>Factor for sound volume decrease</source>
        <translation>Faktor for lydstyrke formindskelse</translation>
    </message>
    <message>
        <location/>
        <source>Bloom</source>
        <translation>Bloom</translation>
    </message>
    <message>
        <location/>
        <source>Factor for sound volume increase</source>
        <translation>Faktor for lydstyrkeforøgelse</translation>
    </message>
    <message>
        <location/>
        <source>How much should sound volume increase for sources that are really close?</source>
        <translation>Hvor meget skal lydstyrken forhøjes for kilder der er rigtig tæt på?</translation>
    </message>
    <message>
        <location/>
        <source>Checking this indicates that you don&apos;t have speakers connected, just headphones. This is important, as speakers are usually in front of you, while headphones are directly to your left/right.</source>
        <translation>Markering af denne indikerer, at du ikke har højtalere sat til, men bare headset. Dette er vigtigt, eftersom højtalere normalt er foran dig, mens et headset sidder direkte på din højre og venstre side.</translation>
    </message>
    <message>
        <location/>
        <source>This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn&apos;t cause rapid jitter in the sound.</source>
        <translation>Dette indstiller mængden af data der skal forud-buffers i afspilningsbufferen. Eksperimentér med forskellige værdier og indstil den til det laveste som ikke forårsager flimmer i lyden.</translation>
    </message>
    <message>
        <location/>
        <source>Headphones</source>
        <translation>Headset</translation>
    </message>
    <message>
        <location/>
        <source>Minimum Distance</source>
        <translation>Minimum distance</translation>
    </message>
    <message>
        <location/>
        <source>Maximum Distance</source>
        <translation>Maksimal distance</translation>
    </message>
    <message>
        <location/>
        <source>Maximum distance, beyond which speech volume won&apos;t decrease</source>
        <translation>Maksimal afstand, hvor tale-lydstyrken udover denne afstand ikke reduceres</translation>
    </message>
    <message>
        <location/>
        <source>Minimum Volume</source>
        <translation>Minimal lydstyrke</translation>
    </message>
    <message>
        <location/>
        <source>What should the volume be at the maximum distance?</source>
        <translation>Hvad skal lydstyrken være ved maksimal distance?</translation>
    </message>
    <message>
        <location/>
        <source>Loopback Test</source>
        <translation>Loopback-test</translation>
    </message>
    <message>
        <location/>
        <source>Delay Variance</source>
        <translation>Forsinkelse varians</translation>
    </message>
    <message>
        <location/>
        <source>Variance in packet latency</source>
        <translation>Variation i pakkeforsinkelse</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the packet latency variance for loopback testing.&lt;/b&gt;&lt;br /&gt;Most audio paths contain some variable latency. This allows you to set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.</source>
        <oldsource>&lt;b&gt;This sets the packet latency variance for loopback testing.&lt;/b&gt;&lt;br /&gt;Most audio paths contain some variable latency. This allows you set that variance for loopback mode testing. For example, if you set this to 15ms, this will emulate a network with 20-35ms ping latency or one with 80-95ms latency. Most domestic net connections have a variance of about 5ms.</oldsource>
        <translation>&lt;b&gt;Dette indstiller pakkeforsinkelses-variationen for loopback-test.&lt;/b&gt;&lt;br /&gt;De fleste lydstier inderholder noget varierende forsinkelse. Dette gør dig i stand til, at indstille den variation for loopback-tilstands-test. Hvis du fx sætter denne til 15ms, vil det svare til et netværk med 20-35ms ping forsinkelse eller 80-95ms forsinkelse. De fleste indenlandske internetforbindelser har en variation på omkring 5ms.</translation>
    </message>
    <message>
        <location/>
        <source>Packet Loss</source>
        <translation>Pakketab</translation>
    </message>
    <message>
        <location/>
        <source>Packet loss for loopback mode</source>
        <translation>Pakketab for loopback-tilstand</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the packet loss for loopback mode.&lt;/b&gt;&lt;br /&gt;This will be the ratio of packets lost. Unless your outgoing bandwidth is peaked or there&apos;s something wrong with your network connection, this will be 0%</source>
        <translation>&lt;b&gt;Dette indstiller pakketabet for loopback-tilstand.&lt;/b&gt;&lt;br /&gt;Dette vil være forholdet for tabte pakker. Medmindre din udgående båndbredde er maksimeret ud, eller der er noget galt med din netværksforbindelse, vil dette være 0%</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Loopback</source>
        <translation>&amp;Loopback</translation>
    </message>
    <message>
        <location/>
        <source>Desired loopback mode</source>
        <translation>Ønsket loopback-tilstand</translation>
    </message>
    <message>
        <location/>
        <source>Exclusive mode, not recommended.</source>
        <translation>Eneretstilstand, anbefales ikke.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This opens the device in exclusive mode.&lt;/b&gt;&lt;br /&gt;No other application will be able to use the device.</source>
        <translation>&lt;b&gt;Dette giver eneret over enheden.&lt;/b&gt;&lt;br /&gt;Ingen andre programmer vil være i stand til at bruge enheden.</translation>
    </message>
    <message>
        <location/>
        <source>Exclusive</source>
        <translation>Eneret</translation>
    </message>
    <message>
        <location/>
        <source>Priority Speaker</source>
        <translation type="unfinished">Prioriteret taler</translation>
    </message>
    <message>
        <location/>
        <source>If checked Mumble lowers the volume of other users while you talk if you have the &quot;Priority Speaker&quot; status.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Attenuate other users while talking as Priority Speaker.&lt;/b&gt;&lt;br /&gt;Mumble supports decreasing the volume of other users while you talk as the &lt;i&gt;Priority Speaker&lt;/i&gt; to avoid getting disturbed. Checking this checkbox will enable this feature.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Attenuate other users while talking as Priority Speaker.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AudioOutputDialog</name>
    <message>
        <location filename="AudioConfigDialog.cpp" line="+137"/>
        <source>None</source>
        <translation>Ingen</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Local</source>
        <translation>Lokal</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Server</source>
        <translation>Server</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Audio Output</source>
        <translation>Lydafspilning</translation>
    </message>
    <message>
        <location line="+108"/>
        <location line="+19"/>
        <location line="+8"/>
        <source>%1 ms</source>
        <translation>%1 ms</translation>
    </message>
    <message>
        <location line="-16"/>
        <location line="+4"/>
        <location line="+8"/>
        <location line="+31"/>
        <location line="+4"/>
        <source>%1 %</source>
        <translation>%1 %</translation>
    </message>
    <message>
        <location line="-16"/>
        <location line="+6"/>
        <source>%1 m</source>
        <translation>%1 m</translation>
    </message>
</context>
<context>
    <name>AudioOutputSample</name>
    <message>
        <location filename="AudioOutputSample.cpp" line="+211"/>
        <source>Choose sound file</source>
        <translation>Vælg lydfil</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Invalid sound file</source>
        <translation>Ugyldig lydfil</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>The file &apos;%1&apos; cannot be used by Mumble. Please select a file with a compatible format and encoding.</source>
        <translation>Filen &apos;%1&apos; kan ikke bruges af Mumble. Vælg venligst en fil med et kompatibelt format og kodning.</translation>
    </message>
</context>
<context>
    <name>AudioStats</name>
    <message>
        <location filename="AudioStats.cpp" line="+387"/>
        <source>&gt;1000 ms</source>
        <oldsource>&gt;1000ms</oldsource>
        <translation>&gt;1000 ms</translation>
    </message>
    <message>
        <location filename="AudioStats.ui"/>
        <source>Audio Statistics</source>
        <translation>Lydstatistikker</translation>
    </message>
    <message>
        <location/>
        <source>Input Levels</source>
        <translation>Indspilningsniveau</translation>
    </message>
    <message>
        <location/>
        <source>Peak microphone level</source>
        <translation>Maksimalt mikrofonniveau</translation>
    </message>
    <message>
        <location/>
        <source>Peak power in last frame</source>
        <translation>Maksimal kraft i sidste frame</translation>
    </message>
    <message>
        <location/>
        <source>This shows the peak power in the last frame (20 ms), and is the same measurement as you would usually find displayed as &quot;input power&quot;. Please disregard this and look at &lt;b&gt;Microphone power&lt;/b&gt; instead, which is much more steady and disregards outliers.</source>
        <translation>Dette viser den maksimale kraft i den forrige frame (20 ms), og det er den samme måling som du normalt vil finde vist som &quot;indspilningskraft&quot;. Vær venlig at ignorere dette og se i stedet på &lt;b&gt;mikrofonkraft&lt;/b&gt;, som er meget mere jævnt og ser bort fra afvigelser.</translation>
    </message>
    <message>
        <location/>
        <source>Peak speaker level</source>
        <translation>Maksimalt højtaler niveau</translation>
    </message>
    <message>
        <location/>
        <source>This shows the peak power of the speakers in the last frame (20 ms). Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you&apos;re playing audio from other programs, your setup is not working.</source>
        <oldsource>This shows the peak power in the last frame (20 ms) of the speakers. Unless you are using a multi-channel sampling method (such as ASIO) with speaker channels configured, this will be 0. If you have such a setup configured, and this still shows 0 while you&apos;re playing audio from other programs, your setup is not working.</oldsource>
        <translation>Dette viser den maksimale styrke fra højtalere i forrige frame (20 ms). Medmindre du bruger en multi-kanal-sampling metode (såsom ASIO) med konfigurerede højtalerkanaler, vil dette være 0. Hvis du har konfigureret en sådan opsætning, og denne stadig viser 0, mens du afspiller lyd fra andre programmer, virker din opsætning ikke.</translation>
    </message>
    <message>
        <location/>
        <source>Peak clean level</source>
        <translation>Maksimalt rent niveau</translation>
    </message>
    <message>
        <location/>
        <source>This shows the peak power in the last frame (20 ms) after all processing. Ideally, this should be -96 dB when you&apos;re not talking. In reality, a sound studio should see -60 dB, and you should hopefully see somewhere around -20 dB. When you are talking, this should rise to somewhere between -5 and -10 dB.&lt;br /&gt;If you are using echo cancellation, and this rises to more than -15 dB when you&apos;re not talking, your setup is not working, and you&apos;ll annoy other users with echoes.</source>
        <translation>Dette viser den maksimale kraft i den forrige frame (20 ms) efter al behandling. Ideelt set skulle dette være -96 dB, når du ikke snakker. I realiteten vil dette være -60 dB i et lydstudie, og du skulle gerne se noget omkring -20 dB. Når du snakker, burde dette stige til et sted mellem -5 og -10 dB.&lt;br /&gt;Hvis du bruger ekkoeliminering, og dette stiger til mere end -15 dB, når du ikke snakker, virker din opsætning ikke, og du vil genere andre brugere med ekko.</translation>
    </message>
    <message>
        <location/>
        <source>Signal Analysis</source>
        <translation>Signal analyse</translation>
    </message>
    <message>
        <location/>
        <source>Microphone power</source>
        <translation>Mikrofonstyrke</translation>
    </message>
    <message>
        <location/>
        <source>How close the current input level is to ideal</source>
        <translation>Hvor tæt det nuværende indspilnings-niveau er på det ideelle</translation>
    </message>
    <message>
        <location/>
        <source>This shows how close your current input volume is to the ideal. To adjust your microphone level, open whatever program you use to adjust the recording volume, and look at the value here while talking.&lt;br /&gt;&lt;b&gt;Talk loud, as you would when you&apos;re upset over getting fragged by a noob.&lt;/b&gt;&lt;br /&gt;Adjust the volume until this value is close to 100%, but make sure it doesn&apos;t go above. If it does go above, you are likely to get clipping in parts of your speech, which will degrade sound quality.</source>
        <translation>Dette viser hvor tæt din nuværende indspilningslydstyrke er på det ideelle. For at justere dit mikrofinniveau skal du åbne dét program, du bruger til at justere din optagelydstyrke, og kigge på værdierne hér, mens du snakker.&lt;br /&gt;&lt;b&gt;Snak højt, som om du oprevet over at blive nakket af en noob.&lt;/b&gt;&lt;br /&gt;Justér lydstyrken indtil denne værdi er tæt på 100%, men vær sikker på den ikke kommer over. Hvis den kommer, vil din stemme sansynligvis &quot;falde ud&quot;, når du snakker, hvilket vil forringe lydkvaliteten.</translation>
    </message>
    <message>
        <location/>
        <source>Signal-To-Noise ratio</source>
        <translation>Signal-til-støj forhold</translation>
    </message>
    <message>
        <location/>
        <source>Signal-To-Noise ratio from the microphone</source>
        <translation>Signal-til-støj forhold fra mikrofonen</translation>
    </message>
    <message>
        <location/>
        <source>This is the Signal-To-Noise Ratio (SNR) of the microphone in the last frame (20 ms). It shows how much clearer the voice is compared to the noise.&lt;br /&gt;If this value is below 1.0, there&apos;s more noise than voice in the signal, and so quality is reduced.&lt;br /&gt;There is no upper limit to this value, but don&apos;t expect to see much above 40-50 without a sound studio.</source>
        <translation>Dette er Signal-til-Støj forholdet (SNR) af mikrofonen i den forrige frame (20 ms). Det viser hvor meget tydeligere din stemme er i forhold til støjen.&lt;br /&gt;Hvis denne værdi er under 1.0, er der mere støj end stemme i signalet, og så er kvaliteten nedsat.&lt;br /&gt;Der er ingen øvre grænse for denne værdi, men forvent ikke at se noget over 40-50 uden at være i et lydstudie.</translation>
    </message>
    <message>
        <location/>
        <source>Speech Probability</source>
        <translation>Sandsynlighed for tale</translation>
    </message>
    <message>
        <location/>
        <source>Probability of speech</source>
        <translation>Sandsynlighed for tale</translation>
    </message>
    <message>
        <location/>
        <source>This is the probability that the last frame (20 ms) was speech and not environment noise.&lt;br /&gt;Voice activity transmission depends on this being right. The trick with this is that the middle of a sentence is always detected as speech; the problem is the pauses between words and the start of speech. It&apos;s hard to distinguish a sigh from a word starting with &apos;h&apos;.&lt;br /&gt;If this is in bold font, it means Mumble is currently transmitting (if you&apos;re connected).</source>
        <translation>Dette er sandsynligheden for, at den forrige frame (20 ms) var tale og ikke støj fra omgivelserne.&lt;br /&gt;Stemmeaktivitets-transmission afhænger af, at dette er rigtigt. Tricket ved dette er, at midten af en sætning altid bliver detekteret som tale; problemet er pauserne mellem ordene og starten af tale. Det er svært at skelne et suk fra et ord, der starter med &apos;h&apos;.&lt;br /&gt;Hvis dette vises med fed skrift, betyder det, at Mumble i øjeblikket transmittere (hvis du har oprettet forbindelse).</translation>
    </message>
    <message>
        <location/>
        <source>Configuration feedback</source>
        <translation>Konfiguration af feedback</translation>
    </message>
    <message>
        <location/>
        <source>Current audio bitrate</source>
        <translation>Nuværende lydbitrate</translation>
    </message>
    <message>
        <location/>
        <source>Bitrate of last frame</source>
        <translation>Bitrate for sidste frame</translation>
    </message>
    <message>
        <location/>
        <source>DoublePush interval</source>
        <translation>Dobbelttryk interval</translation>
    </message>
    <message>
        <location/>
        <source>Time between last two Push-To-Talk presses</source>
        <translation>Tid mellem to Tryk-for-snak tryk</translation>
    </message>
    <message>
        <location/>
        <source>Speech Detection</source>
        <translation>Stemmeaktivering</translation>
    </message>
    <message>
        <location/>
        <source>Current speech detection chance</source>
        <translation>Nuværende stemmegenkendelses-sansynlighed</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This shows the current speech detection settings.&lt;/b&gt;&lt;br /&gt;You can change the settings from the Settings dialog or from the Audio Wizard.</source>
        <translation>&lt;b&gt;Dette viser de nuværende stemmeaktiverings-indstillinger.&lt;/b&gt;&lt;br /&gt;Du kan skifte indstillingerne i &lt;i&gt;Indstillinger&lt;/i&gt;-dialogboksen eller  i lydguiden.</translation>
    </message>
    <message>
        <location/>
        <source>Signal and noise power spectrum</source>
        <translation>Signal og støj kraftspektrum</translation>
    </message>
    <message>
        <location/>
        <source>Power spectrum of input signal and noise estimate</source>
        <translation>Kraftspektrum for indspilningssignal og støjvurdering</translation>
    </message>
    <message>
        <location/>
        <source>This shows the power spectrum of the current input signal (red line) and the current noise estimate (filled blue).&lt;br /&gt;All amplitudes are multiplied by 30 to show the interesting parts (how much more signal than noise is present in each waveband).&lt;br /&gt;This is probably only of interest if you&apos;re trying to fine-tune noise conditions on your microphone. Under good conditions, there should be just a tiny flutter of blue at the bottom. If the blue is more than halfway up on the graph, you have a seriously noisy environment.</source>
        <translation>Dette viser kraftspektrummet af det nuværende indgående signal (rød linje) and den nuværende støjeliminering (udfyldt blå).&lt;br /&gt;Alle forstærkninger er ganget med 30 for at vise den interessante del (hvor meget mere signal end støj der er til stede i hvert waveband).&lt;br /&gt;Dette er sansynligvis kun interessant, hvis du prøver at finindstille støjforholdende for din mikrofon. Under gode forhold burde der kun være en lillebitte antydning af blå ved bunden. Hvis det blå er mere end halvejs oppe ad grafen, er du i et seriøst støjende miljø.</translation>
    </message>
    <message>
        <location/>
        <source>Echo Analysis</source>
        <translation>Ekkoanalyse</translation>
    </message>
    <message>
        <location/>
        <source>Weights of the echo canceller</source>
        <translation>Vægt af ekkoeliminering</translation>
    </message>
    <message>
        <location/>
        <source>This shows the weights of the echo canceller, with time increasing downwards and frequency increasing to the right.&lt;br /&gt;Ideally, this should be black, indicating no echo exists at all. More commonly, you&apos;ll have one or more horizontal stripes of bluish color representing time delayed echo. You should be able to see the weights updated in real time.&lt;br /&gt;Please note that as long as you have nothing to echo off, you won&apos;t see much useful data here. Play some music and things should stabilize. &lt;br /&gt;You can choose to view the real or imaginary parts of the frequency-domain weights, or alternately the computed modulus and phase. The most useful of these will likely be modulus, which is the amplitude of the echo, and shows you how much of the outgoing signal is being removed at that time step. The other viewing modes are mostly useful to people who want to tune the echo cancellation algorithms.&lt;br /&gt;Please note: If the entire image fluctuates massively while in modulus mode, the echo canceller fails to find any correlation whatsoever between the two input sources (speakers and microphone). Either you have a very long delay on the echo, or one of the input sources is configured wrong.</source>
        <translation>Dette viser vægten af ekkoelimineringen, hvor tiden forøges nedad og svingningstal forøges mod højre.&lt;br /&gt;Ideelt set skulle dette være sort, hvilket indikere at der overhovedet ikke er noget ekko. Du skulle være i stand til at se vægten blive opdateret i real time.&lt;br /&gt;Læg venligst mærke til at så længe du ikke har noget, der kan være ekko, vil du ikke se ret meget brugtbar data hér. Afspil noget musik og tingene skulle gerne stabilisere sig.&lt;br /&gt;Du kan vælge at se den rigtige eller indbildte dele af frekvens-område vægten, eller alternativt den beregnede absolutte værdi og fase. Den mest brugbare af disse, vil være den absolutte værdi, som er amplituden af ekkoet, og som viser dig hvor meget af det udgående signal, der bliver fjernet på dét tidstrin. De andre visningstilstande er mest brugbare for folk, der gerne vil tune ekkoeliminerings-algoritmerne.&lt;br /&gt;Bemærk: Hvis hele billedet svinger enormt ved absolut værdi tilstanden, vil det mislykkedes ekkoelimineringen at finde nogen sammenhæng overhovedet mellem de to indspilningskilder (højtalere og mikrofon). Enten har du en meget lang forsinkel på ekkoet, eller også er en af indspilningskilderne konfigureret forkert.</translation>
    </message>
    <message>
        <location/>
        <source>This is the audio bitrate of the last compressed frame (20 ms), and as such will jump up and down as the VBR adjusts the quality. The peak bitrate can be adjusted in the Settings dialog.</source>
        <translation>Dette er lyd-bitrate&apos;en for den seneste komprimerede frame (20 ms) og vil som sådan hoppe op og ned samtidig med, at VBR justerer kvaliteten. Den maksimale bitrate kan blive justeret i dialogboksen &quot;Indstillinger&quot;.</translation>
    </message>
</context>
<context>
    <name>AudioWizard</name>
    <message>
        <location filename="AudioWizard.ui"/>
        <source>Audio Tuning Wizard</source>
        <translation>Lydjusteringsguide</translation>
    </message>
    <message>
        <location/>
        <source>Introduction</source>
        <translation>Introduktion</translation>
    </message>
    <message>
        <location/>
        <source>Welcome to the Mumble Audio Wizard</source>
        <translation>Velkommen til Mumble lydguide</translation>
    </message>
    <message>
        <location/>
        <source>Finished</source>
        <translation>Færdig</translation>
    </message>
    <message>
        <location/>
        <source>Enjoy using Mumble</source>
        <translation>Nyd at bruge Mumble</translation>
    </message>
    <message>
        <location/>
        <source>Device selection</source>
        <translation>Enhedsvalg</translation>
    </message>
    <message>
        <location/>
        <source>Selecting the input and output device to use with Mumble.</source>
        <translation>Vælg indspilnings- og afspilningsenheden der skal bruges med Mumble.</translation>
    </message>
    <message>
        <location/>
        <source>This is the device your microphone is connected to.</source>
        <translation>Dette er enheden din mikrofon er forbundet til.</translation>
    </message>
    <message>
        <location/>
        <source>System</source>
        <translation>System</translation>
    </message>
    <message>
        <location/>
        <source>Input method for audio</source>
        <translation>Indspilningsmetode for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the input method to use for audio.&lt;/b&gt;&lt;br /&gt;Most likely you want to use DirectSound.</source>
        <translation>&lt;b&gt;Indspilningsmetoden der skal bruges for lyd.&lt;/b&gt;&lt;br /&gt;Du skal højest sansynligt bruge DirectSound.</translation>
    </message>
    <message>
        <location/>
        <source>Device</source>
        <translation>Enhed</translation>
    </message>
    <message>
        <location/>
        <source>Input device to use</source>
        <translation>Indspilningsenhed</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Selects which sound card to use for audio input.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Vælger hvilket lydkort der skal bruges for lydindspilning.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Cancel echo from headset or speakers</source>
        <translation>Eliminér ekko fra headset eller højtalere</translation>
    </message>
    <message>
        <location/>
        <source>Use echo cancellation</source>
        <translation>Brug ekkoeliminering</translation>
    </message>
    <message>
        <location/>
        <source>This enables echo cancellation of outgoing audio, which helps both on speakers and on headsets.</source>
        <translation>Dette aktiverer ekkoeliminering for udgående lyd, hvilket både hjælper for højtalere og headsets.</translation>
    </message>
    <message>
        <location/>
        <source>This is the device your speakers or headphones are connected to.</source>
        <translation>Dette er enheden dine højtalere eller dit headset er forbundet til.</translation>
    </message>
    <message>
        <location/>
        <source>Output method for audio</source>
        <translation>Afspilningsmetode for lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the Output method to use for audio.&lt;/b&gt;&lt;br /&gt;Most likely you want to use DirectSound.</source>
        <translation>&lt;b&gt;Dette er afspilningsmetoden der skal bruges for lyd&lt;/b&gt;&lt;br /&gt;Du skal højest sansynligt bruge DirectSound.</translation>
    </message>
    <message>
        <location/>
        <source>Output device to use</source>
        <translation>Afspilningsenhed</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Selects which sound card to use for audio Output.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Vælg hvilket lydkort der skal bruges til lydafspilnings.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Enable positional audio</source>
        <translation>Aktivér placeringsbestemt lyd</translation>
    </message>
    <message>
        <location/>
        <source>Allows positioning of sound</source>
        <oldsource>Allows positioning of sound.</oldsource>
        <translation>Tillad placering af lyd</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
This is the audio tuning wizard for Mumble. This will help you correctly set the input levels of your sound card, and also set the correct parameters for sound processing in Mumble.
&lt;/p&gt;
&lt;p&gt;
Please be aware that as long as this wizard is active, audio will be looped locally to allow you to listen to it, and no audio will be sent to the server.
&lt;/p&gt;</source>
        <translation>&lt;p&gt;
Dette er lydindstillings-guiden for Mumble. Dette vil hjælpe dig med at indstille indspilningsniveauerne for dit lydkort korrekt, og også indstille de korrekte parametre for lydbehandling i Mumble.
&lt;/p&gt;
&lt;p&gt;
Vær opmærksom på at så længe denne guide er aktiv, vil lyden blive gentaget lokalt for at gøre dig i stand til at lytte til det, og ingen lyd vil blive sendt til serveren.
&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Input Device</source>
        <translation>Indspilningsenhed</translation>
    </message>
    <message>
        <location/>
        <source>Output Device</source>
        <translation>Afspilningsenhed</translation>
    </message>
    <message>
        <location/>
        <source>This allows Mumble to use positional audio to place voices.</source>
        <translation>Dette tillader Mumble at bruge placeringsbestemt lyd til at placere stemmer.</translation>
    </message>
    <message>
        <location/>
        <source>Enables attenuation of other applications while users talk to you</source>
        <translation>Aktiverer dæmpning af andre programmer når brugere snakker til dig</translation>
    </message>
    <message>
        <location/>
        <source>Attenuate applications while other users talk</source>
        <translation>Dæmp programmer når andre brugere snakker</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
To keep latency to an absolute minimum, it&apos;s important to buffer as little audio as possible on the soundcard. However, many soundcards report that they require a much smaller buffer than what they can actually work with, so the only way to set this value is to try and fail.
&lt;/p&gt;
&lt;p&gt;
You should hear a voice sample. Change the slider below to the lowest value which gives &lt;b&gt;no&lt;/b&gt; interruptions or jitter in the sound. Please note that local echo is disabled during this test.
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;
For at opnå minimal forsinkelse, er det vigtigt at buffer så lidt lyd på lydkortet som muligt. Mange lydkort opgives imidlertid til at kunne bruge en meget mindre buffer, end hvad de rent faktisk kan arbejde ved, så den eneste måde at indstille denne værdi er ved at prøve sig frem.
&lt;/p&gt;
&lt;p&gt;
Du skulle hér høre et stemme-eksempel. Flyt skyderen neden for til den laveste værdi, som &lt;b&gt;ikke giver&lt;/b&gt; nogen som helst afbrydelser eller flimmer i lyden. Vær opmærksom på at lokalt ekko er deaktiveret under denne test.
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>Amount of data to buffer</source>
        <translation>Mængde af data der skal buffers</translation>
    </message>
    <message>
        <location/>
        <source>This sets the amount of data to pre-buffer in the output buffer. Experiment with different values and set it to the lowest which doesn&apos;t cause rapid jitter in the sound.</source>
        <translation>Dette indstiller mængden af data der skal forud-buffers i afspilnings-bufferen. Eksperimentér med forskellige værdier og sæt den til den laveste, der ikke giver flimmer i lyden.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there&apos;s an option to enable a &quot;Microphone boost&quot; make sure it&apos;s checked.
&lt;/p&gt;
&lt;p&gt;
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the blue and green but &lt;b&gt;not&lt;/b&gt; the red zone while you speak.
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;
Åben dit lydkontrolpanel og gå ind under indstillingerne for optagelse. Vær sikker på at mikrofonen er valgt som det aktive input og med maksimal optagelydstyrke. Hvis der er mulighed for at aktivere &quot;Mikrofon boost&quot;, så vær sikker på at den er markeret.
&lt;/p&gt;
&lt;p&gt;
Tal højlydt som når du er irriteret og ophidset. Formindsk nu lydstyrken i lydkontrolpanelet indtil baren nedenunder forbliver som højt som muligt i det blå og grønne, men &lt;b&gt;ikke&lt;/b&gt; i det røde område når du snakker.
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>Quality &amp; Notifications</source>
        <translation>Kvalitet &amp; notifikationer</translation>
    </message>
    <message>
        <location/>
        <source>Adjust quality and notification settings.</source>
        <translation>Justér kvalitet og notifikationsindstillinger.</translation>
    </message>
    <message>
        <location/>
        <source>Quality settings</source>
        <translation>Kvalitetsindstillinger</translation>
    </message>
    <message>
        <location/>
        <source>Low</source>
        <translation>Lav</translation>
    </message>
    <message>
        <location/>
        <source>Balanced</source>
        <translation>Balanceret</translation>
    </message>
    <message>
        <location/>
        <source>High</source>
        <translation>Høj</translation>
    </message>
    <message>
        <location/>
        <source>Custom</source>
        <translation>Brugerdefineret</translation>
    </message>
    <message>
        <location/>
        <source>You already set a customized quality configuration in Mumble. Select this setting to keep it.</source>
        <translation>Du har allerede indstillet en brugerdefineret opsætning af kvalitet i Mumble. Vælg denne indstilling for at beholde den.</translation>
    </message>
    <message>
        <location/>
        <source>Notification settings</source>
        <translation>Notifikationsindstillinger</translation>
    </message>
    <message>
        <location/>
        <source>Use Text-To-Speech to read notifications and messages to you.</source>
        <translation>Brug Tekst-til-tale til at læse notifikationer og beskeder for dig.</translation>
    </message>
    <message>
        <location/>
        <source>Disable Text-To-Speech and use sounds instead.</source>
        <translation>Deaktivér Tekst-til-tale og brug lyde i stedet.</translation>
    </message>
    <message>
        <location/>
        <source>Positional Audio</source>
        <translation>Placeringsbestemt lyd</translation>
    </message>
    <message>
        <location/>
        <source>Adjusting attenuation of positional audio.</source>
        <translation>Justér reducering af placeringsbestemt lyd.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
Mumble supports positional audio for some games, and will position the voice of other users relative to their position in game. Depending on their position, the volume of the voice will be changed between the speakers to simulate the direction and distance the other user is at. Such positioning depends on your speaker configuration being correct in your operating system, so a test is done here.
&lt;/p&gt;
&lt;p&gt;
The graph below shows the position of &lt;font color=&quot;red&quot;&gt;you&lt;/font&gt;, the &lt;font color=&quot;yellow&quot;&gt;speakers&lt;/font&gt; and a &lt;font color=&quot;green&quot;&gt;moving sound source&lt;/font&gt; as if seen from above. You should hear the audio move between the channels.
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;Mumble understøtter placeringsbestemt lyd i nogle spil, og dette vil placere andre brugeres stemme i forhold til deres placering i spillet. Afhængig af deres placering vil lydstyrken af deres stemme blive ændret mellem højtalerne, for at simulere retningen og afstanden til brugerne. Denne slags placering afhænger af at din højtalerkonfiguration er korrekt i dit operativsystem, så derfor bliver der hér udført en test.
&lt;/p&gt;
&lt;p&gt;
Grafen nedenunder viser placeringen af &lt;font color=&quot;red&quot;&gt;dig&lt;/font&gt;, &lt;font color=&quot;yellow&quot;&gt;højtalere&lt;/font&gt; og en &lt;font color=&quot;green&quot;&gt;bevægende lydkilde&lt;/font&gt;, som hvis det er set fra oven. Du skulle gerne kunne høre lyden bevæge sig mellem kanalerne.
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>Use headphones instead of speakers</source>
        <translation>Brug headset i stedet for højtalere</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
Congratulations. You should now be ready to enjoy a richer sound experience with Mumble.
&lt;/p&gt;
&lt;p&gt;
Mumble is under continuous development, and the development team wants to focus on the features that benefit the most users. To this end, Mumble supports submitting anonymous statistics about your configuration to the developers. These statistics are essential for future development, and also make sure the features you use aren&apos;t deprecated.
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;
Tillykke. Du skulle nu være klar til at nyde bedre lydoplevelse med Mumble.
&lt;/p&gt;
&lt;p&gt;
Mumble er under konstant udvikling, og udviklerteamet vil gerne fokusere på funktioner, der er til gavn for flest brugere. Til at hjælpe med dette formål understøtter Mumble mulighed for at indsende anonymse statistikker om din konfiguration til udviklerne. Disse statistikker er en væsentlig forudsætning for fremtidig udvikling, og sikrer også at funktionerne du bruger ikke mangler.
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>Use headphones</source>
        <translation>Bruge headset</translation>
    </message>
    <message>
        <location/>
        <source>This ignores the OS speaker configuration and configures the positioning for headphones instead.</source>
        <translation>Dette ignorerer operativsystem-højtalerkonfigurationen og konfigurerer placeringen af headset i stedet.</translation>
    </message>
    <message>
        <location/>
        <source>Volume tuning</source>
        <translation>Lydstyrkejustering</translation>
    </message>
    <message>
        <location/>
        <source>Tuning microphone hardware volume to optimal settings.</source>
        <translation>Justér hardware-lydstyrken for mikrofonen til de optimale indstillinger.</translation>
    </message>
    <message>
        <location/>
        <source>Now talk softly, as you would when talking late at night and you don&apos;t want to disturb anyone. Adjust the slider below so that the bar moves into green when you talk, but stays blue while you&apos;re silent.</source>
        <translation>Tal nu dæmpet som du ville gøre sent om natten, hvor du ikke vil forstyrre nogen. Justér skyderen nedenunder, så baren bevæger sig ind i det grønne område, når du snakker, men forbliver i det blå område når du er stille.</translation>
    </message>
    <message>
        <location/>
        <source>Voice Activity Detection</source>
        <translation>Stemmeaktivering</translation>
    </message>
    <message>
        <location/>
        <source>Letting Mumble figure out when you&apos;re talking and when you&apos;re silent.</source>
        <translation>Lader Mumble finde ud af hvornår du taler, og hvornår du er stille.</translation>
    </message>
    <message>
        <location/>
        <source>This will help Mumble figure out when you are talking. The first step is selecting which data value to use.</source>
        <translation>Dette hjælper Mumble med at finde ud af hvornår du snakker. Det første du skal gøre er at vælge hvilke dataværdier der skal bruges.</translation>
    </message>
    <message>
        <location/>
        <source>Raw amplitude from input</source>
        <translation>Rå styrke af input</translation>
    </message>
    <message>
        <location/>
        <source>Signal-To-Noise ratio</source>
        <translation>Signal-til-støj forhold</translation>
    </message>
    <message>
        <location/>
        <source>Next you need to adjust the following slider. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you&apos;re not talking, everything should be in the red (definitively not speech).</source>
        <oldsource>Next you need to adjust the following two sliders. The first few utterances you say should end up in the green area (definitive speech). While talking, you should stay inside the yellow (might be speech) and when you&apos;re not talking, everything should be in the red (definitively not speech).</oldsource>
        <translation>Dernæst skal du justere følgende skyder. De første få udtalelser, du siger, burde ende i det grønne område (definitivt tale). Når du snakker, burde du forblive inden for det gule (kan være tale), og når du ikke snakker, burde alt være i det røde (definitivt ikke tale).</translation>
    </message>
    <message>
        <location/>
        <source>Device tuning</source>
        <translation>Enhedsjustering</translation>
    </message>
    <message>
        <location/>
        <source>Changing hardware output delays to their minimum value.</source>
        <translation>Indstil hardware-afspilningsforsinkelse til den mindst mulige værdi.</translation>
    </message>
    <message>
        <location/>
        <source>Submit anonymous statistics to the Mumble project</source>
        <translation>Indsend anonyme statistikker til Mumble-projektet</translation>
    </message>
    <message>
        <location/>
        <source>Push To Talk:</source>
        <translation>Tryk-for-snak:</translation>
    </message>
    <message>
        <location filename="AudioWizard.cpp" line="+309"/>
        <source>%1 ms</source>
        <translation>%1 ms</translation>
    </message>
    <message>
        <location filename="AudioWizard.ui"/>
        <source>Enables attenuation of other applications while users talk to you. This means that as soon someone starts to speak to you in Mumble, the sound of all other applications (like audio players) will get attenuated so you can hear them more clearly.</source>
        <translation>Aktiverer dæmpning af andre programmer mens brugere snakker til dig. Det betyder at så snart nogen begynder at snakke til dig i Mumble, vil lyden af alle andre programmer (så som musikafspillere) blive dæmpet så du kan høre dem bedre.</translation>
    </message>
    <message>
        <location/>
        <source>Apply some high contrast optimizations for visually impaired users</source>
        <translation>Anvend nogle høje kontrast optimeringer for brugere med nedsat syn</translation>
    </message>
    <message>
        <location/>
        <source>Use high contrast graphics</source>
        <translation>Brug grafik med høj kontrast</translation>
    </message>
    <message>
        <location/>
        <source>Keep custom Text-To-Speech settings.</source>
        <translation>Behold brugerdefineret Tekst-til-tale indstillinger.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there&apos;s an option to enable a &quot;Microphone boost&quot; make sure it&apos;s checked.
&lt;/p&gt;
&lt;p&gt;
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but &lt;b&gt;not&lt;/b&gt; the crisscrossed zone while you speak.
&lt;/p&gt;
</source>
        <oldsource>&lt;p&gt;
Open your sound control panel and go to the recording settings. Make sure the microphone is selected as active input with maximum recording volume. If there&apos;s an option to enable a &quot;Microphone boost&quot; make sure it&apos;s checked.
&lt;/p&gt;
&lt;p&gt;
Speak loudly, as when you are annoyed or excited. Decrease the volume in the sound control panel until the bar below stays as high as possible in the striped and the empty but &lt;b&gt;not&lt;/b&gt; the criss-crossed zone while you speak.
&lt;/p&gt;
</oldsource>
        <comment>For high contrast mode</comment>
        <translation>&lt;p&gt;
Åben dit lydkontrolpanel og gå ind under indstillingerne for optagelse. Vær sikker på at mikrofonen er valgt som det aktive input og med maksimal optagelydstyrke. Hvis der er mulighed for at aktivere &quot;Mikrofon boost&quot;, så vær sikker på at den er slået til.
&lt;/p&gt;
&lt;p&gt;
Tal højlydt som når du er irriteret og ophidset. Formindsk nu lydstyrken i lydkontrolpanelet indtil baren nedenunder forbliver så højt som muligt i det blå og grønne, men &lt;b&gt;ikke&lt;/b&gt; i det ternede område når du snakker.
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>Now talk softly, as you would when talking late at night and you don&apos;t want to disturb anyone. Adjust the slider below so that the bar moves into empty zone when you talk, but stays in the striped one while you&apos;re silent.</source>
        <comment>For high contrast mode</comment>
        <translation>Tal nu dæmpet som du ville gøre sent om natten, hvor du ikke vil forstyrre nogen. Justér skyderen nedenunder, så baren bevæger sig ind i det tomme område, når du snakker, men forbliver i det stribede område, når du er stille.</translation>
    </message>
    <message>
        <location/>
        <source>Next you need to adjust the following slider. The first few utterances you say should end up in the empty area (definitive speech). While talking, you should stay inside the striped (might be speech) and when you&apos;re not talking, everything should be in the crisscrossed (definitively not speech).</source>
        <comment>For high contrast mode</comment>
        <translation>Dernæst skal du justere følgende skyder. De første få udtalelser, du siger, burde ende i det tomme område (definitivt tale). Når du snakker, burde du forblive inden for det stribede (kan være tale), og når du ikke snakker, burde alt være i det ternede (definitivt ikke tale).</translation>
    </message>
    <message>
        <location/>
        <source>In this configuration Mumble will use a &lt;b&gt;low amount of bandwidth&lt;/b&gt;. This will inevitably result in high latency and poor quality. Choose this only if your connection cannot handle the other settings. (16kbit/s, 60ms per packet)</source>
        <translation>Med denne konfiguration bruger Mumble en &lt;b&gt;lav mængde båndbredde&lt;/b&gt;. Dette vil uundgåeligt resultere i høj forsinkelse og dårlig kvalitet. Vælg kun dette, hvis din forbindelse ikke kan håndtere de andre indstillinger. (16kbit/s, 60ms per pakke)</translation>
    </message>
    <message>
        <location/>
        <source>This is the &lt;b&gt;recommended default&lt;/b&gt; configuration. It provides a good balance between quality, latency, and bandwidth usage. (40kbit/s, 20ms per packet)</source>
        <translation>Dette er den &lt;b&gt;anbefalede standard&lt;/b&gt;-konfiguration. Denne giver en god balance mellem kvalitet, forsinkelse og båndbredde-forbrug. (40kbit/s, 20ms per pakke)</translation>
    </message>
    <message>
        <location/>
        <source>This configuration is only recommended for use in setups where bandwidth is not an issue, like a LAN. It provides the lowest latency supported by Mumble and &lt;b&gt;high quality&lt;/b&gt;. (72kbit/s, 10ms per packet)</source>
        <translation>Det anbefales kun at bruge denne konfiguration i opsætninger, hvor båndbredde ikke er noget problem, fx til LAN. Denne giver den mindst mulige forsinkelse, som Mumble understøtter, og &lt;b&gt;høj kvalitet&lt;/b&gt;. (72kbit/s, 10ms per pakke)</translation>
    </message>
</context>
<context>
    <name>BanEditor</name>
    <message>
        <location filename="BanEditor.ui"/>
        <source>Mumble - Edit Bans</source>
        <translation>Mumble - Redigér bandlysninger</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Address</source>
        <translation>&amp;Adresse</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Mask</source>
        <translation>&amp;Maske</translation>
    </message>
    <message>
        <location/>
        <source>Reason</source>
        <translation>Begrundelse</translation>
    </message>
    <message>
        <location/>
        <source>Start</source>
        <translation>Start</translation>
    </message>
    <message>
        <location/>
        <source>End</source>
        <translation>Slut</translation>
    </message>
    <message>
        <location/>
        <source>User</source>
        <translation>Bruger</translation>
    </message>
    <message>
        <location/>
        <source>Hash</source>
        <translation>Hash</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Add</source>
        <translation>&amp;Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Update</source>
        <translation>&amp;Opdatér</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove</source>
        <translation>&amp;Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Ban List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Search field</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>This is the search field. Use it to find bans that have this username set in the username field.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Who are you looking for?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>No nickname</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>IP address</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>No IP address</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Reason for the ban</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>No reason</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Ban end date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Ban end date. If you set the same date for start and end, the ban will be permanent (it will not expire).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Certificate hash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>No certificate hash</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Banned users</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>This is a list with banned users.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Use this button if you want to add a new ban.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Use this button if you want to update ban information.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Use this button if you want to remove user from the ban list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Clear all fields</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>This button clears all fields. Use it if you want to add a new ban.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Clear</source>
        <translation type="unfinished">Ryd</translation>
    </message>
    <message numerus="yes">
        <location filename="BanEditor.cpp" line="+201"/>
        <source>Ban List - %n Ban(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
</context>
<context>
    <name>CertView</name>
    <message>
        <location filename="Cert.cpp" line="+53"/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Email</source>
        <translation>Email</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Issuer</source>
        <translation>Udsteder</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Expiry Date</source>
        <translation>Udløbsdato</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>(none)</source>
        <translation>(ingen)</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Self-signed</source>
        <translation>Selv-signeret</translation>
    </message>
</context>
<context>
    <name>CertWizard</name>
    <message>
        <location line="+90"/>
        <source>Resolving domain %1.</source>
        <translation>Afprøver domænet %1.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Unable to validate email.&lt;br /&gt;Enter a valid (or blank) email to continue.</source>
        <translation>Ikke i stand til at validere emailen.&lt;br /&gt;Skriv en gyldig (eller tom) email for at fortsætte.</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>There was an error generating your certificate.&lt;br /&gt;Please try again.</source>
        <translation>There opstod en fejl under genereringen af dit certifikat&lt;br /&gt;Prøv venligst igen.</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Your certificate and key could not be exported to PKCS#12 format. There might be an error in your certificate.</source>
        <translation>Dit certifikat og nøgle kunne ikke blive eksporteres til  PKCS#12-format. Der kan være en fejl i dit certifikat.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>The file could not be opened for writing. Please use another file.</source>
        <translation>Denne fil kunne ikke åbnes for skrivning. Brug venligst en anden fil.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>The file could not be written successfully. Please use another file.</source>
        <translation>Denne fil kunne der ikke skrives  succesfuldt til. Brug venligst en anden fil.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>The file could not be opened for reading. Please use another file.</source>
        <translation>Denne fil kunne ikke åbnes for læsning. Brug venligst en anden fil.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>The file is empty or could not be read. Please use another file.</source>
        <translation>Denne fil er tom eller kunne ikke læses. Brug venligst en anden fil.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>The file did not contain a valid certificate and key. Please use another file.</source>
        <translation>Filen indeholdt ikke et gyldigt certifikat og nøgle. Brug venligst en anden fil.</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Select file to export certificate to</source>
        <translation>Vælg filen certifikatet skal eksporteres til</translation>
    </message>
    <message>
        <location line="+37"/>
        <source>Select file to import certificate from</source>
        <translation>Vælg filen der skal importeres certifikat fra</translation>
    </message>
    <message>
        <location line="+57"/>
        <source>Unable to resolve domain.</source>
        <translation>Ude af stand til at afprøve domænet.</translation>
    </message>
    <message>
        <location line="+43"/>
        <source>Mumble User</source>
        <translation>Mumble bruger</translation>
    </message>
    <message>
        <location filename="main.cpp" line="+500"/>
        <source>&lt;b&gt;Certificate Expiry:&lt;/b&gt; Your certificate is about to expire. You need to renew it, or you will no longer be able to connect to servers you are registered on.</source>
        <translation>&lt;b&gt;Certifikat Udløb:&lt;/b&gt; Dit certifikat er ved at udløbe. Du skal fornye det, ellers vil du ikke længere være i stand til at forbinde til servere du registreret på.</translation>
    </message>
</context>
<context>
    <name>Certificates</name>
    <message>
        <location filename="Cert.ui"/>
        <source>Certificate Management</source>
        <translation>Certifikat administration</translation>
    </message>
    <message>
        <location/>
        <source>Certificate Authentication</source>
        <translation>Certifikat autentificering</translation>
    </message>
    <message>
        <location/>
        <source>Authenticating to servers without using passwords</source>
        <translation>Autentificér til servere uden at bruge adgangskoder</translation>
    </message>
    <message>
        <location/>
        <source>Current certificate</source>
        <translation>Nuværende certifikat</translation>
    </message>
    <message>
        <location/>
        <source>This is the certificate Mumble currently uses.</source>
        <translation>Dette er certifikatet Mumble i øjeblikket bruger.</translation>
    </message>
    <message>
        <location/>
        <source>Current Certificate</source>
        <translation>Nuværende certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Create a new certificate</source>
        <translation>Opret et nyt certifikat</translation>
    </message>
    <message>
        <location/>
        <source>This will create a new certificate.</source>
        <translation>Dette vil oprette et nyt certifikat.</translation>
    </message>
    <message>
        <location/>
        <source>Import certificate from file</source>
        <translation>Importér certifikat fra fil</translation>
    </message>
    <message>
        <location/>
        <source>This will import a certificate from file.</source>
        <translation>Dette vil importere et certifikat fra en fil.</translation>
    </message>
    <message>
        <location/>
        <source>Import a certificate</source>
        <translation>Importér et certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Export Certificate</source>
        <translation>Eksportér certifikat</translation>
    </message>
    <message>
        <location/>
        <source>This will export a certificate to file.</source>
        <translation>Dette vil eksportere et certifikat til en fil.</translation>
    </message>
    <message>
        <location/>
        <source>Export current certificate</source>
        <translation>Exportér nuværende certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Import Certificate</source>
        <translation>Importér certifikat</translation>
    </message>
    <message>
        <location/>
        <source>PKCS #12 Certificate import</source>
        <translation>PKCS #12 Certifikatimportering</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from Firefox, Internet Explorer, Opera etc.&lt;/p&gt;&lt;p&gt;If the file is password protected, you will need the password to import the certificate.&lt;/p&gt;</source>
        <oldsource>&lt;p&gt;Mumble can import certificates stored in PKCS #12 format. This is the format used when exporting a key from Mumble, and also when exporting keys from FireFox, Internet Explorer, Opera etc.&lt;/p&gt;&lt;p&gt;If the file is password protected, you will need the password to import the certificate.&lt;/p&gt;</oldsource>
        <translation>&lt;p&gt;Mumble kan importere certifikater gemt i PKCS #12-formatet. Dette er formatet der bliver brugt når man eksporterer en nøgle fra Mumble, og også når man eksportere nøgler fra Firefox, Internet Explorer, Opera osv.&lt;/p&gt;&lt;p&gt;Hvis filen er beskyttet af en adgangskode, skal du bruge adgangskoden for at importere certifikatet.&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Import from</source>
        <translation>Importér fra</translation>
    </message>
    <message>
        <location/>
        <source>Filename to import from</source>
        <translation>Filnavn der skal importeres fra</translation>
    </message>
    <message>
        <location/>
        <source>This is the filename you wish to import a certificate from.</source>
        <translation>Dette er filnavnet du ønsker at importere et certifikat fra.</translation>
    </message>
    <message>
        <location/>
        <source>Select file to import from</source>
        <translation>Vælg fil at importere fra</translation>
    </message>
    <message>
        <location/>
        <source>This opens a file selection dialog to choose a file to import a certificate from.</source>
        <translation>Dette åbner en filvalgs-dialogboks for at vælge en fil der skal importeres et certifikat fra.</translation>
    </message>
    <message>
        <location/>
        <source>Open...</source>
        <translation>Åben...</translation>
    </message>
    <message>
        <location/>
        <source>Password</source>
        <translation>Adgangskode</translation>
    </message>
    <message>
        <location/>
        <source>Password for PKCS#12 file</source>
        <translation>Adgangskode for PKCS#12 fil</translation>
    </message>
    <message>
        <location/>
        <source>This is the password for the PKCS#12 file containing your certificate.</source>
        <translation>Dette er adgangskoden for PKCS#12-filen der indeholder dit certifikat.</translation>
    </message>
    <message>
        <location/>
        <source>Certificate to import</source>
        <translation>Certifikat der skal importeres</translation>
    </message>
    <message>
        <location/>
        <source>This is the certificate you are importing.</source>
        <translation>Dette er certifikatet du importerer.</translation>
    </message>
    <message>
        <location/>
        <source>Certificate Details</source>
        <translation>Certifikatdetaljer</translation>
    </message>
    <message>
        <location/>
        <source>Replace Certificate</source>
        <translation>Erstat certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Replace existing certificate with new certificate?</source>
        <translation>Erstat eksisterende certifikat med nyt certifikat?</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;You already have a certificate stored in Mumble, and you are about to replace it.&lt;/p&gt;
&lt;p&gt;If you are upgrading to a certificate issued to you by a trusted CA and the email addresses match your current certificate, this is completely safe, and servers you connect to will automatically recognize the strong certificate for your email address.
&lt;/p&gt;
&lt;p&gt;If this is not the case, you will no longer be recognized by any server you previously have authenticated with. If you haven&apos;t been registered on any server yet, this is nothing to worry about.
&lt;/p&gt;
&lt;p&gt;
Are you sure you wish to replace your certificate?
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;Du har allerede gemt et certifikat i Mumble, og du er ved at erstatte det.&lt;/p&gt;
&lt;p&gt;Hvis du er ved at opgradere til et certifikat udstedt af en betroet CA og emailadressen matcher dit nuværende certifikat, er dette fuldt ud sikker, og servere, du forbinder til, vil automatisk genkende det stærke certifikat med din emailadresse.
&lt;/p&gt;
&lt;p&gt;Hvis ovenstående ikke er tilfældet, vil du ikke længere blive genkendt af nogen server, som du tidligere er blevet autentificeret på. Hvis du ikke er blevet registreret på nogen server endnu, skal du ikke bekymre dig.
&lt;/p&gt;
&lt;p&gt;
Er du sikker på du vil erstatte dit certifikat?
&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>This is the certificate Mumble currently uses. It will be replaced.</source>
        <translation>Dette er certifikatet Mumble i øjeblikket bruger. Det vil blive erstattet.</translation>
    </message>
    <message>
        <location/>
        <source>New certificate</source>
        <translation>Nyt certifikat</translation>
    </message>
    <message>
        <location/>
        <source>This is the new certificate that will replace the old one.</source>
        <translation>Dette er det nye certifikat som vil erstatte det gamle.</translation>
    </message>
    <message>
        <location/>
        <source>New Certificate</source>
        <translation>Nyt certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Make a backup of your certificate</source>
        <translation>Lav en backup af dit certifikat</translation>
    </message>
    <message>
        <location/>
        <source>Export to</source>
        <translation>Eksportér til</translation>
    </message>
    <message>
        <location/>
        <source>Filename to export to</source>
        <translation>Filnavn der skal eksporteres til</translation>
    </message>
    <message>
        <location/>
        <source>This is the filename you wish to export a certificate to.</source>
        <translation>Dette er filnavnet du ønsker at eksportere et certifikat til.</translation>
    </message>
    <message>
        <location/>
        <source>Save As...</source>
        <translation>Gem som...</translation>
    </message>
    <message>
        <location/>
        <source>This is the certificate Mumble currently uses. It will be exported.</source>
        <translation>Dette er certifikatet Mumble i øjeblikket bruger. Det vil blive eksporteret.</translation>
    </message>
    <message>
        <location/>
        <source>Generate a new certificate for strong authentication</source>
        <translation>Generér et nyt certifikat til stærk autentificering</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;Mumble will now generate a strong certificate for authentication to servers.&lt;/p&gt;&lt;p&gt;If you wish, you may provide some additional information to be stored in the certificate, which will be presented to servers when you connect. If you provide a valid email address, you can upgrade to a CA issued email certificate later on, which provides strong identification.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Mumble vil nu generere et stærkt certifikat, der kan bruges til at autentificere med servere.&lt;/p&gt;&lt;p&gt;Hvis du ønsker, kan du tilføje yderligere information, som skal gemmes i certifikatet, hvilket vil blive sendt til servere, når du opretter forbindelse. Hvis du tilføjer en gyldig emailadresse, kan du opgradere til et CA-udstedt email-certifikat senere, som giver stærk identifikation.&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location/>
        <source>Email</source>
        <translation>Email</translation>
    </message>
    <message>
        <location/>
        <source>Your email address (e.g. johndoe@mumble.info)</source>
        <translation>Din emailadresse (fx  johndoe@mumble.info)</translation>
    </message>
    <message>
        <location/>
        <source>This is your email address. It is strongly recommended to provide a valid email address, as this will allow you to upgrade to a strong certificate without authentication problems.</source>
        <translation>Dette er din emailadresse. Det anbefales kraftigt at opgive en gyldig emailadresse, eftersom dette vil gøre dig i stand til at opgradere til et stærkt certifikat uden autenticiferingsproblemer.</translation>
    </message>
    <message>
        <location/>
        <source>Your name (e.g. John Doe)</source>
        <translation>Dit navn (fx John Doe)</translation>
    </message>
    <message>
        <location/>
        <source>This is your name, and will be filled out in the certificate. This field is entirely optional.</source>
        <translation>Dette er dit navn, og vil blive udfyldt i dit certifikat. Dette felt er fuldstændigt valgfrit.</translation>
    </message>
    <message>
        <location/>
        <source>Finish</source>
        <translation>Færdig</translation>
    </message>
    <message>
        <location/>
        <source>Certificate-based authentication is ready for use</source>
        <translation>Certifikat-baseret autentificering er klar til brug</translation>
    </message>
    <message>
        <location/>
        <source>Enjoy using Mumble with strong authentication.</source>
        <translation>Nyd at brug Mumble med stærk autentificering.</translation>
    </message>
    <message>
        <location/>
        <source>Automatic certificate creation</source>
        <translation>Automatisk oprettelse af certifikat</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;Mumble can use certificates to authenticate with servers. Using certificates avoids passwords, meaning you don&apos;t need to disclose any password to the remote site. It also enables very easy user registration.&lt;/p&gt;&lt;p&gt;While Mumble can work without certificates, the majority of servers will expect you to have one.&lt;/p&gt;
&lt;p&gt;
It is &lt;b&gt;strongly&lt;/b&gt; recommended that you &lt;a href=&quot;http://mumble.info/certificate.php&quot;&gt;create a trusted certificate&lt;/a&gt;.
&lt;/p&gt;
</source>
        <translation>&lt;p&gt;Mumble kan bruge certifikater til at autentificere dig med servere. Ved at bruge certifikater, undgår man adgangskoder, hvilket vil sige, at du derved ikke behøver afsløre nogen adgangskoder, som nemt kan komme i omløb. Med certifikater er der mulighed for meget nem brugerregistrering.&lt;/p&gt;&lt;p&gt;Mumble kan godt nok fungere uden certifikater, men størstedelen af alle servere forventer at du har et.&lt;/p&gt;
&lt;p&gt;
Det er &lt;b&gt;kraftigt&lt;/b&gt; anbefalet at du &lt;a href=&quot;http://mumble.info/certificate.php&quot;&gt;opretter et betroet certifikat&lt;/a&gt;.
&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;If you ever lose your current certificate, which will happen if your computer suffers a hardware failure or you reinstall your machine, you will no longer be able to authenticate to any server you are registered on. It is therefore &lt;b&gt;mandatory&lt;/b&gt; that you make a backup of your certificate. We strongly recommend you store this backup on removable storage, such as a USB flash drive.&lt;/p&gt;
&lt;p&gt;Note that this file will not be encrypted, and if anyone gains access to it, they will be able to impersonate you, so take good care of it.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Hvis du nogensinde mister dit nuværende certifikat, hvilket vil ske, hvis din computer udsættes for et hardware-nedbrud, eller hvis du geninstallerer dit system, vil du ikke længere være i stand til at autentificere på nogen server, som du er registreret på. Det er derfor &lt;b&gt;påkrævet&lt;/b&gt;, at du laver en backup af dit certifikat. Vi anbefaler dig kraftigt at gemme denne backup på et flytbart lager, fx en USB-nøgle.&lt;/p&gt;
&lt;p&gt;Vær opmærksom på at denne fil ikke vil blive krypteret, og hvis nogen får adgang til den, vil de være i stand til at udgive sig for at være dig, så pas godt på den.&lt;/p&gt;</translation>
    </message>
</context>
<context>
    <name>ChanACL</name>
    <message>
        <location filename="../ACL.cpp" line="+230"/>
        <source>None</source>
        <translation>Ingen</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Traverse</source>
        <translation>Gennemse</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Enter</source>
        <translation>Gå ind i</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Speak</source>
        <translation>Tal</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Mute/Deafen</source>
        <translation>Deaktivér mikrofon/lyd</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Make channel</source>
        <translation>Lav kanal</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Make temporary</source>
        <translation>Lav midlertidig</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Link channel</source>
        <translation>Sammenkæd kanal</translation>
    </message>
    <message>
        <location line="-87"/>
        <source>This represents no privileges.</source>
        <translation>Dette repræsenterer ingen privilegier.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This represents total access to the channel, including the ability to change group and ACL information. This privilege implies all other privileges.</source>
        <translation>Dette repræsenterer total adgang til kanalen, inklusiv muligheden for at ændre grupper og ACL-information. Dette privilegie indebærer alle andre privilegier.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This represents the permission to traverse the channel. If a user is denied this privilege, he will be unable to access this channel and any sub-channels in any way, regardless of other permissions in the sub-channels.</source>
        <translation>Dette repræsenterer rettigheden til at gennemse kanalen. Hvis en bruger er nægtet dette privilegie, vil brugeren ikke være i stand til at tilgå denne kanal og nogen underkanaler på nogen måde usanset andre rettigheder i underkanalerne.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>This represents the permission to join the channel. If you have a hierarchical channel structure, you might want to give everyone Traverse, but restrict Enter in the root of your hierarchy.</source>
        <translation>Dette repræsenterer rettigheden til at gå ind i kanalen. Hvis du har en hierarkisk-kanalstruktur, vil du måske have gavn af at give alle &lt;i&gt;Gennemse&lt;/i&gt;, men begrænse &lt;i&gt;Gå ind i&lt;/i&gt; for rod-kanalen i hierarkiet.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This represents the permission to speak in a channel. Users without this privilege will be suppressed by the server (seen as muted), and will be unable to speak until they are unmuted by someone with the appropriate privileges.</source>
        <translation>Dette repræsenterer rettigheden til at tale i en kanal. Serveren vil deaktivere mikrofonen for brugere uden dette privilegie, og de vil være ude af stand til at snakke, indtil nogen med de fornødne privilegier aktiverer deres mikrofon igen.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>This represents the permission to whisper to this channel from the outside. This works exactly like the &lt;i&gt;speak&lt;/i&gt; privilege, but applies to packets spoken with the Whisper key held down. This may be used to broadcast to a hierarchy of channels without linking.</source>
        <translation>Dette repræsenterer rettigheden til at hviske til denne kanal udefra. Dette virker præcis ligesom &lt;i&gt;Tal&lt;/i&gt;-privilegiet, men gælder for tale der bliver sendt ved hjælp af hviske-knappen. Dette kan bruges til at tale til et hierarki af kanaler uden at sammenkæde dem.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>This represents the permission to mute and deafen other users. Once muted, a user will stay muted until he is unmuted by another privileged user or reconnects to the server.</source>
        <translation>Dette repræsenterer rettigheden til at deaktivere andre brugeres lyd og mikrofon. Når en brugers mikrofon først er blevet deaktiveret, vil brugeren være ude af stand til at snakke, indtil nogen med de fornødne privilegier aktiverer brugerens mikrofon igen, eller hvis brugeren opretter forbindelse til serveren igen.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This represents the permission to move a user to another channel or kick him from the server. To actually move the user, either the moving user must have Move privileges in the destination channel, or the user must normally be allowed to enter the channel. Users with this privilege can move users into channels the target user normally wouldn&apos;t have permission to enter.</source>
        <translation>Dette repræsenterer rettigheden til at flytte en bruger til en anden kanal eller kicke brugeren fra serveren. For rent faktisk at flytte brugeren, skal brugeren der flytter den anden bruger have flyt-privilegiet i destinationskanalen, eller brugeren, der bliver flyttet, skal have rettigheder til at gå ind i destinationskanalen. Brugere med dette privilegium kan flytte brugere ind i kanaler, som brugeren, der bliver flyttet, normalt ikke har rettigheder til at gå ind i.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>This represents the permission to make sub-channels. The user making the sub-channel will be added to the admin group of the sub-channel.</source>
        <translation>Dette repræsenterer rettigheden til at lave underkanaler. Brugeren, der laver underkanaler, vil blive tilføjet til admin-gruppen i underkanalen.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This represents the permission to make a temporary subchannel. The user making the sub-channel will be added to the admin group of the sub-channel. Temporary channels are not stored and disappear when the last user leaves.</source>
        <translation>Dette repræsenterer rettigheden til at lave en midlertidig underkanal. Brugeren, der laver underkanaler, vil blive tilføjet til admin-gruppen i underkanalen. Midlertidige kanaler er ikke gemt og forsvinder, når den sidste bruger forlader kanelen.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>This represents the permission to link channels. Users in linked channels hear each other, as long as the speaking user has the &lt;i&gt;speak&lt;/i&gt; privilege in the channel of the listener. You need the link privilege in both channels to create a link, but just in either channel to remove it.</source>
        <translation>Dette repræsenterer rettigheden til at sammenkæde kanaler. Brugere i sammenkædede kanaler kan høre hinanden, så længe den snakkende bruger har &lt;i&gt;tale&lt;/i&gt;-privilegiet i kanalen med lytterne. Du skal have sammenkæd-privilegiet i begge kanaler for at oprette en sammenkædning, men kun i én af kanalerne for at fjerne sammenkædningen.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>This represents the permission to write text messages to other users in this channel.</source>
        <translation>Dette repræsenterer rettigheden til at skrive tekstbeskeder til andre brugere i denne kanal.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This represents the permission to forcibly remove users from the server.</source>
        <translation>Dette repræsenterer rettigheden til at tvangsfjerne brugere fra serveren.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This represents the permission to permanently remove users from the server.</source>
        <translation>Dette repræsenterer rettigheden til permanent at fjerne brugere fra serveren.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This represents the permission to register and unregister users on the server.</source>
        <translation>Dette repræsenterer rettigheden til at registrere og fjerne registreringen af brugere på serveren.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This represents the permission to register oneself on the server.</source>
        <translation>Dette repræsenterer rettigheden til at registrere sig selv på serveren.</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Whisper</source>
        <translation>Hvisk</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Move</source>
        <translation>Flyt</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Text message</source>
        <translation>Tekstbeskeder</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Kick</source>
        <translation>Kick</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ban</source>
        <translation>Bandlys</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Register User</source>
        <translation>Registrér bruger</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Register Self</source>
        <translation>Registrér selv</translation>
    </message>
    <message>
        <location line="-28"/>
        <source>Write ACL</source>
        <translation>Skriv ACL</translation>
    </message>
</context>
<context>
    <name>ChatbarTextEdit</name>
    <message>
        <location filename="CustomElements.cpp" line="+100"/>
        <source>Paste and &amp;Send</source>
        <oldsource>Paste and send</oldsource>
        <translation>&amp;Indsæt og send</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>&lt;center&gt;Type chat message here&lt;/center&gt;</source>
        <translation>&lt;center&gt;Skriv chatbesked hér&lt;/center&gt;</translation>
    </message>
</context>
<context>
    <name>ClientUser</name>
    <message>
        <location filename="ClientUser.cpp" line="+134"/>
        <source>Friend</source>
        <translation>Ven</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Authenticated</source>
        <translation>Autentificeret</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Priority speaker</source>
        <translation>Prioriteret taler</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Recording</source>
        <translation>Optager</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Muted (server)</source>
        <translation>Mikrofon deaktiveret (server)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deafened (server)</source>
        <translation>Lyd deaktiveret (server)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Local Ignore (Text messages)</source>
        <translation>Ignorér lokalt (tekstbeskeder)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Local Mute</source>
        <translation>Lokal deaktivering af mikrofon</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Muted (self)</source>
        <translation>Mikrofon deaktiveret (selv)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deafened (self)</source>
        <translation>Lyd deaktiveret (selv)</translation>
    </message>
</context>
<context>
    <name>ConfigDialog</name>
    <message>
        <location filename="ConfigDialog.cpp" line="+55"/>
        <source>Accept changes</source>
        <translation>Acceptér ændringer</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This button will accept current settings and return to the application.&lt;br /&gt;The settings will be stored to disk when you leave the application.</source>
        <translation>Denne knap vil anvende nuværende indstillinger og vende tilbage til programmet.&lt;br /&gt;Indstillingerne vil blive gemt, når du forlader programmet.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Reject changes</source>
        <translation>Forkast ændringer</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This button will reject all changes and return to the application.&lt;br /&gt;The settings will be reset to the previous positions.</source>
        <translation>Denne knap vil forkaste alle ændringer og vende tilbage til programmet.&lt;br /&gt;Indstillingerne vil blive sat til deres tidligere positioner.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Apply changes</source>
        <translation>Anvend ændringer</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This button will immediately apply all changes.</source>
        <translation>Denne knap vil øjeblikkeligt anvende alle ændringer.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Undo changes for current page</source>
        <translation>Fortryd ændringer på nuværende side</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This button will revert any changes done on the current page to the most recent applied settings.</source>
        <translation>Denne knap vil genskabe alle tidligere anvendte indstillinger for den nuværende side.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Restore defaults for current page</source>
        <translation>Genskab standardindstillinger for nuværende side</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This button will restore the defaults for the settings on the current page. Other pages will not be changed.&lt;br /&gt;To restore all settings to their defaults, you will have to use this button on every page.</source>
        <oldsource>This button will restore the settings for the current page only to their defaults. Other pages will not be changed.&lt;br /&gt;To restore all settings to their defaults, you will have to use this button on every page.</oldsource>
        <translation>Denne knap vil genskabe indstillingerne for den nuværende side til deres oprindelige standardindstilling. Der vil ikke blive ændret på andre sider.&lt;br /&gt;For at genskabe alle standardindstillinger skal du bruge denne knap på hver enkelt side.</translation>
    </message>
    <message>
        <location filename="ConfigDialog.ui"/>
        <source>Mumble Configuration</source>
        <translation>Mumble konfiguration</translation>
    </message>
    <message>
        <location/>
        <source>Advanced</source>
        <translation>Avanceret</translation>
    </message>
</context>
<context>
    <name>ConnectDialog</name>
    <message>
        <location filename="ConnectDialog.cpp" line="+935"/>
        <source>Connecting to %1</source>
        <translation>Opretter forbindelse til %1</translation>
    </message>
    <message>
        <location line="-538"/>
        <location line="+538"/>
        <source>Enter username</source>
        <translation>Skriv brugernavn</translation>
    </message>
    <message>
        <location line="-538"/>
        <source>Adding host %1</source>
        <translation>Tilføjer vært %1</translation>
    </message>
    <message>
        <location filename="ConnectDialog.ui"/>
        <location filename="ConnectDialog.cpp" line="+71"/>
        <source>Servername</source>
        <translation>Servernavn</translation>
    </message>
    <message>
        <location filename="ConnectDialog.cpp" line="+1"/>
        <source>Hostname</source>
        <translation>Værtsnavn</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Bonjour name</source>
        <translation>Bonjour navn</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Port</source>
        <translation>Port</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Addresses</source>
        <translation>Adresser</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Website</source>
        <translation>Websted</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Packet loss</source>
        <translation>Pakketab</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Ping (80%)</source>
        <translation>Ping (80%)</translation>
    </message>
    <message>
        <location line="+0"/>
        <location line="+2"/>
        <source>%1 ms</source>
        <translation>%1 ms</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Ping (95%)</source>
        <translation>Ping (95%)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Bandwidth</source>
        <translation>Båndbredde</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>%1 kbit/s</source>
        <translation>%1 kbit/s</translation>
    </message>
    <message>
        <location line="+299"/>
        <source>&amp;Connect</source>
        <translation>&amp;Opret forbindelse</translation>
    </message>
    <message>
        <location line="+53"/>
        <source>&amp;Filters</source>
        <translation>&amp;Filtre</translation>
    </message>
    <message>
        <location filename="ConnectDialog.ui"/>
        <location filename="ConnectDialog.cpp" line="-351"/>
        <source>Users</source>
        <translation>Brugere</translation>
    </message>
    <message>
        <location filename="ConnectDialog.cpp" line="+1"/>
        <source>Version</source>
        <translation>Version</translation>
    </message>
    <message>
        <location filename="ConnectDialog.ui"/>
        <location filename="ConnectDialog.cpp" line="+299"/>
        <source>&amp;Add New...</source>
        <oldsource>Add New...</oldsource>
        <translation>&amp;Tilføj ny...</translation>
    </message>
    <message>
        <location filename="ConnectDialog.cpp" line="+735"/>
        <source>Failed to fetch server list</source>
        <translation>Hentning af serverliste mislykkedes</translation>
    </message>
    <message>
        <location filename="ConnectDialog.ui"/>
        <source>Mumble Server Connect</source>
        <translation>Mumble serverforbindelse</translation>
    </message>
    <message>
        <location/>
        <source>Ping</source>
        <translation>Ping</translation>
    </message>
    <message>
        <location/>
        <source>Remove from Favorites</source>
        <translation>Fjern fra favoritter</translation>
    </message>
    <message>
        <location/>
        <location filename="ConnectDialog.cpp" line="-729"/>
        <source>&amp;Edit...</source>
        <oldsource>Edit...</oldsource>
        <translation>&amp;Redigér...</translation>
    </message>
    <message>
        <location/>
        <source>Add custom server</source>
        <translation>Tilføj brugerdefineret server</translation>
    </message>
    <message>
        <location/>
        <source>Add to &amp;Favorites</source>
        <oldsource>Add to Favorites</oldsource>
        <translation>Tilføj til &amp;favoritter</translation>
    </message>
    <message>
        <location/>
        <source>Open &amp;Webpage</source>
        <oldsource>Open Webpage</oldsource>
        <translation>Åben &amp;websted</translation>
    </message>
    <message>
        <location/>
        <source>Show &amp;Reachable</source>
        <oldsource>Show Reachable</oldsource>
        <translation>Vis &amp;opnåelige</translation>
    </message>
    <message>
        <location/>
        <source>Show all servers that respond to ping</source>
        <translation>Vis alle servere der besvare ping</translation>
    </message>
    <message>
        <location/>
        <source>Show &amp;Populated</source>
        <oldsource>Show Populated</oldsource>
        <translation>Vis &amp;befolkede</translation>
    </message>
    <message>
        <location/>
        <source>Show all servers with users</source>
        <translation>Vis alle servere med brugere</translation>
    </message>
    <message>
        <location/>
        <source>Show &amp;All</source>
        <oldsource>Show All</oldsource>
        <translation>Vis &amp;alle</translation>
    </message>
    <message>
        <location/>
        <source>Show all servers</source>
        <translation>Vis alle servere</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Copy</source>
        <translation>&amp;Kopiér</translation>
    </message>
    <message>
        <location/>
        <source>Copy favorite link to clipboard</source>
        <translation>Kopiér favorit link til udklipsholder</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Paste</source>
        <translation>&amp;Indsæt</translation>
    </message>
    <message>
        <location/>
        <source>Paste favorite from clipboard</source>
        <translation>Indsæt favorit fra udklipsholder</translation>
    </message>
</context>
<context>
    <name>ConnectDialogEdit</name>
    <message>
        <location filename="ConnectDialogEdit.ui"/>
        <source>Edit Server</source>
        <translation>Redigér server</translation>
    </message>
    <message>
        <location/>
        <source>Name of the server</source>
        <translation>Navn på serveren</translation>
    </message>
    <message>
        <location/>
        <source>A&amp;ddress</source>
        <translation>&amp;Adresse</translation>
    </message>
    <message>
        <location/>
        <source>Internet address of the server.</source>
        <oldsource>Internet address of the server. </oldsource>
        <translation>Internetadresse for serveren.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Address&lt;/b&gt;&lt;br/&gt;
Internet address of the server. This can be a normal hostname, an IPv4/IPv6 address or a Bonjour service identifier. Bonjour service identifiers have to be prefixed with a &apos;@&apos; to be recognized by Mumble.</source>
        <oldsource>&lt;b&gt;Address&lt;/b&gt;&lt;/br&gt;
Internet address of the server. This can be a normal hostname, an ipv4/6 address or a bonjour service identifier. Bonjour service identifiers have to be prefixed with a &apos;@&apos; to be recognized by Mumble.</oldsource>
        <translation>&lt;b&gt;Addresse&lt;/b&gt;&lt;br/&gt;
Internetadressen for serveren. Dette kan være et normalt værtsnavn, en IPv4/IPv6-adresse eller en Bonjour-tjeneste identifikator. Bonjour-tjeneste identifikatorer skal have et &apos;@&apos; foran for at blive genkendt af Mumble.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Port</source>
        <translation>&amp;Port</translation>
    </message>
    <message>
        <location/>
        <source>Port on which the server is listening</source>
        <translation>Port som serveren lytter på</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Port&lt;/b&gt;&lt;br/&gt;
Port on which the server is listening. If the server is identified by a Bonjour service identifier this field will be ignored.</source>
        <translation>&lt;b&gt;Port&lt;/b&gt;&lt;br/&gt;
Port som serveren lytter på. Hvis serveren er opdaget af Bonjour-tjeneste finderen, vil dette felt blive ignoreret.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Username</source>
        <translation>&amp;Brugernavn</translation>
    </message>
    <message>
        <location/>
        <source>Username to send to the server</source>
        <translation>Brugernavn der skal sendes til serveren</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Username&lt;/b&gt;&lt;br/&gt;
Username to send to the server. Be aware that the server can impose restrictions on how a username might look like. Also your username could already be taken by another user.</source>
        <translation>&lt;b&gt;Brugernavn&lt;/b&gt;&lt;br/&gt;
Brugernavn der skal sendes til serveren. Vær opmærksom på at serveren kan have restriktioner, for hvordan et brugernavn må se ud. Desuden kan dit brugernavn allerede være taget af en anden bruger.</translation>
    </message>
    <message>
        <location/>
        <source>Label</source>
        <translatorcomment>&quot;Etikette&quot; kunne måske også bruges, men &quot;Navn&quot; er mere forståeligt</translatorcomment>
        <translation>Navn</translation>
    </message>
    <message>
        <location filename="ConnectDialog.cpp" line="-81"/>
        <source>Add Server</source>
        <translation>Tilføj server</translation>
    </message>
    <message>
        <location filename="ConnectDialogEdit.ui"/>
        <source>Password</source>
        <translation>Adgangskode</translation>
    </message>
    <message>
        <location/>
        <source>Password to send to the server</source>
        <translation>Adgangskoden der bruges til serveren</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Password&lt;/b&gt;&lt;br/&gt;
Password to be sent to the server on connect. This password is needed when connecting as &lt;i&gt;SuperUser&lt;/i&gt; or to a server using password authentication. If not entered here the password will be queried on connect.</source>
        <translation>&lt;b&gt;Adgangskode&lt;/b&gt;&lt;br/&gt;
Adgangskoden der bruges til serveren, når der oprettes forbindelse. Denne adgangskode er påkrævet, når man opretter forbindelse som &lt;i&gt;SuperUser&lt;/i&gt; eller til en server, der bruger adgangskode-autentificering. Hvis adgangskoden ikke indtastes hér, vil den blive forespurgt, når der oprettes forbindelse.</translation>
    </message>
    <message>
        <location/>
        <source>Show password</source>
        <translation>Vis adgangskode</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Label&lt;/b&gt;&lt;br/&gt;
Label of the server. This is what the server will be named like in your server list and can be chosen freely.</source>
        <translation>&lt;b&gt;Navn&lt;/b&gt;&lt;br/&gt;
Navn på serveren. Dette er, hvad serveren vil blive navngivet som i din serverliste og kan frit vælges.</translation>
    </message>
</context>
<context>
    <name>CoreAudioSystem</name>
    <message>
        <location filename="CoreAudio.cpp" line="+87"/>
        <source>Default Device</source>
        <translation>Standardenhed</translation>
    </message>
</context>
<context>
    <name>CrashReporter</name>
    <message>
        <location filename="CrashReporter.cpp" line="+40"/>
        <source>Mumble Crash Report</source>
        <translation>Mumble nedbrudsrapport</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>&lt;p&gt;&lt;b&gt;We&apos;re terribly sorry, but it seems Mumble has crashed. Do you want to send a crash report to the Mumble developers?&lt;/b&gt;&lt;/p&gt;&lt;p&gt;The crash report contains a partial copy of Mumble&apos;s memory at the time it crashed, and will help the developers fix the problem.&lt;/p&gt;</source>
        <translation>&lt;p&gt;&lt;b&gt;Vi undskylder mange gange, men det ser ud som om Mumble gik ned. Vil du sende en nedbrudsrapport til udviklerne af Mumble?&lt;/b&gt;&lt;/p&gt;&lt;p&gt;Nedbrudsrapporten indeholder en delvis kopi af Mumbles hukommelse på det tidspunkt det gik ned, og dette kan hjælpe udviklerne til at løse problemet.&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Email address (optional)</source>
        <translation>Email-adresse (valgfri)</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Please describe briefly, in English, what you were doing at the time of the crash</source>
        <oldsource>Please briefly describe what you were doing at the time of the crash</oldsource>
        <translation>Skriv venligst i korte træk, på engelsk, hvad du gjorde da Mumble gik ned</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Send Report</source>
        <translation>Send rapport</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Don&apos;t send report</source>
        <translation>Send ikke rapport</translation>
    </message>
    <message>
        <location line="+24"/>
        <source>Crash upload successful</source>
        <translation>Nedbrudsrapport vellykket uploadet</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Thank you for helping make Mumble better!</source>
        <translation>Tak fordi du hjælper med at gøre Mumble bedre!</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+2"/>
        <source>Crash upload failed</source>
        <translation>Det mislykkedes at uploade nedbrudsrapporten</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>We&apos;re really sorry, but it appears the crash upload has failed with error %1 %2. Please inform a developer.</source>
        <translation>Vi undeskylder mange gange, men det ser ud som om uploading af nedbrudsrapporten mislykkedes med fejlen %1 %2. Vær venlig at informér en udvikler.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>This really isn&apos;t funny, but apparently there&apos;s a bug in the crash reporting code, and we&apos;ve failed to upload the report. You may inform a developer about error %1</source>
        <translation>Det her er ikke sjovt, for der er tilsyneladende en fejl i nedbrudsrapporterings-koden, og rapporten kunne derfor ikke uploades. Du må gerne informere en udvikler om fejlen %1</translation>
    </message>
    <message>
        <location line="+102"/>
        <source>Uploading crash report</source>
        <translation>Uploader nedbrudsrapport</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Abort upload</source>
        <translation>Afbryd upload</translation>
    </message>
</context>
<context>
    <name>DXAudioInput</name>
    <message>
        <location filename="DirectSound.cpp" line="+176"/>
        <source>Default DirectSound Voice Input</source>
        <translation>Standard DirectSounds stemmeindspilning</translation>
    </message>
    <message>
        <location line="+451"/>
        <source>Opening chosen DirectSound Input device failed. No microphone capture will be done.</source>
        <translation>Åbning af valgte DirectSound indspilningsenhed mislykkedes. Ingen mikrofonopfangelse vil blive udført.</translation>
    </message>
    <message>
        <location line="-83"/>
        <source>Opening chosen DirectSound Input failed. Default device will be used.</source>
        <translation>Åbning af valgte DirectSound indspilning mislykkedes. Standardenheden vil blive brugt.</translation>
    </message>
    <message>
        <location line="+78"/>
        <source>Lost DirectSound input device.</source>
        <translation>Mistede DirectSound indspilningsenhed.</translation>
    </message>
</context>
<context>
    <name>DXAudioOutput</name>
    <message>
        <location line="-486"/>
        <source>Default DirectSound Voice Output</source>
        <translation>Standard DirectSound lydafspilning</translation>
    </message>
    <message>
        <location line="+243"/>
        <source>Opening chosen DirectSound Output failed. Default device will be used.</source>
        <translation>Åbning af valgte DirectSound afspilnings mislykkedes. Standardenhed vil blive brugt.</translation>
    </message>
    <message>
        <location line="+73"/>
        <source>Lost DirectSound output device.</source>
        <translation>Mistede DirectSound afspilningsenhed.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Opening chosen DirectSound Output failed. No audio will be heard.</source>
        <translation>Åbning af valgte DirectSounds afspilnings mislykkedes. Ingen lyd vil kunne høres.</translation>
    </message>
</context>
<context>
    <name>Database</name>
    <message>
        <location filename="Database.cpp" line="+118"/>
        <source>Mumble failed to initialize a database in any
of the possible locations.</source>
        <translation>Det mislykkedes Mumble at initialisere en database i nogen
som helst mulige placeringer.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>The database &apos;%1&apos; is read-only. Mumble cannot store server settings (i.e. SSL certificates) until you fix this problem.</source>
        <oldsource>The database &apos;%1&apos; is read-only. Mumble can not store server settings (ie. SSL certificates) until you fix this problem.</oldsource>
        <translation>Databasen &apos;%1&apos; er kun læsbar (read-only). Mumble kan ikke gemme server-indstillinger (fx SSL-certifikater), før du har fikset dette problem.</translation>
    </message>
</context>
<context>
    <name>DockTitleBar</name>
    <message>
        <location filename="CustomElements.cpp" line="+186"/>
        <source>Drag here</source>
        <translation>Træk hér</translation>
    </message>
</context>
<context>
    <name>GlobalShortcut</name>
    <message>
        <location filename="GlobalShortcut.ui"/>
        <source>Shortcuts</source>
        <translation>Genveje</translation>
    </message>
    <message>
        <location/>
        <source>List of configured shortcuts</source>
        <translation>Liste over konfigurerede genveje</translation>
    </message>
    <message>
        <location/>
        <source>Function</source>
        <translation>Funktion</translation>
    </message>
    <message>
        <location/>
        <source>Data</source>
        <translation>Data</translation>
    </message>
    <message>
        <location/>
        <source>Shortcut</source>
        <translation>Genvej</translation>
    </message>
    <message>
        <location/>
        <source>Suppress</source>
        <translation>Eneret</translation>
    </message>
    <message>
        <location/>
        <source>Add new shortcut</source>
        <translation>Tilføj ny genvej</translation>
    </message>
    <message>
        <location/>
        <source>This will add a new global shortcut</source>
        <translation>Dette vil tilføje en ny global genvej</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Add</source>
        <translation>&amp;Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Remove selected shortcut</source>
        <translation>Fjern valgte genvej</translation>
    </message>
    <message>
        <location/>
        <source>This will permanently remove a selected shortcut.</source>
        <translation>Dette vil permanent fjerne en valgt genvej.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove</source>
        <translation>&amp;Fjern</translation>
    </message>
    <message>
        <location/>
        <source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Mumble can currently only use mouse buttons and keyboard modifier keys (Alt, Ctrl, Cmd, etc.) for global shortcuts.&lt;/p&gt;&lt;p&gt;If you want more flexibility, you can enable &lt;span style=&quot; font-style:italic;&quot;&gt;Access for assistive devices&lt;/span&gt; in the system&apos;s Accessibility preferences. However, please note that this change also potentially allows malicious programs to read what is typed on your keyboard.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Mumble kan på nuværende tidspunkt kun bruge knapper på musen og tastatur-modifikationsknapper (Alt, Ctrl, Cmd, etc.) som globale genveje.&lt;/p&gt;&lt;p&gt;Hvis du ønsker større fleksibilitet, kan du aktivere &lt;span style=&quot; font-style:italic;&quot;&gt;Adgang for hjælpemiddelenheder&lt;/span&gt; i systemets tilgængelighedspræferencer. Vær imidlertid opmærksom på, at denne ændring også potentielt tillader ondsindede programmer, at læse hvad der blivet skrevet på tastaturet.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Open Accessibility Preferences</source>
        <translation>Åben tilgængelighedspræferencer</translation>
    </message>
    <message>
        <location/>
        <source>Skip</source>
        <translation>Spring over</translation>
    </message>
    <message>
        <location/>
        <source>Enable Global Shortcuts</source>
        <translation>Aktivér globale genveje</translation>
    </message>
</context>
<context>
    <name>GlobalShortcutConfig</name>
    <message>
        <location filename="GlobalShortcut.cpp" line="+654"/>
        <source>Shortcuts</source>
        <translation>Genveje</translation>
    </message>
    <message>
        <location line="+52"/>
        <source>Shortcut button combination.</source>
        <translation>Kombination af genvejsknapper.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;b&gt;This is the global shortcut key combination.&lt;/b&gt;&lt;br /&gt;Click this field and then press the desired key/button combo to rebind. Double-click to clear.</source>
        <oldsource>&lt;b&gt;This is the global shortcut key combination.&lt;/b&gt;&lt;br /&gt;Double-click this field and then the desired key/button combo to rebind.</oldsource>
        <translation>&lt;b&gt;Dette er den globale genvejstast kombination.&lt;/b&gt;&lt;br /&gt;Klik i dette felt og tryk derefter på den ønskede knap/tastkombination. Dobbeltklik for at fjerne.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Suppress keys from other applications</source>
        <translation>Tilbagehold knappen fra andre programmer</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>&lt;b&gt;This hides the button presses from other applications.&lt;/b&gt;&lt;br /&gt;Enabling this will hide the button (or the last button of a multi-button combo) from other applications. Note that not all buttons can be suppressed.</source>
        <translation>&lt;b&gt;Dette fjerner tryk på knappen fra andre programmer.&lt;/b&gt;&lt;br /&gt;Aktivering vil skjule tryk på knappen (eller i det mindste den sidste knap i en tastkombination) fra andre programmer. Vær opmærksom på at ikke alle knapper kan tilbageholdes.</translation>
    </message>
</context>
<context>
    <name>GlobalShortcutTarget</name>
    <message>
        <location filename="GlobalShortcutTarget.ui"/>
        <source>Whisper Target</source>
        <translation>Hviskemål</translation>
    </message>
    <message>
        <location/>
        <source>Whisper to list of Users</source>
        <translation>Hvisk til liste over brugere</translation>
    </message>
    <message>
        <location/>
        <source>Channel Target</source>
        <translation>Kanalmål</translation>
    </message>
    <message>
        <location/>
        <source>Restrict to Group</source>
        <translation>Begræns til gruppe</translation>
    </message>
    <message>
        <location/>
        <source>If specified, only members of this group will receive the whisper.</source>
        <translation>Hvis anført vil kun medlemmer af denne gruppe modtage hvisken.</translation>
    </message>
    <message>
        <location/>
        <source>List of users</source>
        <translation>Liste over brugere</translation>
    </message>
    <message>
        <location/>
        <source>Add</source>
        <translation>Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Remove</source>
        <translation>Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Modifiers</source>
        <translation>Modifikatorer</translation>
    </message>
    <message>
        <location/>
        <source>Do not send positional audio information when using this whisper shortcut.</source>
        <translation>Send ikke placeringsbestemt lydinformation når hviskegenvejen bliver brugt.</translation>
    </message>
    <message>
        <location/>
        <source>Ignore positional audio</source>
        <translation>Ignorér placeringsbestemt lyd</translation>
    </message>
    <message>
        <location/>
        <source>Shout to Linked channels</source>
        <translation>Råb til sammenkædede kanaler</translation>
    </message>
    <message>
        <location/>
        <source>Shout to subchannels</source>
        <translation>Råb til underkanaler</translation>
    </message>
    <message>
        <location/>
        <source>Shout to Channel</source>
        <translation>Råb til kanal</translation>
    </message>
    <message>
        <location/>
        <source>The whisper will also be transmitted to linked channels.</source>
        <translation>Denne hvisken vil også blive transmitteret til sammenkædede kanaler.</translation>
    </message>
    <message>
        <location/>
        <source>The whisper will also be sent to the subchannels of the channel target.</source>
        <translation>Hvisken vil også blive sendt til underkanalerne for kanal-målet.</translation>
    </message>
</context>
<context>
    <name>GlobalShortcutX</name>
    <message>
        <location filename="GlobalShortcut_unix.cpp" line="+346"/>
        <source>Mouse %1</source>
        <translation>Mus %1</translation>
    </message>
</context>
<context>
    <name>LCD</name>
    <message>
        <location filename="LCD.cpp" line="+282"/>
        <source>Not connected</source>
        <translation>Ingen forbindelse oprettet</translation>
    </message>
</context>
<context>
    <name>LCDConfig</name>
    <message>
        <location line="-160"/>
        <source>Enable this device</source>
        <translation>Aktivér denne enhed</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>LCD</source>
        <translation>LCD</translation>
    </message>
    <message>
        <location filename="LCD.ui"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location/>
        <source>Devices</source>
        <translation>Enheder</translation>
    </message>
    <message>
        <location/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;This is the list of available LCD devices on your system.  It lists devices by name, but also includes the size of the display. Mumble supports outputting to several LCD devices at a time.&lt;/p&gt;
&lt;h3&gt;Size:&lt;/h3&gt;
&lt;p&gt;
This field describes the size of an LCD device. The size is given either in pixels (for Graphic LCDs) or in characters (for Character LCDs).&lt;/p&gt;
&lt;h3&gt;Enabled:&lt;/h3&gt;
&lt;p&gt;This decides whether Mumble should draw to a particular LCD device.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Dette er listen over tilgængelige LCD-enheder på dit system. Enhederne er vist efter navn, men der vises også størrelsen af displayet. Mumble understøtter visning på flere LCD-enheder på samme tid.&lt;/p&gt;
&lt;h3&gt;Størrelse:&lt;/h3&gt;
&lt;p&gt;
Dette felt beskriver størrelsen af en LCD-enhed. Størrelsen er enten opgivet i pixels (for grafiske LCD&apos;er) eller i tegn (for tegnbaserede LCD&apos;er)&lt;/p&gt;
&lt;h3&gt;Aktiveret:&lt;/h3&gt;
&lt;p&gt;Dette afgør om Mumble skal aktivere visning på den pågældende enhed.&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Size</source>
        <translation>Størrelse</translation>
    </message>
    <message>
        <location/>
        <source>Enabled</source>
        <translation>Aktiveret</translation>
    </message>
    <message>
        <location/>
        <source>Views</source>
        <translation>Visninger</translation>
    </message>
    <message>
        <location/>
        <source>Minimum Column Width</source>
        <translation>Minimum kolonnebredde</translation>
    </message>
    <message>
        <location/>
        <source>&lt;p&gt;This option decides the minimum width a column in the User View.&lt;/p&gt;
&lt;p&gt;If too many people are speaking at once, the User View will split itself into columns. You can use this option to pick a compromise between number of users shown on the LCD, and width of user names.&lt;/p&gt;
</source>
        <translation>&lt;p&gt;Denne valgmulighed afgør minimumsbredden af en kolonne i brugervisningen.&lt;/p&gt;
&lt;p&gt;Hvis for mange folk snakker på engang, vil brugervisningen dele sig selv i kolonner. Du kan bruge denne valgmulighed til at vælge et kompromis mellem antallet af brugere vist på LCD&apos;en, og bredden af brugernavne.&lt;/p&gt;
</translation>
    </message>
    <message>
        <location/>
        <source>This setting decides the width of column splitter.</source>
        <translation>Denne indstilning afgør bredden af kolonnemellemrumene.</translation>
    </message>
    <message>
        <location/>
        <source>Splitter Width</source>
        <translation>Bredde af mellemrum</translation>
    </message>
</context>
<context>
    <name>Log</name>
    <message>
        <location filename="Log.cpp" line="+208"/>
        <source>Debug</source>
        <translation>Fejlfinding</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Critical</source>
        <translation>Kritisk</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Warning</source>
        <translation>Advarsel</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Information</source>
        <translation>Information</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Server Connected</source>
        <translation>Forbindelse til server oprettet</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Server Disconnected</source>
        <translation>Forbindelse til server afbrudt</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>You self-muted/deafened</source>
        <translation>Du (de)aktiverede selv din mikrofon/lyd</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Other self-muted/deafened</source>
        <translation>Andre (de)aktiverede deres mikrofon/lyd</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Permission Denied</source>
        <translation>Tilladelse nægtet</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Text Message</source>
        <translation>Tekstbesked</translation>
    </message>
    <message>
        <location line="-13"/>
        <source>User Joined Server</source>
        <translation>Bruger oprettede forbindelse til server</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User Left Server</source>
        <translation>Bruger forlod server</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User recording state changed</source>
        <translation>Brugers optagelse-tilstand ændret</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User kicked (you or by you)</source>
        <translation>Bruger kicked (dig eller af dig)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User kicked</source>
        <translation>Bruger kicked</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>User muted (you)</source>
        <translation>Bruger deaktiverede mikrofon (dig)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User muted (by you)</source>
        <translation>Bruger deaktiverede mikrofon (af dig)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User muted (other)</source>
        <translation>Bruger deaktiverede mikrofon (andre)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User Joined Channel</source>
        <translation>Bruger deltager i kanal</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User Left Channel</source>
        <translation>Bruger forlod kanal</translation>
    </message>
    <message>
        <location line="+59"/>
        <source>the server</source>
        <translation>serveren</translation>
    </message>
    <message>
        <location line="+117"/>
        <source>[[ Text object too large to display ]]</source>
        <translation>[[ Tekstobjekt for stort til at blive vist ]]</translation>
    </message>
    <message>
        <location line="+47"/>
        <source>[Date changed to %1]
</source>
        <translation>[Datoen skiftede til %1]
</translation>
    </message>
    <message>
        <location line="+66"/>
        <source>link to %1</source>
        <translation>link til %1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>ftp link to %1</source>
        <translation>ftp-link til %1</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>player link</source>
        <translation>bruger-link</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>channel link</source>
        <translation>kanal-link</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 link</source>
        <translation>%1 link</translation>
    </message>
</context>
<context>
    <name>LogConfig</name>
    <message>
        <location line="-441"/>
        <source>Toggle console for %1 events</source>
        <translation>Slå konsol til/fra for %1-hændelser</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Toggle pop-up notifications for %1 events</source>
        <translation>Slå pop-up-meddelelser til/fra for %1-hændelser</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Toggle Text-To-Speech for %1 events</source>
        <translation>Slå Tekst-til-tale til/fra for %1-hændelser</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Click here to toggle sound notification for %1 events</source>
        <translation>Klik her for at slå lydmeddelelser til/fra for %1-hændelser</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Path to sound file used for sound notifications in the case of %1 events&lt;br /&gt;Single click to play&lt;br /&gt;Double-click to change</source>
        <translation>Sti til lydfilen der skal bruges ved lydnotifikationer i tilfælde af %1-hændelser&lt;br /&gt;Enkeltklik for at afspille&lt;br /&gt;Dobbeltklik for at skifte</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Click here to toggle console output for %1 events.&lt;br /&gt;If checked, this option makes Mumble output all %1 events in its message log.</source>
        <translation>Klik hér for at slå udskrivning i konsol af %1-hændelser til/fra.&lt;br /&gt;Hvis denne er markeret, vil denne valgmulighed få Mumble til at udskrive alle %1-hændelser i beskedloggen.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Click here to toggle pop-up notifications for %1 events.&lt;br /&gt;If checked, a notification pop-up will be created by Mumble for every %1 event.</source>
        <oldsource>Click here to toggle pop-up notifications for %1 events.&lt;br /&gt;If checked, a notification pop-up will be created by mumble for every %1 event.</oldsource>
        <translation>Klik her for at slå pop-up-notifikationer for %1-hændelser til/fra.&lt;br /&gt;Hvis denne er markeret, vil der blive lavet en pop-up-notifikation ved alle %1-hændelser.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Path to sound file used for sound notifications in the case of %1 events.&lt;br /&gt;Single click to play&lt;br /&gt;Double-click to change&lt;br /&gt;Ensure that sound notifications for these events are enabled or this field will not have any effect.</source>
        <translation>Sti til lydfil der skal bruges ved lydnotifikationer i tilfælde af %1-hændelser.&lt;br /&gt;Enkeltklik for at afspille&lt;br /&gt;Dobbeltklik for at skifte&lt;br /&gt;Vær sikker på at lydnotifikationer for disse hændelser er slået til, eller vil dette felt ikke have nogen virkning.</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>Click here to toggle Text-To-Speech for %1 events.&lt;br /&gt;If checked, Mumble uses Text-To-Speech to read %1 events out loud to you. Text-To-Speech is also able to read the contents of the event which is not true for sound files. Text-To-Speech and sound files cannot be used at the same time.</source>
        <oldsource>Click here to toggle sound notification for %1 events.&lt;br /&gt;If checked, Mumble uses a soundfile predefined by you to indicate %1 events. Soundfiles and Text-To-Speech cannot be used at the same time.</oldsource>
        <translation>Klik hér for at slå Tekst-til-tale for %1-hændelser til/fra.&lt;br /&gt;Hvis denne er markeret, vil Mumble bruge Tekst-til-tale til at læse %1-hændelser højt for dig. Tekst-til-tale er også i stand til at læse indholdet af hændelserne, der ikke er erstattet af lydfiler. Tekst-til-tale og lydfiler kan ikke bruges på samme tid.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Click here to toggle sound notification for %1 events.&lt;br /&gt;If checked, Mumble uses a sound file predefined by you to indicate %1 events. Sound files and Text-To-Speech cannot be used at the same time.</source>
        <oldsource>Path to soundfile used for sound notifications in the case of %1 events.&lt;br /&gt;Single click to play&lt;br /&gt;Doubleclick to change&lt;br /&gt;Be sure that sound notifications for these events are enabled or this field will not have any effect.</oldsource>
        <translation>Klik hér for at slå lydmeddelelser for %1-hændelser til/fra.&lt;br /&gt;Hvis denne er markeret, vil Mumble bruge en lydfil, som er valgt af dig, til at indikere %1-hændelser. Lydfiler og Tekst-til-tale kan ikke bruges på samme tid.</translation>
    </message>
    <message>
        <location filename="Log.ui"/>
        <source>Messages</source>
        <translation>Beskeder</translation>
    </message>
    <message>
        <location/>
        <source>Message</source>
        <translation>Besked</translation>
    </message>
    <message>
        <location/>
        <source>Console</source>
        <translation>Konsol</translation>
    </message>
    <message>
        <location/>
        <source>Notification</source>
        <translation>Notifikation</translation>
    </message>
    <message>
        <location/>
        <source>Text-To-Speech</source>
        <translation>Tekst-til-tale</translation>
    </message>
    <message>
        <location/>
        <source>Soundfile</source>
        <translation>Lydfil</translation>
    </message>
    <message>
        <location/>
        <source>Path</source>
        <translation>Sti</translation>
    </message>
    <message>
        <location/>
        <source>Text To Speech</source>
        <translation>Tekst til tale</translation>
    </message>
    <message>
        <location/>
        <source>Volume</source>
        <translation>Lydstyrke</translation>
    </message>
    <message>
        <location/>
        <source>Volume of Text-To-Speech Engine</source>
        <translation>Lydstyrke for Tekst-til-tale</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the volume used for the speech synthesis.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Dette er lydstyrken for talen.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Length threshold</source>
        <translation>Længde tærskel</translation>
    </message>
    <message>
        <location/>
        <source>Message length threshold for Text-To-Speech Engine</source>
        <translation>Den maksimale længde af en besked til oplæsning</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is the length threshold used for the Text-To-Speech Engine.&lt;/b&gt;&lt;br /&gt;Messages longer than this limit will not be read aloud in their full length.</source>
        <translation>&lt;b&gt;Dette er tærsklen for længden af beskeder i Tekst-til-tale.&lt;/b&gt;&lt;br /&gt;Beskeder der er længere end denne grænse, vil ikke blive læst højt i deres fulde længde.</translation>
    </message>
    <message>
        <location/>
        <source> Characters</source>
        <translation> tegn</translation>
    </message>
    <message>
        <location/>
        <source>Whisper</source>
        <translation>Hviske</translation>
    </message>
    <message>
        <location/>
        <source>If checked you will only hear whispers from users you added to your friend list.</source>
        <translation>Hvis denne er markeret, vil du kun høre hvisken, fra venner du har tilføjet til din venneliste.</translation>
    </message>
    <message>
        <location/>
        <source>Only accept whispers from friends</source>
        <translation>Acceptér kun hvisken fra venner</translation>
    </message>
    <message>
        <location/>
        <source>If enabled text messages you send will be read back to you with TTS</source>
        <translation>Hvis denne er slået til, vil tekstbeskeder, som du sender, blive læst op for dig med tekst-til-tale</translation>
    </message>
    <message>
        <location/>
        <source>Read back own messages</source>
        <translation>Læs egne beskeder op</translation>
    </message>
    <message>
        <location/>
        <source>Chat Log</source>
        <translation>Chatlog</translation>
    </message>
    <message>
        <location/>
        <source>Maximum chat length</source>
        <translation>Maksimal længde af chat</translation>
    </message>
    <message>
        <location/>
        <source>Unlimited</source>
        <translation>Ubegrænset</translation>
    </message>
    <message>
        <location/>
        <source> Lines</source>
        <translation> Linjer</translation>
    </message>
</context>
<context>
    <name>LookConfig</name>
    <message>
        <location filename="LookConfig.cpp" line="+55"/>
        <location line="+11"/>
        <source>System default</source>
        <translation>Systemstandard</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>None</source>
        <translation>Ingen</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Only with users</source>
        <translation>Kun med brugere</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>All</source>
        <translation>Alle</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Ask</source>
        <translation>Spørg</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Do Nothing</source>
        <translation>Gør intet</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Move</source>
        <translation>Flyt</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>User Interface</source>
        <translation>Brugergrænseflade</translation>
    </message>
    <message>
        <location line="+155"/>
        <source>Choose skin file</source>
        <translation>Vælg temafil</translation>
    </message>
    <message>
        <location filename="LookConfig.ui"/>
        <source>This sets which channels to automatically expand. &lt;i&gt;None&lt;/i&gt; and &lt;i&gt;All&lt;/i&gt; will expand no or all channels, while &lt;i&gt;Only with users&lt;/i&gt; will expand and collapse channels as users join and leave them.</source>
        <translation>Dette indstiller hvilke kanaler der automatisk skal udvides. &lt;i&gt;Ingen&lt;/i&gt; og &lt;i&gt;Alle&lt;/i&gt; vil enten udvide ingen eller alle kanaler, hvorimod &lt;i&gt;Kun med brugere&lt;/i&gt; vil udvide og sammenklappe kanaler i takt med at brugere går ind og ud af dem.</translation>
    </message>
    <message>
        <location/>
        <source>List users above subchannels (requires restart).</source>
        <translation>Vis brugere over underkanaler (kræver genstart).</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;If set, users will be shown above subchannels in the channel view.&lt;/b&gt;&lt;br /&gt;A restart of Mumble is required to see the change.</source>
        <translation>&lt;b&gt;Hvis denne er markeret, vil brugere blive vist over underkanaler i kanaloversigten.&lt;/b&gt;&lt;br /&gt;Det er nødvendigt at genstarte Mumble for at anvende ændringen.</translation>
    </message>
    <message>
        <location/>
        <source>Users above Channels</source>
        <translation>Brugere over underkanaler</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;If set, will verify you want to quit if connected.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Hvis denne er markeret, vil du skulle bekræfte, at du vil afslutte, hvis du har oprettet forbindelse.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>This setting controls when the application will be always on top.</source>
        <translation>Denne indstilling kontrollerer, hvornår programmet altid vil være øverst.</translation>
    </message>
    <message>
        <location/>
        <source>Never</source>
        <translation>Aldrig</translation>
    </message>
    <message>
        <location/>
        <source>Always</source>
        <translation>Altid</translation>
    </message>
    <message>
        <location/>
        <source>In minimal view</source>
        <translation>I minimal visning</translation>
    </message>
    <message>
        <location/>
        <source>In normal view</source>
        <translation>I normal visning</translation>
    </message>
    <message>
        <location/>
        <source>Show number of users in each channel</source>
        <translation>Vis antallet af brugere i hver kanal</translation>
    </message>
    <message>
        <location/>
        <source>Show channel user count</source>
        <translation>Vis optælling af brugere</translation>
    </message>
    <message>
        <location/>
        <source>Displays talking status in system tray</source>
        <translation>Vis i ikonet i systembakken om du taler</translation>
    </message>
    <message>
        <location/>
        <source>Show talking status in tray icon</source>
        <translation>Vis i systembakken om du taler</translation>
    </message>
    <message>
        <location/>
        <source>Language</source>
        <translation>Sprog</translation>
    </message>
    <message>
        <location/>
        <source>Language to use (requires restart)</source>
        <translation>Sprog der skal bruges (kræver genstart)</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets which language Mumble should use.&lt;/b&gt;&lt;br /&gt;You have to restart Mumble to use the new language.</source>
        <translation>&lt;b&gt;Dette indstiller hvilket sprog Mumble skal bruge.&lt;/b&gt;&lt;br /&gt;Du skal genstarte Mumble for at bruge det nye sprog.</translation>
    </message>
    <message>
        <location/>
        <source>Look and Feel</source>
        <translation>Udseende og opførsel</translation>
    </message>
    <message>
        <location/>
        <source>Layout</source>
        <translation>Layout</translation>
    </message>
    <message>
        <location/>
        <source>Classic</source>
        <translation>Klassisk</translation>
    </message>
    <message>
        <location/>
        <source>Stacked</source>
        <translation>Stablet</translation>
    </message>
    <message>
        <location/>
        <source>Hybrid</source>
        <translation>Hybrid</translation>
    </message>
    <message>
        <location/>
        <source>Custom</source>
        <translation>Brugerdefineret</translation>
    </message>
    <message>
        <location/>
        <source>This changes the behavior when moving channels.</source>
        <translation>Dette ændrer opførslen når kanaler flyttes.</translation>
    </message>
    <message>
        <location/>
        <source>This sets the behavior of channel drags; it can be used to prevent accidental dragging. &lt;i&gt;Move&lt;/i&gt; moves the channel without prompting. &lt;i&gt;Do Nothing&lt;/i&gt; does nothing and prints an error message. &lt;i&gt;Ask&lt;/i&gt; uses a message box to confirm if you really wanted to move the channel.</source>
        <oldsource>This sets the behavior of channel drags; it can be used to prevent accidental dragging. &lt;i&gt;Move Channel&lt;/i&gt; moves the channel without prompting. &lt;i&gt;Do Nothing&lt;/i&gt; does nothing and prints an error message. &lt;i&gt;Ask&lt;/i&gt; uses a message box to confirm if you really wanted to move the channel.</oldsource>
        <translation>Dette indstiller opførslen ved flytning af kanaler; det kan bruges til at forhindre uønsket flytning. &lt;i&gt;Flyt&lt;/i&gt; flytter kanalen uden at spørge. &lt;i&gt;Gør ingenting&lt;/i&gt; gør ingenting og skriver en fejlbesked i loggen. &lt;i&gt;Spørg&lt;/i&gt; viser en dialogboks hvor du skal bekræfte, om du virkelig ønsker at flytte kanalen.</translation>
    </message>
    <message>
        <location/>
        <source>Style</source>
        <translation>Stil</translation>
    </message>
    <message>
        <location/>
        <source>Basic widget style</source>
        <translation>Grundlæggende widgetstil</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets the basic look and feel to use.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Dette indstiller det basale udseende og opførslen.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Skin</source>
        <translation>Tema</translation>
    </message>
    <message>
        <location/>
        <source>Skin file to use</source>
        <translation>Temafil der skal bruges</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This sets which skin Mumble should use.&lt;/b&gt;&lt;br /&gt;The skin is a style file applied on top of the basic widget style. If there are icons in the same directory as the style sheet, those will replace the default icons.</source>
        <translation>&lt;b&gt;Dette indstiller hvilket tema Mumble skal bruge.&lt;/b&gt;&lt;br /&gt;Temaet er en stil-fil anvendt ovenpå den basale widget-stil. Hvis der er ikoner i den samme mappe som stil-filen, vil disse erstatte standardikonerne.</translation>
    </message>
    <message>
        <location/>
        <source>Expand</source>
        <translation>Udvid kanaler</translation>
    </message>
    <message>
        <location/>
        <source>When to automatically expand channels</source>
        <translation>Hvornår kanaler automatisk skal udvides</translation>
    </message>
    <message>
        <location/>
        <source>Channel Dragging</source>
        <translation>Flytning af kanaler</translation>
    </message>
    <message>
        <location/>
        <source>Ask whether to close or minimize when quitting Mumble.</source>
        <translation>Spørg om du vil lukke eller minimere, når du afslutter Mumble.</translation>
    </message>
    <message>
        <location/>
        <source>Ask on quit while connected</source>
        <translation>Spørg før afslutning (hvis forbindelse er oprettet)</translation>
    </message>
    <message>
        <location/>
        <source>Always On Top</source>
        <translation>Altid øverst</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;If set, minimizing the Mumble main window will cause it to be hidden and accessible only from the tray. Otherwise, it will be minimized as a window normally would.&lt;/b&gt;</source>
        <translation>&lt;b&gt;Hvis denne er markeret, vil minimering af Mumble&apos;s hovedvindue få det til at blive skjult og kun være tilgængeligt fra systembakken. Ellers vil det blive minimeret, som et vindue normalt bliver.&lt;/b&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Hide in tray when minimized</source>
        <translation>Skjul i systembakken (når minimeret)</translation>
    </message>
    <message>
        <location/>
        <source>Hide the main Mumble window in the tray when it is minimized.</source>
        <translation>Skjul Mumble hovedvinduet i systembakken når det er minimeret.</translation>
    </message>
    <message>
        <location/>
        <source>This setting controls in which situations the application will stay always on top. If you select &lt;i&gt;Never&lt;/i&gt; the application will not stay on top. &lt;i&gt;Always&lt;/i&gt; will always keep the application on top. &lt;i&gt;In minimal view&lt;/i&gt; / &lt;i&gt;In normal view&lt;/i&gt; will only keep the application always on top when minimal view is activated / deactivated.</source>
        <translation>Denne indstilling kontrollere i hvilke situationer programmet altid vil være øverst. Hvis du vælger &lt;i&gt;Aldrig&lt;/i&gt; vil programmet ikke være øverst. &lt;i&gt;Altid&lt;/i&gt; vil altid holde programmet øverst. &lt;i&gt;I minimal visning&lt;/i&gt; / &lt;i&gt;I normal visning&lt;/i&gt; vil kun holde programmet øverst hele tiden når minimal visning er aktiveret / deaktiveret.</translation>
    </message>
    <message>
        <location/>
        <source>Show context menu in menu bar</source>
        <translation>Vis genvejsmenuen i menulinjen</translation>
    </message>
    <message>
        <location/>
        <source>Apply some high contrast optimizations for visually impaired users</source>
        <translation>Anvend nogle høje kontrast optimeringer for brugere med nedsat syn</translation>
    </message>
    <message>
        <location/>
        <source>Optimize for high contrast</source>
        <translation>Optimér for høj kontrast</translation>
    </message>
    <message>
        <location/>
        <source>Application</source>
        <translation>Program</translation>
    </message>
    <message>
        <location/>
        <source>Adds user and channel context menus into the menu bar</source>
        <translatorcomment>&quot;kanal- og brugermenu&quot; sounds better than &quot;bruger- og kanalmenu&quot;</translatorcomment>
        <translation>Tilføj kanal- og brugermenu i menulinjen</translation>
    </message>
    <message>
        <location/>
        <source>Tray Icon</source>
        <translation>Statusikon</translation>
    </message>
    <message>
        <location/>
        <source>Channel Tree</source>
        <translation>Kanaltræ</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Browse...</source>
        <translation>&amp;Gennemse...</translation>
    </message>
    <message>
        <location/>
        <source>Use selected item as the chat bar target</source>
        <translation>Brug valgte genstand som mål for chatbaren</translation>
    </message>
    <message>
        <location/>
        <source>Filter automatically hides empty channels</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MainWindow</name>
    <message>
        <location filename="MainWindow.cpp" line="+138"/>
        <location line="+2280"/>
        <source>Root</source>
        <translation>Rod</translation>
    </message>
    <message>
        <location line="-2226"/>
        <source>Push-to-Talk</source>
        <comment>Global Shortcut</comment>
        <translation>Tryk-for-snak</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Push and hold this button to send voice.</source>
        <comment>Global Shortcut</comment>
        <translation>Tryk og hold denne knap for at sende stemme.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This configures the push-to-talk button, and as long as you hold this button down, you will transmit voice.</source>
        <comment>Global Shortcut</comment>
        <translation>Dette konfigurerer tryk-for-snak knappen, og så længe du holder denne knap nede, vil du transmittere stemme.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Reset Audio Processor</source>
        <comment>Global Shortcut</comment>
        <translation>Nulstil Lyd Processor</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Unlink Plugin</source>
        <comment>Global Shortcut</comment>
        <translation>Unlink plugin</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Push-to-Mute</source>
        <comment>Global Shortcut</comment>
        <translation>Tryk-for-deaktivere-mikrofon</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Join Channel</source>
        <comment>Global Shortcut</comment>
        <translation>Gå ind i kanal</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Toggle Overlay</source>
        <comment>Global Shortcut</comment>
        <translation>Slå overlægning til/fra</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Toggle state of in-game overlay.</source>
        <comment>Global Shortcut</comment>
        <translation>Skift tilstand for overlægning i spillet.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Toggle Minimal</source>
        <comment>Global Shortcut</comment>
        <translation>Slå minimal tilstand til/fra</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Volume Up (+10%)</source>
        <comment>Global Shortcut</comment>
        <translation>Lydstyrke op (+10%)</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Volume Down (-10%)</source>
        <comment>Global Shortcut</comment>
        <translation>Lydstyrke ned (-10%)</translation>
    </message>
    <message>
        <location filename="MainWindow.ui"/>
        <source>Mumble</source>
        <translation>Mumble</translation>
    </message>
    <message>
        <location filename="MainWindow.cpp" line="+4"/>
        <location line="+19"/>
        <location line="+2372"/>
        <source>Mumble -- %1</source>
        <translation>Mumble -- %1</translation>
    </message>
    <message>
        <location line="-2367"/>
        <source>&amp;Window</source>
        <translation>&amp;Vindue</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+137"/>
        <source>Minimize</source>
        <translation>Minimér</translation>
    </message>
    <message>
        <location line="-137"/>
        <source>Ctrl+M</source>
        <translation>Ctrl+M</translation>
    </message>
    <message>
        <location line="+136"/>
        <source>Close</source>
        <translation>Luk</translation>
    </message>
    <message>
        <location line="-1"/>
        <source>Mumble is currently connected to a server. Do you want to Close or Minimize it?</source>
        <translation>Mumble har i øjeblikket forbindelse til en server. Vil du lukke eller minimere det?</translation>
    </message>
    <message>
        <location line="-197"/>
        <source>Mute Self</source>
        <comment>Global Shortcut</comment>
        <translation>Deaktivér din mikrofon</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Set self-mute status.</source>
        <comment>Global Shortcut</comment>
        <translation>Indstil din mikrofon on/off-status.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This will set or toggle your muted status. If you turn this off, you will also disable self-deafen.</source>
        <comment>Global Shortcut</comment>
        <translation>Dette vil indstille eller skifte din mikrofon on/off-status. Hvis du slår dette fra, vil du også aktivere din lyd igen.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deafen Self</source>
        <comment>Global Shortcut</comment>
        <translation>Deaktivér din lyd</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Set self-deafen status.</source>
        <comment>Global Shortcut</comment>
        <translation>Indstil din lyd on/off-status.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>This will set or toggle your deafened status. If you turn this on, you will also enable self-mute.</source>
        <comment>Global Shortcut</comment>
        <translation>Dette vil slå din mikrofon- og lydstatus til/fra. Hvis du slår dette til, vil du også deaktivere din mikrofon.</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Whisper/Shout</source>
        <oldsource>Whisper</oldsource>
        <translation>Hvisk/råb</translation>
    </message>
    <message>
        <location line="+67"/>
        <location line="+2411"/>
        <source>&lt;center&gt;Not connected&lt;/center&gt;</source>
        <oldsource>Not connected</oldsource>
        <translation>&lt;center&gt;Ingen forbindelse oprettet&lt;/center&gt;</translation>
    </message>
    <message>
        <location line="-2123"/>
        <source>Clear</source>
        <translation>Ryd</translation>
    </message>
    <message>
        <location line="+27"/>
        <source>Opening URL %1</source>
        <translation>Åbner URL %1</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>File does not exist</source>
        <translation>Filen eksisterer ikke</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>File is not a configuration file.</source>
        <translation>Filen er ikke en konfigurationsfil.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Settings merged from file.</source>
        <translation>Indstillinger fletted fra fil.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>URL scheme is not &apos;mumble&apos;</source>
        <translation>URL ordning er ikke &apos;mumble&apos;</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>This version of Mumble can&apos;t handle URLs for Mumble version %1.%2.%3</source>
        <translation>Denne version af Mumble kan ikke håndtere URLs for Mumble version %1.%2.%3</translation>
    </message>
    <message>
        <location line="+35"/>
        <source>Connecting to %1</source>
        <translation>Opretter forbindelse til %1</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Enter username</source>
        <translation>Skriv brugernavn</translation>
    </message>
    <message>
        <location line="+14"/>
        <location line="+197"/>
        <source>Connecting to server %1.</source>
        <translation>Opretter forbindelse til server %1.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Reconnecting.</source>
        <translation>Opretter forbindelse  igen.</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>Change your comment</source>
        <translation>Skift din kommentar</translation>
    </message>
    <message>
        <location line="+108"/>
        <source>&lt;p&gt;No build information or OS version available.&lt;/p&gt;</source>
        <translation>&lt;p&gt;Ingen build information eller OS version tilgængelig.&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>&lt;p&gt;%1 (%2)&lt;br /&gt;%3&lt;/p&gt;</source>
        <translation>&lt;p&gt;%1 (%2)&lt;br /&gt;%3&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+20"/>
        <source>&lt;h2&gt;Voice channel&lt;/h2&gt;&lt;p&gt;Encrypted with 128 bit OCB-AES128&lt;br /&gt;%1 ms average latency (%4 deviation)&lt;/p&gt;</source>
        <translation>&lt;h2&gt;Stemmekanal&lt;/h2&gt;&lt;p&gt;Krypteret med 128 bit OCB-AES128&lt;br /&gt;%1 ms gennemsnitlig forsinkelse (%4 afvigelse)&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="-104"/>
        <location line="+354"/>
        <source>Register yourself as %1</source>
        <translation>Registrér dig selv som %1</translation>
    </message>
    <message>
        <location line="-354"/>
        <location line="+354"/>
        <source>&lt;p&gt;You are about to register yourself on this server. This action cannot be undone, and your username cannot be changed once this is done. You will forever be known as &apos;%1&apos; on this server.&lt;/p&gt;&lt;p&gt;Are you sure you want to register yourself?&lt;/p&gt;</source>
        <translation>&lt;p&gt;Du er ved at registrere dig selv på denne server. Denne handling kan ikke fortrydes, og dit brugernavn kan ikke senere ændres. Du vil for altid være kendt som &apos;%1&apos; på denne server.&lt;/p&gt;&lt;p&gt;Er du sikker på du vil registrere dig selv?&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Register user %1</source>
        <translation>Registrér bruger %1</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>&lt;p&gt;You are about to register %1 on the server. This action cannot be undone, the username cannot be changed, and as a registered user, %1 will have access to the server even if you change the server password.&lt;/p&gt;&lt;p&gt;From this point on, %1 will be authenticated with the certificate currently in use.&lt;/p&gt;&lt;p&gt;Are you sure you want to register %1?&lt;/p&gt;</source>
        <translation>&lt;p&gt;Du er ved at registrere &apos;%1&apos; på serveren. Denne handling kan ikke fortrydes, brugernavnet kan ikke ændres, og som en registreret bruger vil &apos;%1&apos; have adgang til serveren, selvom du skifter adgangskoden til serveren.&lt;/p&gt;&lt;p&gt;%1 vil blive autentificeret med certifikatet, der i øjeblikket er i brug.&lt;/p&gt;&lt;p&gt;Er du sikker på du vil registrere &apos;%1&apos;?&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+40"/>
        <source>Kicking user %1</source>
        <translation>Kicker bruger %1</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Banning user %1</source>
        <translation>Bandlyser brugeren %1</translation>
    </message>
    <message>
        <location line="+117"/>
        <location line="+263"/>
        <source>Message to channel %1</source>
        <translation>Besked til kanal %1</translation>
    </message>
    <message>
        <location line="+623"/>
        <source>Connected.</source>
        <translation>Forbindelse oprettet.</translation>
    </message>
    <message>
        <location line="+159"/>
        <source>SSL Version mismatch</source>
        <translation>SSL-version uoverenstemmelse</translation>
    </message>
    <message>
        <location line="+153"/>
        <source>&lt;center&gt;Type message to channel &apos;%1&apos; here&lt;/center&gt;</source>
        <oldsource>Type message to channel &apos;%1&apos; here</oldsource>
        <translation>&lt;center&gt;Skriv besked til kanalen &apos;%1&apos; hér&lt;/center&gt;</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>&lt;center&gt;Type message to user &apos;%1&apos; here&lt;/center&gt;</source>
        <oldsource>Type message to user &apos;%1&apos; here</oldsource>
        <translation>&lt;center&gt;Skriv besked til brugeren &apos;%1&apos; hér&lt;/center&gt;</translation>
    </message>
    <message>
        <location line="+122"/>
        <source>Choose image file</source>
        <translation>Vælg billedfil</translation>
    </message>
    <message>
        <location line="+7"/>
        <location line="+17"/>
        <source>Failed to load image</source>
        <translation>Indlæsning af billede mislykkedes</translation>
    </message>
    <message>
        <location line="-17"/>
        <source>Could not open file for reading.</source>
        <translation>Kunne ikke åbne filen for læsning.</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Image format not recognized.</source>
        <translation>Billedformatet blev ikke genkendt.</translation>
    </message>
    <message>
        <location line="-1777"/>
        <source>Voice channel is sent over control channel.</source>
        <translation>Lydkanal er sendt over kontrolkanal.</translation>
    </message>
    <message>
        <location line="-872"/>
        <source>This will switch the states of the in-game overlay.</source>
        <comment>Global Shortcut</comment>
        <translation>Dette vil skifte tilstanden for overlægningen i spillet.</translation>
    </message>
    <message>
        <location line="+19"/>
        <source>Link Channel</source>
        <comment>Global Shortcut</comment>
        <translation>Sammenkæd kanal</translation>
    </message>
    <message>
        <location line="+830"/>
        <source>&lt;h2&gt;Version&lt;/h2&gt;&lt;p&gt;Protocol %1.&lt;/p&gt;</source>
        <translation>&lt;h2&gt;Version&lt;/h2&gt;&lt;p&gt;Protocol %1.&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>&lt;h2&gt;Control channel&lt;/h2&gt;&lt;p&gt;Encrypted with %1 bit %2&lt;br /&gt;%3 ms average latency (%4 deviation)&lt;/p&gt;&lt;p&gt;Remote host %5 (port %6)&lt;/p&gt;</source>
        <translation>&lt;h2&gt;Kontrol kanal&lt;/h2&gt;&lt;p&gt;Krypteret med %1 bit %2&lt;br /&gt;%3 ms gennemsnitlig forsinkelse (%4 afvigelse)&lt;/p&gt;&lt;p&gt;Ekstern vært %5 (port %6)&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+18"/>
        <source>UDP Statistics</source>
        <translation>UDP-statistikker</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>To Server</source>
        <translation>Til server</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>From Server</source>
        <translation>Fra server</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Good</source>
        <translation>Gode</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Late</source>
        <translation>Forsinkede</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Lost</source>
        <translation>Tabte</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Resync</source>
        <translation>Gensynkroniseret</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Mumble Server Information</source>
        <translation>Mumble serverinformation</translation>
    </message>
    <message>
        <location line="+4"/>
        <location line="+1439"/>
        <source>&amp;View Certificate</source>
        <translation>&amp;Se certifikat</translation>
    </message>
    <message>
        <location line="-1164"/>
        <location line="+19"/>
        <source>Enter reason</source>
        <translation>Skriv begrundelse</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Sending message to %1</source>
        <translation>Sender besked til %1</translation>
    </message>
    <message>
        <location line="+12"/>
        <location line="+83"/>
        <location line="+4"/>
        <location line="+259"/>
        <source>To %1: %2</source>
        <translation>Til %1: %2</translation>
    </message>
    <message>
        <location line="-346"/>
        <location line="+87"/>
        <source>Message to %1</source>
        <translation>Besked til %1</translation>
    </message>
    <message>
        <location line="-60"/>
        <source>View comment on user %1</source>
        <translation>Vis kommentar på bruger %1</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>Are you sure you want to reset the comment of user %1?</source>
        <translation>Er du sikker på, at du vil nulstille kommentaren for brugeren %1?</translation>
    </message>
    <message>
        <location line="+221"/>
        <source>Are you sure you want to delete %1 and all its sub-channels?</source>
        <translation>Er du sikker på, at du vil slette %1 og alle dens underkanaler?</translation>
    </message>
    <message>
        <location line="+71"/>
        <source>Sending message to channel %1</source>
        <translation>Sender besked til kanalen %1</translation>
    </message>
    <message>
        <location line="+793"/>
        <source>This server is using an older encryption standard, and is no longer supported by modern versions of Mumble.</source>
        <translation>Denne server bruger en ældre krypteringsstandard og er ikke længere understøttet af nyere versioner af Mumble.</translation>
    </message>
    <message>
        <location line="-784"/>
        <source>Message to tree %1</source>
        <translation>Besked til træet %1</translation>
    </message>
    <message>
        <location line="-1568"/>
        <location line="+26"/>
        <source>Use in conjunction with Whisper to.</source>
        <comment>Global Shortcut</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Cycle Transmit Mode</source>
        <comment>Global Shortcut</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+154"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+708"/>
        <source>&lt;h2&gt;Audio bandwidth&lt;/h2&gt;&lt;p&gt;Maximum %1 kbit/s&lt;br /&gt;Current %2 kbit/s&lt;br /&gt;Codec: %3&lt;/p&gt;</source>
        <translation>&lt;h2&gt;Lydbåndbredde&lt;/h2&gt;&lt;p&gt;Maksimum %1 kbit/s&lt;br /&gt;Nuværende %2 kbit/s&lt;br /&gt;Codec: %3&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+678"/>
        <source>To %1 (Tree): %2</source>
        <oldsource>(Tree) %1: %2</oldsource>
        <translation>Til %1 (træ): %2</translation>
    </message>
    <message>
        <location line="+163"/>
        <source>Unmuted and undeafened.</source>
        <translation>Mikrofon og lyd aktiveret.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Unmuted.</source>
        <translation>Mikrofon aktiveret.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Muted.</source>
        <translation>Mikrofon deaktiveret.</translation>
    </message>
    <message>
        <location line="+31"/>
        <source>Muted and deafened.</source>
        <translation>Mikrofon og lyd deaktiveret.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deafened.</source>
        <translation>Lyd deaktiveret.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Undeafened.</source>
        <translation>Lyd aktiveret.</translation>
    </message>
    <message>
        <location line="+92"/>
        <source>About Qt</source>
        <translation>Om Qt</translation>
    </message>
    <message>
        <location line="+279"/>
        <source>Cycled Transmit Mode to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+172"/>
        <source>SSL Verification failed: %1</source>
        <translation>SSL-verificering mislykkedes: %1</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>&lt;b&gt;WARNING:&lt;/b&gt; The server presented a certificate that was different from the stored one.</source>
        <translation>&lt;b&gt;ADVARSEL:&lt;/b&gt; Serveren forelagde et certifikat, der var forskellig fra det, du i forvejen har gemt.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Sever presented a certificate which failed verification.</source>
        <translation>Serveren forelagde et certifikat som mislykkedes verificering.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>&lt;p&gt;%1.&lt;br /&gt;The specific errors with this certificate are: &lt;/p&gt;&lt;ol&gt;%2&lt;/ol&gt;&lt;p&gt;Do you wish to accept this certificate anyway?&lt;br /&gt;(It will also be stored so you won&apos;t be asked this again.)&lt;/p&gt;</source>
        <translation>&lt;p&gt;%1.&lt;br /&gt;Den specifikke fejl med dette certifikat er: &lt;/p&gt;&lt;ol&gt;%2&lt;/ol&gt;&lt;p&gt;Vil du acceptere certifikatet alligevel?&lt;br /&gt;(Det vil blive gemt, så du ikke bliver spurgt igen.)&lt;/p&gt;</translation>
    </message>
    <message>
        <location line="+30"/>
        <source>Server connection failed: %1.</source>
        <translation>Serverforbindelse fejlede: %1.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Disconnected from server.</source>
        <translation>Forbindelse til server afbrudt.</translation>
    </message>
    <message>
        <location line="+11"/>
        <location filename="Messages.cpp" line="+95"/>
        <source>Invalid username</source>
        <translation>Ugyldigt brugernavn</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>You connected with an invalid username, please try another one.</source>
        <translation>Du oprettede forbindelse med et ugyldigt brugernavn. Prøv venligst et andet.</translation>
    </message>
    <message>
        <location line="+4"/>
        <location filename="Messages.cpp" line="+3"/>
        <source>Username in use</source>
        <translation>Brugernavn er i brug</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>That username is already in use, please try another username.</source>
        <translation>Dét brugernavn er allerede i brug, prøv venligst et andet brugernavn.</translation>
    </message>
    <message>
        <location line="+5"/>
        <location filename="Messages.cpp" line="+3"/>
        <source>Wrong certificate or password</source>
        <translation>Forkert certifikat eller adgangskode</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wrong certificate or password for registered user. If you are
certain this user is protected by a password please retry.
Otherwise abort and check your certificate and username.</source>
        <translation>Forkert certifikat eller adgangskode for registreret bruger. Hvis du er sikker på, at denne bruger er beskyttet af en adgangskode, prøv venligst igen.</translation>
    </message>
    <message>
        <location line="+7"/>
        <location filename="Messages.cpp" line="+3"/>
        <source>Wrong password</source>
        <translation>Forkert adgangskode</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Wrong server password for unregistered user account, please try again.</source>
        <translation>Forkert serveradgangskode for uregistreret brugerkonto, prøv venligst igen.</translation>
    </message>
    <message>
        <location line="+239"/>
        <source>Images (*.png *.jpg *.jpeg *.svg)</source>
        <translation>Billeder (*.png *.jpg *.jpeg *.svg)</translation>
    </message>
    <message>
        <location line="-2689"/>
        <source>&amp;Channel</source>
        <translation>&amp;Kanal</translation>
    </message>
    <message>
        <location filename="MainWindow.ui"/>
        <source>C&amp;onfigure</source>
        <translation>K&amp;onfigurér</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Help</source>
        <translation>&amp;Hjælp</translation>
    </message>
    <message>
        <location/>
        <source>Log</source>
        <translation>Log</translation>
    </message>
    <message>
        <location/>
        <source>This shows all recent activity. Connecting to servers, errors and information messages all show up here.&lt;br /&gt;To configure exactly which messages show up here, use the &lt;b&gt;Settings&lt;/b&gt; command from the menu.</source>
        <translation>Dette viser alle seneste aktiviter. Oprettelse af forbindelse til serveren, fejl og informationbeskeder vises alle hér.&lt;br /&gt;For at konfigurere præcis hvilke beskeder der vises her, skal du gå ind under &lt;b&gt;Indstillinger&lt;/b&gt; som du finder i menuen.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Quit Mumble</source>
        <translation>&amp;Afslut Mumble</translation>
    </message>
    <message>
        <location/>
        <source>Closes the program</source>
        <translation>Lukker programmet</translation>
    </message>
    <message>
        <location/>
        <source>Exits the application.</source>
        <translation>Går ud af programmet.</translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+Q</source>
        <translation>CTRL+Q</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Connect</source>
        <translation>&amp;Opret forbindelse</translation>
    </message>
    <message>
        <location/>
        <source>Open the server connection dialog</source>
        <translation>Åben serverforbindelse-dialogen</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Disconnect</source>
        <translation>&amp;Afbryd forbindelse</translation>
    </message>
    <message>
        <location/>
        <source>Disconnect from server</source>
        <translation>Afbryd forbindelse til server</translation>
    </message>
    <message>
        <location/>
        <source>Disconnects you from the server.</source>
        <translation>Afbryder din forbindelse til serveren.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Information</source>
        <translation>&amp;Information</translation>
    </message>
    <message>
        <location/>
        <source>Show information about the server connection</source>
        <translation>Viser information om serverforbindelsen</translation>
    </message>
    <message>
        <location/>
        <source>This will show extended information about the connection to the server.</source>
        <translation>Dette vil vise udvidet information om forbindelsen til serveren.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Kick</source>
        <translation>&amp;Kick</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Mute</source>
        <translation>&amp;Deaktivér mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Ban</source>
        <translation>&amp;Bandlys</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Deafen</source>
        <translation>&amp;Deaktivér lyd</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Local Mute</source>
        <translation>&amp;Deaktivér mikrofon lokalt</translation>
    </message>
    <message>
        <location/>
        <source>Send a Text Message</source>
        <translation>Send en tekstbesked</translation>
    </message>
    <message>
        <location/>
        <source>Sends a text message to another user.</source>
        <translation>Sender en tekstbesked til en anden bruger.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Add</source>
        <translation>&amp;Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Add new channel</source>
        <translation>Tilføj ny kanal</translation>
    </message>
    <message>
        <location/>
        <source>This adds a new sub-channel to the currently selected channel.</source>
        <translation>Dette tilføjer en ny underkanal til den nuværende valgte kanal.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove</source>
        <translation>&amp;Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Remove channel</source>
        <translation>Fjern kanal</translation>
    </message>
    <message>
        <location/>
        <source>This removes a channel and all sub-channels.</source>
        <translation>Dette fjerner en kanal og alle underkanaler.</translation>
    </message>
    <message>
        <location/>
        <source>Edit Groups and ACL for channel</source>
        <translation>Redigér grupper og ACL for kanal</translation>
    </message>
    <message>
        <location/>
        <source>This opens the Group and ACL dialog for the channel, to control permissions.</source>
        <translation>Dette åbner dialogboksen med grupper og ACL for denne kanal, så du kan kontrollere rettigheder.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Link</source>
        <translation>&amp;Sammenkæd</translation>
    </message>
    <message>
        <location/>
        <source>Link your channel to another channel</source>
        <translation>Sammenkæd din kanal med en anden kanal</translation>
    </message>
    <message>
        <location filename="MainWindow.cpp" line="-1"/>
        <source>&amp;User</source>
        <translation>&amp;Bruger</translation>
    </message>
    <message>
        <location filename="MainWindow.ui"/>
        <source>This is the chatbar&lt;br /&gt;If you enter text here and then press enter the text is sent to the user or channel that was selected. If nothing is selected the message is sent to your current channel.</source>
        <translation>Dette er chatbaren&lt;br /&gt;Hvis du skriver tekst hér og trykker enter, vil teksten blive sendt til brugeren eller kanalen som du har valgt. Hvis ingenting er valgt, vil beskeden blive sendt til din nuværende kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Chatbar</source>
        <translation>Chatbar</translation>
    </message>
    <message>
        <location/>
        <source>Shows a dialog of registered servers, and also allows quick-connect.</source>
        <translation>Viser en dialogboks med registrerede servere, og giver også mulighed for lynforbindelse.</translation>
    </message>
    <message>
        <location/>
        <source>Kick user (with reason)</source>
        <translation>Kick bruger (med begrundelse)</translation>
    </message>
    <message>
        <location/>
        <source>Kick selected user off server. You&apos;ll be asked to specify a reason.</source>
        <translation>Kick valgte bruger fra server. Du vil blive bedt om at angive en grund.</translation>
    </message>
    <message>
        <location/>
        <source>Mute user</source>
        <translation>Deaktivér brugers mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>Mute or unmute user on server. Unmuting a deafened user will also undeafen them.</source>
        <translation>Aktivér eller deaktivér en brugers mikrofon på serveren. Aktivering af en brugers mikrofon, vil også aktivere brugerens lyd.</translation>
    </message>
    <message>
        <location/>
        <source>Kick and ban user (with reason)</source>
        <translation>Kick og bandlys bruger (med begrundelse)</translation>
    </message>
    <message>
        <location/>
        <source>Kick and ban selected user from server. You&apos;ll be asked to specify a reason.</source>
        <translation>Kick og bandlys den valgte bruger fra serveren. Du vil blive bedt om at angive en begrundelse.</translation>
    </message>
    <message>
        <location/>
        <source>Deafen user</source>
        <translation>Deaktivér brugers lyd</translation>
    </message>
    <message>
        <location/>
        <source>Deafen or undeafen user on server. Deafening a user will also mute them.</source>
        <translation>Aktivér eller deaktivér en brugers mikrofon og lyd på serveren. Deaktivering af en brugers lyd, vil også deaktivere brugerens mikrofon.</translation>
    </message>
    <message>
        <location/>
        <source>Mute user locally</source>
        <translation>Deaktivér brugeren mikrofon lokalt</translation>
    </message>
    <message>
        <location/>
        <source>Mute or unmute user locally. Use this on other users in the same room.</source>
        <translation>Aktivér eller deaktivér en brugers mikrofon lokalt. Brug denne på andre brugere i det samme rum.</translation>
    </message>
    <message>
        <location/>
        <source>Send &amp;Message</source>
        <translation>Send &amp;besked</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Edit</source>
        <translation>&amp;Redigér</translation>
    </message>
    <message>
        <location/>
        <source>This links your current channel to the selected channel. If users in a channel have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.</source>
        <oldsource>This links your current channel to the selected channel. If they have permission to speak in the other channel, users can now hear each other. This is a permanent link, and will last until manually unlinked or the server is restarted. Please see the shortcuts for push-to-link.</oldsource>
        <translation>Dette sammenkæder din nuværende kanal med den valgte kanal. Hvis brugere i en kanal har rettighedder til at snakke i den anden kanal, kan brugerne nu høre hinanden. Dette er en permanent sammenkædning, som vil vare indtil sammenkædningen fjernes manuelt eller serveren genstartes. Du kan kigge under genveje for at finde &lt;i&gt;Tryk-for-sammenkædning&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Unlink</source>
        <comment>Channel</comment>
        <translation>&amp;Fjern sammenkædning</translation>
    </message>
    <message>
        <location/>
        <source>Unlink your channel from another channel</source>
        <translation>Fjern sammenkædningen af din kanal med en anden kanal</translation>
    </message>
    <message>
        <location/>
        <source>This unlinks your current channel from the selected channel.</source>
        <translation>Fjerner sammenkædningen mellem din nuværende kanal og den valgte kanal.</translation>
    </message>
    <message>
        <location/>
        <source>Unlinks your channel from all linked channels.</source>
        <translation>Fjerner sammenkædningen af alle de kanaler, som din kanal er sammenkædet med.</translation>
    </message>
    <message>
        <location/>
        <source>This unlinks your current channel (not the selected one) from all linked channels.</source>
        <translation>Dette fjerner sammenkædning fra din kanal (ikke den valgte) til alle andre kanaler.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Reset</source>
        <translation>&amp;Nulstil</translation>
    </message>
    <message>
        <location/>
        <source>Reset audio preprocessor</source>
        <translation>Nulstil lyd-forudbearbejdning</translation>
    </message>
    <message>
        <location/>
        <source>This will reset the audio preprocessor, including noise cancellation, automatic gain and voice activity detection. If something suddenly worsens the audio environment (like dropping the microphone) and it was temporary, use this to avoid having to wait for the preprocessor to readjust.</source>
        <translation>Dette vil nulstille lydforudbehandlingen. Herunder støjedæmpning automatisk stemmeaktivitet. Hvis noget pludselig forværrer lydmiljøet (fx dropper mikrofonen) og det er midlertidigt, brug denne til at undgå, at skulle vente på at forudbehandlingen justerer.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Mute Self</source>
        <translation>&amp;Deaktivér din mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>Mute yourself</source>
        <translation>Deaktivér din mikrofon</translation>
    </message>
    <message>
        <location/>
        <source>Mute or unmute yourself. When muted, you will not send any data to the server. Unmuting while deafened will also undeafen.</source>
        <translation>Aktivér eller deaktivér din mikrofon. Hvis din mikrofon er deaktiveret, vil der ikke sendes nogen data til serveren. Aktivering af mikrofon, når lyd er deaktiveret, vil også aktivere lyd.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Deafen Self</source>
        <translation>&amp;Deaktivér din lyd</translation>
    </message>
    <message>
        <location/>
        <source>Deafen yourself</source>
        <translation>Deaktivér din lyd</translation>
    </message>
    <message>
        <location/>
        <source>Deafen or undeafen yourself. When deafened, you will not hear anything. Deafening yourself will also mute.</source>
        <translation>Aktivér eller deaktivér din mikrofon og lyd. Når din mikrofon og lyd er deaktiveret, vil du ikke høre noget. Hvis du deaktiverer din lyd, vil dette også deaktivere din mikrofon.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Text-To-Speech</source>
        <translation>&amp;Tekst-til-tale</translation>
    </message>
    <message>
        <location/>
        <source>Toggle Text-To-Speech</source>
        <translation>Slå Tekst-til-tale til/fra</translation>
    </message>
    <message>
        <location/>
        <source>Enable or disable the text-to-speech engine. Only messages enabled for TTS in the Configuration dialog will actually be spoken.</source>
        <translation>Aktivér eller deaktivér Tekst-til-tale. Kun beskedtyper der er aktiveret for Tekst-til-tale under konfiguration, vil blive læst højt.</translation>
    </message>
    <message>
        <location/>
        <source>Display audio statistics</source>
        <translation>Vis lydstatistikker</translation>
    </message>
    <message>
        <location/>
        <source>Pops up a small dialog with information about your current audio input.</source>
        <translation>Åbner en lille dialogboks med information om din nuværende lydindspilning.</translation>
    </message>
    <message>
        <location/>
        <source>Forcibly unlink plugin</source>
        <translation>Tving unlink af plugin</translation>
    </message>
    <message>
        <location/>
        <source>This forces the current plugin to unlink, which is handy if it is reading completely wrong data.</source>
        <translation>Dette tvinger det nuværende plugin til at unlink, som er praktisk hvis læser totalt forkerte data.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Settings</source>
        <translation>&amp;Indstillinger</translation>
    </message>
    <message>
        <location/>
        <source>Configure Mumble</source>
        <translation>Konfigurér Mumble</translation>
    </message>
    <message>
        <location/>
        <source>Allows you to change most settings for Mumble.</source>
        <translation>Gør dig i stand til at ændre de flere indstillinger i Mumble.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Audio Wizard</source>
        <translation>&amp;Lydguide</translation>
    </message>
    <message>
        <location/>
        <source>Start the audio configuration wizard</source>
        <translation>Start lydkonfigurations-guiden</translation>
    </message>
    <message>
        <location/>
        <source>This will guide you through the process of configuring your audio hardware.</source>
        <translation>Dette vil guide dig gennem processen, hvor du kan konfigurere din lydhardware.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;What&apos;s This?</source>
        <translation>&amp;Hvad er dette?</translation>
    </message>
    <message>
        <location/>
        <source>Enter What&apos;s This? mode</source>
        <translation>Gå ind i &lt;i&gt;Hvad er dette?&lt;/i&gt;-tilstand</translation>
    </message>
    <message>
        <location/>
        <source>Click this to enter &quot;What&apos;s This?&quot; mode. Your cursor will turn into a question mark. Click on any button, menu choice or area to show a description of what it is.</source>
        <translation>Klik hér for at gå ind i &quot;Hvad er dette?&quot;-tilstand. Din markør vil skifte til et spørgsmåltegn. Klik på enhver knap, et menupunkt eller et område for at vise en beskrivelse af &lt;i&gt;hvad det er&lt;/i&gt;.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;About</source>
        <translation>&amp;Om</translation>
    </message>
    <message>
        <location/>
        <source>Information about Mumble</source>
        <translation>Information om Mumble</translation>
    </message>
    <message>
        <location/>
        <source>Shows a small dialog with information and license for Mumble.</source>
        <translation>Viser en lille dialogboks med information om licens for Mumble.</translation>
    </message>
    <message>
        <location/>
        <source>About &amp;Speex</source>
        <translation>Om &amp;Speex</translation>
    </message>
    <message>
        <location/>
        <source>Information about Speex</source>
        <translation>Information om Speex</translation>
    </message>
    <message>
        <location/>
        <source>Shows a small dialog with information about Speex.</source>
        <translation>Viser en lille dialogboks med information om Speex.</translation>
    </message>
    <message>
        <location/>
        <source>About &amp;Qt</source>
        <translation>Om &amp;Qt</translation>
    </message>
    <message>
        <location/>
        <source>Information about Qt</source>
        <translation>Information om Qt</translation>
    </message>
    <message>
        <location/>
        <source>Shows a small dialog with information about Qt.</source>
        <translation>Viser en lille dialogboks med information om Qt.</translation>
    </message>
    <message>
        <location/>
        <source>Check for &amp;Updates</source>
        <translation>Tjek for &amp;opdateringer</translation>
    </message>
    <message>
        <location/>
        <source>Check for new version of Mumble</source>
        <translation>Tjek for ny version af Mumble</translation>
    </message>
    <message>
        <location/>
        <source>Connects to the Mumble webpage to check if a new version is available, and notifies you with an appropriate download URL if this is the case.</source>
        <translation>Opretter forbindelse til Mumble-webstedet for at tjekke om der er en ny version tilgængelig, og informerer dig med en relevant download-URL hvis dette er tilfældet.</translation>
    </message>
    <message>
        <location/>
        <source>Sends a text message to all users in a channel.</source>
        <translation>Sender en tekstbesked til alle brugere i en kanal.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Change Comment</source>
        <translation>&amp;Skift kommentar</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Certificate Wizard</source>
        <translation>&amp;Certifikatguide</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Register</source>
        <translation>&amp;Registrér</translation>
    </message>
    <message>
        <location/>
        <source>Reset &amp;Comment</source>
        <translation>Fjern &amp;kommentar</translation>
    </message>
    <message>
        <location/>
        <source>Reset the comment of the selected user.</source>
        <translation>Fjern kommentaren for den valgte bruger.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Join Channel</source>
        <translation>&amp;Gå ind i kanal</translation>
    </message>
    <message>
        <location/>
        <source>Configure certificates for strong authentication</source>
        <translation>Konfigurér certifikater for stærk autentificering</translation>
    </message>
    <message>
        <location/>
        <source>This starts the wizard for creating, importing and exporting certificates for authentication against servers.</source>
        <translation>Dette starter guiden, der kan bruges til at oprette, importere og eksportere certifikater til stærk autentificering på servere.</translation>
    </message>
    <message>
        <location/>
        <source>Register user on server</source>
        <translation>Registrér bruger på server</translation>
    </message>
    <message>
        <location/>
        <source>This will permanently register the user on the server.</source>
        <translation>Dette vil permanent registere brugeren på serveren.</translation>
    </message>
    <message>
        <location/>
        <source>Add &amp;Friend</source>
        <translation>Tilføj som &amp;ven</translation>
    </message>
    <message>
        <location/>
        <source>Adds a user as your friend.</source>
        <translation>Tilføj en bruger som din ven.</translation>
    </message>
    <message>
        <location/>
        <source>This will add the user as a friend, so you can recognize him on this and other servers.</source>
        <translation>Dette vil tilføje brugeren som en ven, så du kan genkende brugeren på denne og andre servere.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove Friend</source>
        <translation>&amp;Fjern som ven</translation>
    </message>
    <message>
        <location/>
        <source>Removes a user from your friends.</source>
        <translation>Fjerner en bruger som din ven.</translation>
    </message>
    <message>
        <location/>
        <source>This will remove a user from your friends list.</source>
        <translation>Dette vil fjerne en bruger fra din venneliste.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Update Friend</source>
        <translation>&amp;Opdatér ven</translation>
    </message>
    <message>
        <location/>
        <source>Update name of your friend.</source>
        <translation>Opdater navn på din ven.</translation>
    </message>
    <message>
        <location/>
        <source>Your friend uses a different name than what is in your database. This will update the name.</source>
        <translation>Din ven bruger et andet navn, end det som er i din database. Dette vil opdatere navnet.</translation>
    </message>
    <message>
        <location/>
        <source>Registered &amp;Users</source>
        <translation>Registrerede &amp;brugere</translation>
    </message>
    <message>
        <location/>
        <source>Edit registered users list</source>
        <translation>Redigér listen over registrerede brugere</translation>
    </message>
    <message>
        <location/>
        <source>This opens the editor for registered users, which allow you to change their name or unregister them.</source>
        <translation>Dette åbner editoren for registrerede brugere, som gør dig i stand til at skifte deres navn eller fjerne deres registration.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Access Tokens</source>
        <translation>&amp;Adgangsudtryk</translation>
    </message>
    <message>
        <location/>
        <source>Add or remove text-based access tokens</source>
        <translation>Tilføj eller fjer tekstbaserede adgangsudtryk</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Minimal View</source>
        <translation>&amp;Minimal visning</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Unlink All</source>
        <translation>&amp;Fjern alle sammenkædninger</translation>
    </message>
    <message>
        <location/>
        <source>Toggle minimal window modes</source>
        <translation>Slå minimal tilstand til/fra</translation>
    </message>
    <message>
        <location/>
        <source>This will toggle minimal mode, where the log window and menu is hidden.</source>
        <translation>Dette vil slå minimal tilstand til/fra, hvor log-vinduet og menuen er skjult.</translation>
    </message>
    <message>
        <location filename="Messages.cpp" line="+278"/>
        <source>You muted and deafened %1.</source>
        <translation>Du deaktiverede mikrofon og lyd for %1.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>You unmuted and undeafened %1.</source>
        <translation>Du aktiverede mikrofon og lyd for %1.</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>You undeafened %1.</source>
        <translation>Du aktiverede lyd for %1.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>You suppressed %1.</source>
        <translation>Du deaktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>%1 muted and deafened by %2.</source>
        <translation>%2 deaktiverede mikrofon og lyd for %1.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 unmuted and undeafened by %2.</source>
        <translation>%2 aktiverede mikrofon og lyd for %1.</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>%1 undeafened by %2.</source>
        <translation>%2 aktiverede lyd for %1.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>%1 suppressed by %2.</source>
        <translation>%2 deaktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>%1 moved to %2.</source>
        <translation>%1 flyttet til %2.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 moved to %2 by %3.</source>
        <translation>%1 flyttet til %2 af %3.</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>%1 moved in from %2 by %3.</source>
        <translation>%1 flyttet ind fra %2 af %3.</translation>
    </message>
    <message>
        <location line="-161"/>
        <source>%1 is now muted and deafened.</source>
        <translation>%1 har nu deaktiveret mikrofon og lyd.</translation>
    </message>
    <message>
        <location line="-117"/>
        <source>You were denied %1 privileges in %2.</source>
        <translation>Du blev nægtet &lt;i&gt;%1&lt;/i&gt;-privilegier i %2.</translation>
    </message>
    <message>
        <location line="-69"/>
        <location line="+48"/>
        <source>Welcome message: %1</source>
        <translation>Velkomstbesked: %1</translation>
    </message>
    <message>
        <location line="-64"/>
        <source>Your account information can not be verified currently. Please try again later</source>
        <translation>Din kontoinformation kan i øjeblikket ikke verificeres. Prøv igen senere</translation>
    </message>
    <message>
        <location line="+49"/>
        <source>Mumble: %1</source>
        <translation>Mumble: %1</translation>
    </message>
    <message>
        <location line="+38"/>
        <source>%3 was denied %1 privileges in %2.</source>
        <translation>%3 blev nægtet %1-privilegier i %2.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Denied: Cannot modify SuperUser.</source>
        <translation>Nægtet: Kan ikke modificere SuperUser.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Denied: Invalid channel name.</source>
        <translation>Nægtet: Ugyldigt kanalnavn.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Denied: Text message too long.</source>
        <translation>Nægtet: Tekstbesked for lang.</translation>
    </message>
    <message>
        <location line="+22"/>
        <source>Denied: Operation not permitted in temporary channel.</source>
        <translation>Nægtet: Handling ikke tilladt i midlertidig kanal.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>You need a certificate to perform this operation.</source>
        <translation>Du skal bruge et certifikat for at gøre dette.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 does not have a certificate.</source>
        <translation>%1 har ikke et certifikat.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Invalid username: %1.</source>
        <translation>Ugyldigt brugernavn: %1.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Invalid username.</source>
        <translation>Ugyldigt brugernavn.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Channel is full.</source>
        <translation>Kanalen er fuld.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Channel nesting limit reached.</source>
        <translatorcomment>Alternative: Grænsen for kanalens parentesstruktur er opnået.</translatorcomment>
        <translation>Udbygningsgrænsen for kanalen opnået.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Permission denied.</source>
        <translation>Tilladelser nægtet.</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>%1 connected.</source>
        <translation>%1 oprettede forbindelse.</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>%1 is now muted.</source>
        <translation>%1 har deaktiveret mikrofon og lyd.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 is now unmuted.</source>
        <translation>%1 har nu aktiveret mikrofon.</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Recording started</source>
        <translation>Optagelse startet</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Recording stopped</source>
        <translation>Optagelse stoppet</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>%1 started recording.</source>
        <translation>%1 startede optagelse.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 stopped recording.</source>
        <translation>%1 stoppede optagelse.</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>You were unmuted and undeafened by %1.</source>
        <translation>%1 aktiverede din mikrofon og lyd.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>You were muted by %1.</source>
        <translation>%1 deaktiverede din mikrofon og lyd.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>You were undeafened by %1.</source>
        <translation>%1 aktiverede din lyd.</translation>
    </message>
    <message>
        <location line="+156"/>
        <source>%1 left channel.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+321"/>
        <source>The server requests minimum client version %1</source>
        <translation>Serveren kræver minimum klientversion %1</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>The server requests positional audio be enabled.</source>
        <translation>Serveren kræver, at placeringsbestemt lyd er aktiveret.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>The server requests positional audio be disabled.</source>
        <translation>Serveren kræver, at placeringsbestemt lyd er deaktiveret.</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>The server requests Push-to-Talk be enabled.</source>
        <translation>Serveren kræver, at tryk-for-snak er aktiveret.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>The server requests Push-to-Talk be disabled.</source>
        <translation>Serveren kræver, at tryk-for-snak er deaktiveret.</translation>
    </message>
    <message>
        <location line="-478"/>
        <source>You were unsuppressed by %1.</source>
        <translation>%1 aktiverede din mikrofon.</translation>
    </message>
    <message>
        <location line="+98"/>
        <source>%1 is recording</source>
        <translation>%1 optager</translation>
    </message>
    <message>
        <location line="+48"/>
        <source>%1 disconnected.</source>
        <translation>%1 afbrød forbindelsen.</translation>
    </message>
    <message>
        <location line="+110"/>
        <location line="+1"/>
        <source>Server</source>
        <comment>message from</comment>
        <translation>server</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>(Tree) </source>
        <translation>(Træ) </translation>
    </message>
    <message>
        <location line="+2"/>
        <source>(Channel) </source>
        <translation>(Kanal) </translation>
    </message>
    <message>
        <location line="+3"/>
        <source>%2%1: %3</source>
        <translation>%2%1: %3</translation>
    </message>
    <message>
        <location line="-281"/>
        <source>You were unmuted by %1.</source>
        <translation>%1 aktiverede din mikrofon.</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>You were suppressed.</source>
        <translation>Din mikrofon blev deaktiveret.</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>You were unsuppressed.</source>
        <translation>Din mikrofon blev aktiveret.</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>You muted %1.</source>
        <translation>Du deaktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>You unsuppressed %1.</source>
        <translation>Du aktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="-14"/>
        <source>You unmuted %1.</source>
        <translation>Du aktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+25"/>
        <source>%1 muted by %2.</source>
        <translation>%2 deaktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+16"/>
        <source>%1 unsuppressed by %2.</source>
        <translation>%2 aktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="-14"/>
        <source>%1 unmuted by %2.</source>
        <translation>%2 aktiverede mikrofon for %1.</translation>
    </message>
    <message>
        <location line="+397"/>
        <source>Unable to find matching CELT codecs with other clients. You will not be able to talk to all users.</source>
        <translation>Kunne ikke finde matchende CELT-codecs host andre klienter. Du vil ikke være i stand til at snakke med alle brugere.</translation>
    </message>
    <message>
        <location line="-463"/>
        <source>You were muted and deafened by %1.</source>
        <oldsource>You were deafened by %1.</oldsource>
        <translation>%1 deaktiverede din mikrofon og lyd.</translation>
    </message>
    <message>
        <location line="+161"/>
        <source>You were kicked from the server by %1: %2.</source>
        <translation>Du blev kicked fra serveren af %1: %2.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>%3 was kicked from the server by %1: %2.</source>
        <translation>%3 blev kicked fra serveren af %1: %2.</translation>
    </message>
    <message>
        <location line="-7"/>
        <source>You were kicked and banned from the server by %1: %2.</source>
        <translation>Du blev kicked og bandlyst fra serveren af %1: %2.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>%3 was kicked and banned from the server by %1: %2.</source>
        <translation>%3 blev kicked og bandlyst fra serveren af %1: %2.</translation>
    </message>
    <message>
        <location line="-64"/>
        <source>You were moved to %1 by %2.</source>
        <translation>Du blev flyttet til %1 af %2.</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>%1 entered channel.</source>
        <translation>%1 kom ind i kanalen.</translation>
    </message>
    <message>
        <location line="-355"/>
        <source>Server connection rejected: %1.</source>
        <translation>Forbindelse til server afvist: %1.</translation>
    </message>
    <message>
        <location line="+144"/>
        <source>Denied: %1.</source>
        <translation>Nægtet. %1.</translation>
    </message>
    <message>
        <location line="+384"/>
        <source>Message from %1</source>
        <translation>Besked fra %1</translation>
    </message>
    <message>
        <location filename="UserModel.cpp" line="+1417"/>
        <source>You have Channel Dragging set to &quot;Do Nothing&quot; so the channel wasn&apos;t moved.</source>
        <translation>Du har &quot;Flytning af kanaler&quot; sat til &quot;Gør intet&quot;, så kanalen blev ikke flyttet.</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Unknown Channel Drag mode in UserModel::dropMimeData.</source>
        <translation>Ukendt tilstand for flytning af kanaler i UserModel::dropMimeData.</translation>
    </message>
    <message>
        <location filename="main.cpp" line="-276"/>
        <source>Usage: mumble [options] [&lt;url&gt;]

&lt;url&gt; specifies a URL to connect to after startup instead of showing
the connection window, and has the following form:
mumble://[&lt;username&gt;[:&lt;password&gt;]@]&lt;host&gt;[:&lt;port&gt;][/&lt;channel&gt;[/&lt;subchannel&gt;...]][?version=&lt;x.y.z&gt;]

The version query parameter has to be set in order to invoke the
correct client version. It currently defaults to 1.2.0.

Valid options are:
  -h, --help    Show this help text and exit.
  -m, --multiple
                Allow multiple instances of the client to be started.
  -n, --noidentity
                Suppress loading of identity files (i.e., certificates.)
</source>
        <translation>Anvendelse: mumble [options] [&lt;url&gt;]

&lt;url&gt; angiver en URL der oprettes forbindelse til efter opstart, i stedet for at vise
serverforbindelse-vinduet, der har følgende format:
mumble://[&lt;brugernavn&gt;[:&lt;adgangskode&gt;]@]&lt;adresse&gt;[:&lt;port&gt;][/&lt;kanal&gt;[/&lt;underkanal&gt;...]][?version=&lt;x.y.z&gt;]

Version-forespørgselsparameteret skal være angivet for at påkalde den
korrekte klientversion. Standardværdien er 1.2.0.

Gyldige parametre er:
  -h, --help    Viser denne hjælpetekst og afslutter.
  -m, --multiple
                Tillader at flere instanser af klienten startes.
  -n, --noidentity
                Tilbagehold indlæsningen af identitetsfiler (dvs. certifikater.)
</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>Invocation</source>
        <translatorcomment>Alternative: Påkaldelse</translatorcomment>
        <translation>Opmærksomhed</translation>
    </message>
    <message>
        <location line="+194"/>
        <source>Welcome to Mumble.</source>
        <translation>Velkommen til Mumble.</translation>
    </message>
    <message>
        <location line="+76"/>
        <source>Skipping version check in debug mode.</source>
        <translation>Springer over versionstjek i fejlfindingstilstand.</translation>
    </message>
    <message>
        <location filename="MainWindow.ui"/>
        <source>Hide Frame</source>
        <translation>Skjul ramme</translation>
    </message>
    <message>
        <location/>
        <source>Toggle showing frame on minimal window</source>
        <translation>Slå visning af ramme på minimal-vinduet til/fra</translation>
    </message>
    <message>
        <location/>
        <source>This will toggle whether the minimal window should have a frame for moving and resizing.</source>
        <translation>Dette vil slå til/fra hvorvidt det minimale vindue skal have en ramme der kan bruges til flytning eller ændring af størrelsen.</translation>
    </message>
    <message>
        <location/>
        <source>View Comment</source>
        <translation>Vis kommentar</translation>
    </message>
    <message>
        <location/>
        <source>View comment in editor</source>
        <translation>Vis kommentar i redigeringsprogram</translation>
    </message>
    <message>
        <location/>
        <source>Query server for connection information for user</source>
        <translation>Forespørg serveren om forbindelses information til bruger</translation>
    </message>
    <message>
        <location/>
        <source>S&amp;erver</source>
        <translation>S&amp;erver</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Self</source>
        <translation>&amp;Selv</translation>
    </message>
    <message>
        <location/>
        <source>Audio S&amp;tatistics</source>
        <translation>Lyds&amp;tatistikker</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Unlink Plugins</source>
        <translation>&amp;Unlink plugins</translation>
    </message>
    <message>
        <location/>
        <source>R&amp;egister</source>
        <translation>R&amp;egistrér</translation>
    </message>
    <message>
        <location/>
        <source>Register yourself on the server</source>
        <translation>Registrér dig selv på serveren</translation>
    </message>
    <message>
        <location/>
        <source>Change &amp;Avatar</source>
        <translation>Skift &amp;avatar</translation>
    </message>
    <message>
        <location/>
        <source>Change your avatar image on this server</source>
        <translation>Skift dit avaterbillede på denne server</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove Avatar</source>
        <translation>&amp;Fjern avatar</translation>
    </message>
    <message>
        <location/>
        <source>Remove currently defined avatar image.</source>
        <translation>Fjern nuværende indstilte avatarbillede.</translation>
    </message>
    <message>
        <location/>
        <source>Icon Toolbar</source>
        <translation>Ikon værktøjslinje</translation>
    </message>
    <message>
        <location/>
        <source>Change your own comment</source>
        <translation>Skift din egen kommentar</translation>
    </message>
    <message>
        <location/>
        <source>Recording</source>
        <translation>Optager</translation>
    </message>
    <message>
        <location/>
        <source>Priority Speaker</source>
        <translation>Prioriteret taler</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Copy URL</source>
        <translation>&amp;Kopiér URL</translation>
    </message>
    <message>
        <location/>
        <source>Copies a link to this channel to the clipboard.</source>
        <translation>Kopierer et link til denne kanal til udklipsholderen.</translation>
    </message>
    <message>
        <location/>
        <source>Ignore Messages</source>
        <translation>Ignorér beskeder</translation>
    </message>
    <message>
        <location/>
        <source>Locally ignore user&apos;s text chat messages.</source>
        <translation>Ignorerer lokalt  brugerens tekst-chatbeskeder.</translation>
    </message>
    <message>
        <location/>
        <source>Silently drops all text messages from the user.</source>
        <translation>Ser lydløst bort fra alle tekstbeskeder fra brugeren.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Ban list</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Edit ban list on server</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>This lets you edit the server-side IP ban list.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>&amp;Filter on/off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Toggle the channel filter (Ctrl+F)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Enable or disable the filtering of select channels.
By default all empty channels will be filtered.
You can mark additional channels for filtering from
the channel&apos;s context menu.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+F</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>&amp;Hide Channel when Filtering</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NetworkConfig</name>
    <message>
        <location filename="NetworkConfig.cpp" line="+56"/>
        <source>Network</source>
        <translation>Netværk</translation>
    </message>
    <message>
        <location line="+36"/>
        <source>Updates are mandatory when using snapshot releases.</source>
        <translation>Opdateringer er påkrævet, når man bruger snapshot-udgaver.</translation>
    </message>
    <message>
        <location filename="NetworkConfig.ui"/>
        <source>Connection</source>
        <translation>Forbindelse</translation>
    </message>
    <message>
        <location/>
        <source>Use TCP compatibility mode</source>
        <oldsource>Use TCP compatability mode</oldsource>
        <translation>Brug TCP-kompatibilitetstilstand</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Enable TCP compatibility mode&lt;/b&gt;.&lt;br /&gt;This will make Mumble use only TCP when communicating with the server. This will increase overhead and cause lost packets to produce noticeable pauses in communication, so this should only be used if you are unable to use the default (which uses UDP for voice and TCP for control).</source>
        <translation>&lt;b&gt;Aktivér TCP-kompatibilitetstilstand&lt;/b&gt;.&lt;br /&gt;Dette vil få Mumble til kun at bruge TCP når der kommunikeres med serveren. Dette vil forøge tabet, og forårsage at mistede pakker frembringer hørbare pauser i kommunikationen, så dette skal kun bruges, hvis du ikke er i stand til at bruge standarden (som bruger UDP for tale og TCP for kontrol).</translation>
    </message>
    <message>
        <location/>
        <source>Reconnect when disconnected</source>
        <translation>Opret forbindelse igen ved afbrudt forbindelse</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Reconnect when disconnected&lt;/b&gt;.&lt;br /&gt;This will make Mumble try to automatically reconnect after 10 seconds if your server connection fails.</source>
        <translation>&lt;b&gt;Opret forbindelse igen ved mistet forbindelse&lt;/b&gt;.&lt;br /&gt;Dette vil få Mumble til at forsøge at oprette forbindelse igen efter 10 sekunder hvis forbindelsen mistes.</translation>
    </message>
    <message>
        <location/>
        <source>Reconnect automatically</source>
        <translation>Opret automatisk forbindelse igen</translation>
    </message>
    <message>
        <location/>
        <source>Proxy</source>
        <translation>Proxy</translation>
    </message>
    <message>
        <location/>
        <source>Type</source>
        <translation>Type</translation>
    </message>
    <message>
        <location/>
        <source>Type of proxy to connect through</source>
        <translation>Proxytype der skal forbindes gennem</translation>
    </message>
    <message>
        <location/>
        <source>Direct connection</source>
        <translation>Direkte forbindelse</translation>
    </message>
    <message>
        <location/>
        <source>HTTP(S) proxy</source>
        <translation>HTTP(S) proxy</translation>
    </message>
    <message>
        <location/>
        <source>SOCKS5 proxy</source>
        <translation>SOCKS5 proxy</translation>
    </message>
    <message>
        <location/>
        <source>Hostname</source>
        <translation>Værtsnavn</translation>
    </message>
    <message>
        <location/>
        <source>Hostname of the proxy</source>
        <translation>Værtsnavn for proxy&apos;en</translation>
    </message>
    <message>
        <location/>
        <source>Force TCP mode</source>
        <translation>Gennemtving TCP-tilstand</translation>
    </message>
    <message>
        <location/>
        <source>Enable QoS to prioritize packets</source>
        <translation>Aktivér QoS til pakkeprioritering</translation>
    </message>
    <message>
        <location/>
        <source>This will enable QoS, which will attempt to prioritize voice packets over other traffic.</source>
        <translation>Dette vil aktivere QOS, som vil forsøge at prioritere lydpakker over andet trafik.</translation>
    </message>
    <message>
        <location/>
        <source>Use Quality of Service</source>
        <translation>Brug Quality of Service</translation>
    </message>
    <message>
        <location/>
        <source>Don&apos;t send certificate to server and don&apos;t save passwords. (Not saved).</source>
        <translation>Send ikke certifikat til server og gem ikke adgangskoder. (Gemmes ikke).</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This will suppress identity information from the client.&lt;/b&gt;&lt;p&gt;The client will not identify itself with a certificate, even if defined, and will not cache passwords for connections. This is primarily a test-option and is not saved.&lt;/p&gt;</source>
        <translation>&lt;b&gt;Dette vil tilbageholde identificerbar information, så det ikke sendes til serveren.&lt;/b&gt;&lt;p&gt;Du vil ikke autenticifere med et certifikat, selvom du har ét, og du vil ikke opbevare adgangskoder for forbindelser. Dette er primært en test-indstilling og bliver derfor ikke gemt.&lt;/p&gt;</translation>
    </message>
    <message>
        <location/>
        <source>Suppress certificate and password storage</source>
        <translation>Tilbagehold certifikat og gemte adgangskoder</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Type of proxy to connect through.&lt;/b&gt;&lt;br /&gt;This makes Mumble connect through a proxy for all outgoing connections. Note: Proxy tunneling forces Mumble into TCP compatibility mode, causing all voice data to be sent via the control channel.</source>
        <translation>&lt;b&gt;Typen af proxyen der skal oprettes forbindelse gennem.&lt;/b&gt;&lt;br /&gt;Dette får Mumble til at oprette forbindelse gennem en proxy for alle udgående forbindelser. Vær opmærksom på, at brug af proxy tvinger Mumble til at bruge TCP-kompatibilitetstilstand, som resulterer, i at alt tale-data vil blive sendt gennem kontrolkanalen.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Hostname of the proxy.&lt;/b&gt;&lt;br /&gt;This field specifies the hostname of the proxy you wish to tunnel network traffic through.</source>
        <translation>&lt;b&gt;Værtsnavn for proxyen.&lt;/b&gt;&lt;br /&gt;Dette felt angiver værtsnavnet for proxyen, som du ønsker at føre alt netværkstrafik gennem.</translation>
    </message>
    <message>
        <location/>
        <source>Port</source>
        <translation>Port</translation>
    </message>
    <message>
        <location/>
        <source>Port number of the proxy</source>
        <translation>Portnummer for proxyen</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Port number of the proxy.&lt;/b&gt;&lt;br /&gt;This field specifies the port number that the proxy expects connections on.</source>
        <translation>&lt;b&gt;Portnummeret for proxyen.&lt;/b&gt;&lt;br /&gt;Dette felt angiver portnummeret som proxyen forventer forbindelser på.</translation>
    </message>
    <message>
        <location/>
        <source>Username</source>
        <translation>Brugernavn</translation>
    </message>
    <message>
        <location/>
        <source>Username for proxy authentication</source>
        <translation>Brugernavn for proxyautentificering</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Username for proxy authentication.&lt;/b&gt;&lt;br /&gt;This specifies the username you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.</source>
        <translation>&lt;b&gt;Brugernavn for proxy-autentificering.&lt;/b&gt;&lt;br /&gt;Dette angiver brugernavnet, som du vil bruge til at autenticifere dig selv med proxyen. I tilfælde af at proxyen ikke bruger autenticikation, eller hvis du ønsker at oprette forbindelse anonymt, skal du blot lade dette være tomt.</translation>
    </message>
    <message>
        <location/>
        <source>Password</source>
        <translation>Adgangskode</translation>
    </message>
    <message>
        <location/>
        <source>Password for proxy authentication</source>
        <translation>Adgangskode for proxyautentificering</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Password for proxy authentication.&lt;/b&gt;&lt;br /&gt;This specifies the password you use for authenticating yourself with the proxy. In case the proxy does not use authentication, or you want to connect anonymously, simply leave this field blank.</source>
        <translation>&lt;b&gt;Adgangskode for proxy-autentificering.&lt;/b&gt;&lt;br /&gt;Dette felt angiver adgangskoden, som du vil bruge til at autentificere dig selv med proxyen. I tilfælde af at proxyen ikke bruger autenticikation, eller hvis du ønsker at oprette forbindelse anonymt, skal du blot lade dette være tomt.</translation>
    </message>
    <message>
        <location/>
        <source>Misc</source>
        <translation>Diverse</translation>
    </message>
    <message>
        <location/>
        <source>Prevent log from downloading images</source>
        <translation>Forhindrér loggen i at downloade billeder</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Disable image download&lt;/b&gt;&lt;br/&gt;
Prevents the client from downloading images embedded into chat messages with the img tag.</source>
        <translation>&lt;b&gt;Deaktivér billeddownload&lt;/b&gt;&lt;br /&gt;
Forhindrer at programmet downloader billeder, der er indsat i chatbeskeder med img-tagget.</translation>
    </message>
    <message>
        <location/>
        <source>Disable image download</source>
        <translation>Deaktivér downloading af billeder</translation>
    </message>
    <message>
        <location/>
        <source>Mumble services</source>
        <translation>Mumble tjenester</translation>
    </message>
    <message>
        <location/>
        <source>Check for new releases of Mumble automatically.</source>
        <translation>Tjek automatisk for ny Mumble version.</translation>
    </message>
    <message>
        <location/>
        <source>This will check for new releases of Mumble every time you start the program, and notify you if one is available.</source>
        <translation>Dette vil tjekke for nye udgivelser af Mumble, hver gang du starter programmet, og give dig besked hvis en ny er tilgængelig.</translation>
    </message>
    <message>
        <location/>
        <source>Check for application updates on startup</source>
        <translation>Tjek for programopdateringer ved start</translation>
    </message>
    <message>
        <location/>
        <source>Check for new releases of plugins automatically.</source>
        <translation>Tjek automatisk for nye pluginudgivelser.</translation>
    </message>
    <message>
        <location/>
        <source>This will check for new releases of plugins every time you start the program, and download them automatically.</source>
        <translation>Dette vil tjekke for nye udgivelser af plugins, hver gang du starter programmet, og downloade dem automatisk.</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;Submit anonymous statistics.&lt;/b&gt;&lt;br /&gt;Mumble has a small development team, and as such needs to focus its development where it is needed most. By submitting a bit of statistics you help the project determine where to focus development.</source>
        <translation>&lt;b&gt;Indsend anonyme statistikker.&lt;/b&gt;&lt;br /&gt;Mumble har et lille udviklingsteam, og der skal derfor fokuseres på udvikling, hvor det er mest nødvendigt. Ved at indsende en smule statistikker vil du hjælpe projektet med at finde ud af, hvor der skal fokuseres på udvikling.</translation>
    </message>
    <message>
        <location/>
        <source>Submit anonymous statistics to the Mumble project</source>
        <translation>Indsend anonyme statistikker til Mumble-projektet</translation>
    </message>
    <message>
        <location/>
        <source>Submit anonymous statistics</source>
        <translation>Send anonyme statistikker</translation>
    </message>
    <message>
        <location/>
        <source>Reconnect to last used server when starting Mumble</source>
        <translation>Forbind igen til den sidst anvendte server når Mumble starter</translation>
    </message>
    <message>
        <location/>
        <source>Reconnect to last server on startup</source>
        <translation>Forbind igen til sidst anvendte server ved opstart</translation>
    </message>
    <message>
        <location/>
        <source>Download plugin and overlay updates on startup</source>
        <translation>Download plugin- og overlægningsopdateringer ved opstart</translation>
    </message>
</context>
<context>
    <name>Overlay</name>
    <message>
        <location filename="OverlayEditorScene.cpp" line="+119"/>
        <location filename="OverlayUser.cpp" line="+153"/>
        <source>Silent</source>
        <translation>Stille</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="OverlayUser.cpp" line="+3"/>
        <source>Talking</source>
        <translation>Taler</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="OverlayUser.cpp" line="+3"/>
        <source>Whisper</source>
        <translation>Hvisker</translation>
    </message>
    <message>
        <location line="+3"/>
        <location filename="OverlayUser.cpp" line="+3"/>
        <source>Shout</source>
        <translation>Råber</translation>
    </message>
    <message>
        <location line="+17"/>
        <location filename="OverlayUser.cpp" line="-110"/>
        <source>Channel</source>
        <translation>Kanal</translation>
    </message>
    <message>
        <location filename="Overlay.cpp" line="+104"/>
        <source>Failed to create communication with overlay at %2: %1. No overlay will be available.</source>
        <translation>Det mislykkedes at oprette kommunikation med overlægningen på %2: %1. Der vil ikke være nogen overlægning tilgængelig.</translation>
    </message>
</context>
<context>
    <name>OverlayClient</name>
    <message>
        <location filename="OverlayUserGroup.cpp" line="+97"/>
        <source>Filter</source>
        <translation>Filter</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Only talking</source>
        <translation>Kun talende</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Talking and recently active</source>
        <translation>Snakkende og nyligt aktive</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>All in current channel</source>
        <translation>Alle i nuværende kanal</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>All in linked channels</source>
        <translation>Alle i sammenkædede kanaler</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Always show yourself</source>
        <translation>Vis altid dig selv</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Configure recently active time (%1 seconds)...</source>
        <translation>Konfigurér tiden for værende nyligt aktiv (%1 sekunder)...</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Columns</source>
        <translation>Kolonner</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Sort</source>
        <translation>Sortering</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Alphabetically</source>
        <translation>Alfabetisk</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Last state change</source>
        <translation>Seneste tilstandsændring</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Edit...</source>
        <translation>Redigér...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Reset Zoom</source>
        <translation>Nulstil zoom</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>Configure recently active time</source>
        <translation>Konfigurér tiden for værende nyligt aktiv</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Amount of seconds users remain active after talking:</source>
        <translation>Antal sekunder brugere forbliver aktive efter at have snakket:</translation>
    </message>
</context>
<context>
    <name>OverlayConfig</name>
    <message>
        <location filename="OverlayConfig.cpp" line="+83"/>
        <source>To move the users, drag the little red dot.</source>
        <translation>For at flytte brugerne, træk i den lille røde prik.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>To resize the users, mouse wheel over a user.</source>
        <oldsource>To resize the users, mousewheel over a user.</oldsource>
        <translation>For at ændre størrelsen af brugerne, drej på musehjulet over en bruger.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>For more options, right click a user.</source>
        <oldsource>For more options, rightclick a user.</oldsource>
        <translation>For flere valgmuligheder, højreklik på en bruger.</translation>
    </message>
    <message>
        <location line="+244"/>
        <source>Overlay</source>
        <translation>Overlægning</translation>
    </message>
    <message>
        <location line="+77"/>
        <source>Choose executable</source>
        <translation>Vælg eksekverbar</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Choose application</source>
        <translation>Vælg program</translation>
    </message>
    <message>
        <location line="+95"/>
        <source>Load Overlay Presets</source>
        <translation>Indlæs forudindstillede overlægninger</translation>
    </message>
    <message>
        <location line="+2"/>
        <location line="+28"/>
        <source>Mumble overlay presets (*.mumblelay)</source>
        <translation>Mumble forudindstillede overlægninger (*.mumblelay)</translation>
    </message>
    <message>
        <location line="-2"/>
        <source>Save Overlay Presets</source>
        <translation>Gem forudindstillede overlægninger</translation>
    </message>
    <message>
        <location filename="Overlay.ui"/>
        <source>Options</source>
        <translation>Valgmuligheder</translation>
    </message>
    <message>
        <location/>
        <source>Enable overlay.</source>
        <translation>Aktivér overlægning.</translation>
    </message>
    <message>
        <location/>
        <source>Enable Overlay</source>
        <translation>Aktivér overlægning</translation>
    </message>
    <message>
        <location/>
        <source>This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.&lt;br /&gt;Please note that if you start Mumble after starting the application, or if you disable the overlay while the application is running, there is no safe way to restart the overlay without also restarting the application.</source>
        <oldsource>This sets whether the overlay is enabled or not. This setting is only checked when applications are started, so make sure Mumble is running and this option is on before you start the application.&lt;br /&gt;Please note that if you start the application after starting Mumble, or if you disable the overlay while running, there is no safe way to restart the overlay without also restarting the application.</oldsource>
        <translation>Dette indstiller hvorvidt overlægningen er aktiveret eller ej. Denne indstilling bliver kun tjekket, når programmer startes, så vær sikker på at Mumble er startet, og denne valgmulighed er slået til, før du starter et program.&lt;br /&gt;Vær opmærksom på at hvis du starter Mumble efter du har startet programmet, eller hvis du deaktiverer overlægningen mens programmet kører, er der ingen sikker måde at genstarte overlægningen uden også at genstarte programmet.</translation>
    </message>
    <message>
        <location/>
        <source>Layout</source>
        <translation>Layout</translation>
    </message>
    <message>
        <location/>
        <source>Overlay exceptions</source>
        <translation>Undtagelser for overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Blacklist</source>
        <translation>Blacklist</translation>
    </message>
    <message>
        <location/>
        <source>Whitelist</source>
        <translation>Whitelist</translation>
    </message>
    <message>
        <location/>
        <source>Remove</source>
        <translation>Fjern</translation>
    </message>
    <message>
        <location/>
        <source>Uninstall Overlay</source>
        <translation>Afinstallér overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Overlay Installation</source>
        <translation>Installation af overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Mumble has detected that you do not have the Mumble Overlay installed.

Click the button below to install the overlay.</source>
        <translation>Mumble har detekteret, at du ikke har Mumble-overlægningen installeret.

Klik på knappen nedenfor for at installere overlægningen.</translation>
    </message>
    <message>
        <location/>
        <source>Install Mumble Overlay</source>
        <translation>Installér Mumble overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Overlay Upgrade</source>
        <translation>Opgradering for overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Mumble has detected an old version of the overlay support files installed on your computer.

To upgrade these files to their latest versions, click the button below.</source>
        <translation>Mumble har detekteret en gammel version af overlægnings-support-filerne på din computer.

For at opgradere disse filer til deres nyeste version, klik på knappen nedenfor.</translation>
    </message>
    <message>
        <location/>
        <source>Upgrade Mumble Overlay</source>
        <translation>Opgradér Mumble overlægning</translation>
    </message>
    <message>
        <location/>
        <source>Display a frame counter in the overlay</source>
        <translation>Vis en frame-tæller på overlægningen</translation>
    </message>
    <message>
        <location/>
        <source>Show FPS counter</source>
        <translation>Vis FPS-tæller</translation>
    </message>
    <message>
        <location/>
        <source>Load an overlay preset from file</source>
        <translation>Indlæs en forudindstillet overlægning fra en fil</translation>
    </message>
    <message utf8="true">
        <location/>
        <source>Load…</source>
        <translation>Indlæs...</translation>
    </message>
    <message>
        <location/>
        <source>Save your overlay settings to file</source>
        <translation>Gem dine indstillinger for overlægningen i en fil</translation>
    </message>
    <message utf8="true">
        <location/>
        <source>Save…</source>
        <translation>Gem...</translation>
    </message>
    <message>
        <location/>
        <source>Set the overlay font.</source>
        <translation>Indstil skrifttypen for overlægningen.</translation>
    </message>
    <message>
        <location/>
        <source>Set the overlay text color.</source>
        <translation>Indstil tekstfarven for overlægningen.</translation>
    </message>
    <message>
        <location/>
        <source>Color</source>
        <translation>Farve</translation>
    </message>
    <message>
        <location/>
        <source>Add...</source>
        <translation>Tilføj...</translation>
    </message>
    <message>
        <location/>
        <source>Font</source>
        <translation>Skrifttype</translation>
    </message>
    <message>
        <location/>
        <source>To list exceptions, use a</source>
        <translation>For at angive undtagelser, brug en</translation>
    </message>
    <message>
        <location/>
        <source>Show the overlay in all applicable programs except</source>
        <translation>Vis overlægningen i alle relevante programmer undtagen</translation>
    </message>
    <message>
        <location/>
        <source>Show the overlay only in</source>
        <translation>Vis kun overlægningen i</translation>
    </message>
    <message>
        <location/>
        <source>FPS and Clock Display</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Display a clock in the overlay showing the current local time (system time).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Show Clock</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OverlayEditor</name>
    <message>
        <location filename="OverlayEditor.ui"/>
        <source>State</source>
        <translation>Tilstand</translation>
    </message>
    <message>
        <location/>
        <source>User is not talking</source>
        <translation>Brugeren taler ikke</translation>
    </message>
    <message>
        <location/>
        <source>Passive</source>
        <translation>Passiv</translation>
    </message>
    <message>
        <location/>
        <source>User is talking in your channel or a linked channel</source>
        <translation>Brugeren snakker i din kanal eller en sammenkædet kanal</translation>
    </message>
    <message>
        <location/>
        <source>Talking</source>
        <translation>Snakker</translation>
    </message>
    <message>
        <location/>
        <source>User is whispering to you privately</source>
        <translation>Brugeren hvisker privat til dig</translation>
    </message>
    <message>
        <location/>
        <source>Private Whisper</source>
        <translation>Privat hvisken</translation>
    </message>
    <message>
        <location/>
        <source>User is shouting to your channel</source>
        <translation>Brugeren råber til din kanal</translation>
    </message>
    <message>
        <location/>
        <source>Channel Whisper</source>
        <translation>Hvisken til kanal</translation>
    </message>
    <message>
        <location/>
        <source>Zoom</source>
        <translation>Zoom</translation>
    </message>
    <message>
        <location/>
        <source>Zoom Factor</source>
        <translation>Zoom-faktor</translation>
    </message>
    <message>
        <location/>
        <source>Enabled Elements</source>
        <translation>Aktiverede elementer</translation>
    </message>
    <message>
        <location/>
        <source>User avatar, chosen by each user</source>
        <translation>Bruger-avatar, valgt af den enkelte bruger</translation>
    </message>
    <message>
        <location/>
        <source>Avatar</source>
        <translation>Avatar</translation>
    </message>
    <message>
        <location/>
        <source>User&apos;s name</source>
        <translation>Brugerens navn</translation>
    </message>
    <message>
        <location/>
        <source>Username</source>
        <translation>Brugernavn</translation>
    </message>
    <message>
        <location/>
        <source>Name of user&apos;s channel, if outside your current channel</source>
        <translation>Navnet på brugerens kanal, hvis brugeren er uden for din nuværende kanal</translation>
    </message>
    <message>
        <location/>
        <source>Channel</source>
        <translation>Kanal</translation>
    </message>
    <message>
        <location/>
        <source>Muted or deafened</source>
        <translation>Hvorvidt mikrofon eller lyd er aktiveret eller deaktiveret</translation>
    </message>
    <message>
        <location/>
        <source>Mute state</source>
        <translatorcomment>Burde måske være: &quot;Lyd aktiveret/deaktiveret&quot;</translatorcomment>
        <translation>Lyd on/off</translation>
    </message>
    <message>
        <location/>
        <source>Bounding box, automatically shrunk to minimum size to contain all visible elements</source>
        <translation>Afgrænsningsrammen skrumper automatisk til den mindst mulige størrelse, hvor alle synlige elementer kan være</translation>
    </message>
    <message>
        <location/>
        <source>Bounding box</source>
        <translation>Afgrænsningsramme</translation>
    </message>
    <message>
        <location/>
        <source>Overlay Editor</source>
        <translation>Redigering af overlægning</translation>
    </message>
</context>
<context>
    <name>OverlayEditorScene</name>
    <message>
        <location filename="OverlayEditorScene.cpp" line="+397"/>
        <source>Layout preset</source>
        <translation>Forudindstillet layout</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Large square avatar</source>
        <translation>Stort firkantet avatar</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Avatar and Name</source>
        <translation>Avatar og navn</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>User Opacity</source>
        <translation>Uigennemsigtighed for brugere</translation>
    </message>
    <message>
        <location line="+6"/>
        <location line="+31"/>
        <source>%1%</source>
        <translation>%1%</translation>
    </message>
    <message>
        <location line="-5"/>
        <source>Object Opacity</source>
        <translation>Uigennemsigtighed for objekter</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Alignment</source>
        <translation>Justering</translation>
    </message>
    <message>
        <location line="+11"/>
        <source>Left</source>
        <translation>Venstre</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+18"/>
        <source>Center</source>
        <translation>Centreret</translation>
    </message>
    <message>
        <location line="-13"/>
        <source>Right</source>
        <translation>Højre</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Top</source>
        <translation>Top</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Bottom</source>
        <translation>Bund</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Color...</source>
        <translation>Farve...</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Font...</source>
        <translation>Skrifttype...</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Bounding box</source>
        <translation>Afgrænsningsramme</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pen width</source>
        <translation>Pen-bredde</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Padding</source>
        <translation>Spaltefyld</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Pen color</source>
        <translation>Pen-farve</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Fill color</source>
        <translation>Udfyldningsfarve</translation>
    </message>
    <message>
        <location line="+87"/>
        <source>Pick pen color</source>
        <translation>Vælg pen-farve</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Pick fill color</source>
        <translation>Vælg udfyldningsfarve</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Pick color</source>
        <translation>Vælg farve</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Pick font</source>
        <translation>Vælg skrifttype</translation>
    </message>
</context>
<context>
    <name>OverlayPrivateWin</name>
    <message>
        <location filename="Overlay_win.cpp" line="+58"/>
        <source>Failed to load overlay library. This means either that:
- the library (mumble_ol.dll) wasn&apos;t found in the directory you ran Mumble from
- you&apos;re on an OS earlier than WinXP SP2</source>
        <translation>Det mislykkedes at indlæse overlægningsbibliotek. Dette skyldes enten at:
- biblioteket (mumble_ol.dll) ikke kunne findes i det bibliotek du kørte Mumble fra
- du er på et operativsystem ældre end WinXP SP2</translation>
    </message>
</context>
<context>
    <name>PluginConfig</name>
    <message>
        <location filename="Plugins.ui"/>
        <location filename="Plugins.cpp" line="+88"/>
        <source>Plugins</source>
        <translation>Plugins</translation>
    </message>
    <message>
        <location filename="Plugins.cpp" line="+60"/>
        <source>Plugin has no configure function.</source>
        <translation>Plugin&apos;et har ingen konfigurationsfunktioner.</translation>
    </message>
    <message>
        <location line="+21"/>
        <source>Plugin has no about function.</source>
        <translation>Plugin&apos;et har ingen om-funktion.</translation>
    </message>
    <message>
        <location filename="Plugins.ui"/>
        <source>Form</source>
        <translation>Form</translation>
    </message>
    <message>
        <location/>
        <source>Options</source>
        <translation>Valgmuligheder</translation>
    </message>
    <message>
        <location/>
        <source>Enable plugins and transmit positional information</source>
        <translation>Aktivér plugins og transmittér placeringsinformation</translation>
    </message>
    <message>
        <location/>
        <source>This allows plugins for supported games to fetch your in-game position and transmit it with each voice packet. This enables other users to hear your voice in-game from the direction your character is in relation to their own.</source>
        <translation>Dette tillader plugins for understøttede spil, at aflæse din position i spillet og transmittere den sammen med hver enkelt lydpakke. Dette gør andre brugere i stand til, at høre din stemme i spillet fra den retning din karakter er i forhold til deres egen.</translation>
    </message>
    <message>
        <location/>
        <source>Link to Game and Transmit Position</source>
        <translation>Sammenkæd til spil og transmittér placering</translation>
    </message>
    <message>
        <location/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location/>
        <source>Enabled</source>
        <translation>Aktiveret</translation>
    </message>
    <message>
        <location/>
        <source>Reloads all plugins</source>
        <translation>Genindlæs alle plugins</translation>
    </message>
    <message>
        <location/>
        <source>This rescans and reloads plugins. Use this if you just added or changed a plugin to the plugins directory.</source>
        <translation>Dette scanner og loader plugins igen. Brug dette hvis du lige har ændret eller tilføjet et plugin til plugin-biblioteket.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Reload plugins</source>
        <translation>&amp;Genindlæs plugins</translation>
    </message>
    <message>
        <location/>
        <source>Information about plugin</source>
        <translation>Information om plugin</translation>
    </message>
    <message>
        <location/>
        <source>This shows a small information message about the plugin.</source>
        <translation>Dette viser en lille informationsbesked om pluginet.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;About</source>
        <translation>&amp;Om</translation>
    </message>
    <message>
        <location/>
        <source>Show configuration page of plugin</source>
        <translation>Vis konfigurationsside for plugin</translation>
    </message>
    <message>
        <location/>
        <source>This shows the configuration page of the plugin, if any.</source>
        <translation>Dette viser konfigurations-siden for pluginet, hvis der er nogen.</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Configure</source>
        <translation>&amp;Konfigurér</translation>
    </message>
</context>
<context>
    <name>Plugins</name>
    <message>
        <location filename="Plugins.cpp" line="+350"/>
        <source>Skipping plugin update in debug mode.</source>
        <translation>Springer over pluginopdateringer i fejlfindingstilstand.</translation>
    </message>
    <message>
        <location line="+150"/>
        <location line="+6"/>
        <source>Downloaded new or updated plugin to %1.</source>
        <translation>Downloadede nyt eller opdateret plugin til %1.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Failed to install new plugin to %1.</source>
        <translation>Installation af nyt plugin til %1 mislykkedes.</translation>
    </message>
    <message>
        <location line="-273"/>
        <source>%1 lost link.</source>
        <translation>%1 mistede link.</translation>
    </message>
    <message>
        <location line="+74"/>
        <source>%1 linked.</source>
        <translation>%1 er linket.</translation>
    </message>
</context>
<context>
    <name>PortAudioSystem</name>
    <message>
        <location filename="PAAudio.cpp" line="+275"/>
        <source>Default Device</source>
        <translation>Standardenhed</translation>
    </message>
</context>
<context>
    <name>PulseAudioSystem</name>
    <message>
        <location filename="PulseAudio.cpp" line="+756"/>
        <source>Default Input</source>
        <translation>Standardindspilning</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Default Output</source>
        <translation>Standardafspilning</translation>
    </message>
</context>
<context>
    <name>RichTextEditor</name>
    <message>
        <location filename="RichTextEditor.cpp" line="+255"/>
        <source>Failed to load image</source>
        <translation>Indlæsning af billede mislykkedes</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Image file too large to embed in document. Please use images smaller than %1 kB.</source>
        <translation>Billedfilen er for stor til at blive indsat. Brug venligst billeder mindre end %1 kB.</translation>
    </message>
    <message>
        <location line="+81"/>
        <source>Message is too long.</source>
        <translation>Beskeden er for lang.</translation>
    </message>
    <message>
        <location filename="RichTextEditor.ui"/>
        <source>Display</source>
        <translation>Vis</translation>
    </message>
    <message>
        <location/>
        <source>Source Text</source>
        <translation>Kildekode</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Bold</source>
        <translation>&amp;Fed</translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+B</source>
        <translation>CTRL+F</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Italic</source>
        <translation>&amp;Kursiv</translation>
    </message>
    <message>
        <location/>
        <source>Italic</source>
        <translation>Kursiv</translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+I</source>
        <translation>CTRL+K</translation>
    </message>
    <message>
        <location/>
        <source>Underline</source>
        <translation>Understregning</translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+U</source>
        <translation>CTRL+U</translation>
    </message>
    <message>
        <location/>
        <source>Color</source>
        <translation>Farve</translation>
    </message>
    <message>
        <location/>
        <source>Insert Link</source>
        <translation>Insæt link</translation>
    </message>
    <message>
        <location/>
        <source>Ctrl+L</source>
        <translation>CTRL+L</translation>
    </message>
    <message>
        <location/>
        <source>Insert Image</source>
        <translation>Indsæt billede</translation>
    </message>
</context>
<context>
    <name>RichTextEditorLink</name>
    <message>
        <location filename="RichTextEditorLink.ui"/>
        <source>Add Link</source>
        <translation>Tilføj link</translation>
    </message>
    <message>
        <location/>
        <source>URL</source>
        <translation>URL</translation>
    </message>
    <message>
        <location/>
        <source>Text</source>
        <translation>Tekst</translation>
    </message>
</context>
<context>
    <name>ServerHandler</name>
    <message>
        <location filename="ServerHandler.cpp" line="+474"/>
        <source>UDP packets cannot be sent to or received from the server. Switching to TCP mode.</source>
        <translation>UDP-pakker kan ikke blive sendt eller modtaget fra serveren. Skifter til TCP-tilstand.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>UDP packets cannot be sent to the server. Switching to TCP mode.</source>
        <translation>UDP-pakker kan ikke blive sendt til serveren. Skifter til TCP-tilstand.</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>UDP packets cannot be received from the server. Switching to TCP mode.</source>
        <translation>UDP-pakker kan ikke blive modtaget fra serveren. Skifter til TCP-tilstand.</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>UDP packets can be sent to and received from the server. Switching back to UDP mode.</source>
        <translation>UDP-pakker kan igen blive sendt og modtaget fra serveren. Skifter tilbage til UDP-tilstand.</translation>
    </message>
    <message>
        <location line="+39"/>
        <source>Connection timed out</source>
        <translation>Forbindelse fik timeout</translation>
    </message>
</context>
<context>
    <name>ServerView</name>
    <message>
        <location filename="ConnectDialog.cpp" line="-633"/>
        <source>Favorite</source>
        <translation>Favoritter</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>LAN</source>
        <translation>LAN</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>Public Internet</source>
        <translation>Offentligt internet</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Africa</source>
        <translation>Afrika</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Asia</source>
        <translation>Asien</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>North America</source>
        <translation>Nordamerika</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>South America</source>
        <translation>Sydamerika</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Europe</source>
        <translation>Europa</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Oceania</source>
        <translation>Oceanien</translation>
    </message>
</context>
<context>
    <name>ShortcutActionWidget</name>
    <message>
        <location filename="GlobalShortcut.cpp" line="-576"/>
        <source>Unassigned</source>
        <translation>Ubenyttet</translation>
    </message>
</context>
<context>
    <name>ShortcutDelegate</name>
    <message>
        <location line="+376"/>
        <source>On</source>
        <translation>Til</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Off</source>
        <translation>Fra</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Toggle</source>
        <translation>Slå til/fra</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Unassigned</source>
        <translation>Ubenyttet</translation>
    </message>
</context>
<context>
    <name>ShortcutKeyWidget</name>
    <message>
        <location line="-450"/>
        <source>Press Shortcut</source>
        <translation>Tryk genvej</translation>
    </message>
</context>
<context>
    <name>ShortcutTargetDialog</name>
    <message>
        <location line="+206"/>
        <source>Root</source>
        <translation>Rod</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Parent</source>
        <translation>Forælder</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Current</source>
        <translation>Nuværende</translation>
    </message>
    <message>
        <location line="+5"/>
        <location line="+6"/>
        <source>Subchannel #%1</source>
        <translation>Underkanal #%1</translation>
    </message>
</context>
<context>
    <name>ShortcutTargetWidget</name>
    <message>
        <location line="+85"/>
        <source>...</source>
        <translation>...</translation>
    </message>
    <message>
        <location line="+41"/>
        <source>, </source>
        <translation>, </translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Root</source>
        <translation>Rod</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Parent</source>
        <translation>Forælder</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Current</source>
        <translation>Nuværende</translation>
    </message>
    <message>
        <location line="+3"/>
        <location line="+2"/>
        <source>Subchannel #%1</source>
        <translation>Underkanal #%1</translation>
    </message>
    <message>
        <location line="+7"/>
        <source>Invalid</source>
        <translation>Ugyldig</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Empty</source>
        <oldsource>&lt;Empty&gt;</oldsource>
        <translation>Tom</translation>
    </message>
</context>
<context>
    <name>ShortcutToggleWidget</name>
    <message>
        <location line="-271"/>
        <source>Off</source>
        <translation>Fra</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>Toggle</source>
        <translation>Slå til/fra</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>On</source>
        <translation>Til</translation>
    </message>
</context>
<context>
    <name>TextMessage</name>
    <message>
        <location filename="TextMessage.h" line="+45"/>
        <source>Enter text</source>
        <translation>Skriv tekst</translation>
    </message>
    <message>
        <location filename="TextMessage.ui"/>
        <source>If checked the message is recursively sent to all subchannels</source>
        <translation>Hvis denne er markeret, bliver beskeden rekursivt sendt til alle underkanaler</translation>
    </message>
    <message>
        <location/>
        <source>Send recursively to subchannels</source>
        <translation>Send rekursivt til underkanaler</translation>
    </message>
</context>
<context>
    <name>Tokens</name>
    <message>
        <location filename="Tokens.cpp" line="+72"/>
        <source>Empty Token</source>
        <translation>Tomt udtryk</translation>
    </message>
    <message>
        <location filename="Tokens.ui"/>
        <source>Mumble - Access Tokens</source>
        <translation>Mumble - Adgangsudtryk</translation>
    </message>
    <message>
        <location/>
        <source>List of access tokens on current server</source>
        <translation>Liste over adgangsudtryk på nuværende server</translation>
    </message>
    <message>
        <location/>
        <source>&lt;b&gt;This is an editable list of access tokens on the connected server.&lt;/b&gt;
&lt;br /&gt;
An access token is a text string, which can be used as a password for very simple access management on channels. Mumble will remember the tokens you&apos;ve used and resend them to the server next time you reconnect, so you don&apos;t have to enter these every time.
</source>
        <translation>&lt;b&gt;Dette er en redigerbar liste over adgangsudtryk for den forbundne server.&lt;/b&gt;
&lt;br /&gt;
Et adgangsudtryk er en tekststreng, der kan bruges som en adgangskode for meget simpel adgangsadministration på kanaler. Mumble vil huske de udtryk du har brugt, og gensende dem til serveren næste gang du forbinder, så du ikke skal skrive dem hver gang.</translation>
    </message>
    <message>
        <location/>
        <source>Add a token</source>
        <translation>Tilføj et adgangsudtryk</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Add</source>
        <translation>&amp;Tilføj</translation>
    </message>
    <message>
        <location/>
        <source>Remove a token</source>
        <translation>Fjern et adgangsudtryk</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Remove</source>
        <translation>&amp;Fjern</translation>
    </message>
</context>
<context>
    <name>UserEdit</name>
    <message>
        <location filename="UserEdit.ui"/>
        <source>Registered Users</source>
        <translation>Registrerede brugere</translation>
    </message>
    <message>
        <location/>
        <location filename="UserEdit.cpp" line="+124"/>
        <source>Remove</source>
        <translation>Fjern</translation>
    </message>
    <message>
        <location/>
        <location filename="UserEdit.cpp" line="-7"/>
        <source>Rename</source>
        <translation>Omdøb</translation>
    </message>
    <message>
        <location/>
        <source>Who are you looking for?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Days</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Weeks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Months</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Years</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location/>
        <source>Inactive for</source>
        <translation type="unfinished"></translation>
    </message>
    <message numerus="yes">
        <location filename="UserEdit.cpp" line="-64"/>
        <source>Registered users: %n account(s)</source>
        <translation type="unfinished">
            <numerusform></numerusform>
            <numerusform></numerusform>
        </translation>
    </message>
</context>
<context>
    <name>UserInformation</name>
    <message>
        <location filename="UserInformation.ui"/>
        <source>User Information</source>
        <translation>Bruger Information</translation>
    </message>
    <message>
        <location/>
        <source>Connection Information</source>
        <translation>Forbindelses Information</translation>
    </message>
    <message>
        <location/>
        <source>Version</source>
        <translation>Version</translation>
    </message>
    <message>
        <location/>
        <source>OS</source>
        <translation>OS</translation>
    </message>
    <message>
        <location/>
        <source>Certificate</source>
        <translation>Certifikat</translation>
    </message>
    <message>
        <location/>
        <source>IP Address</source>
        <translation>IP Adresse</translation>
    </message>
    <message>
        <location/>
        <source>CELT Versions</source>
        <translation>CELT Versioner</translation>
    </message>
    <message>
        <location/>
        <source>Details...</source>
        <translation>Detaljer...</translation>
    </message>
    <message>
        <location/>
        <source>Ping Statistics</source>
        <translation>Ping-statistikker</translation>
    </message>
    <message>
        <location/>
        <source>Pings received</source>
        <translation>Pings modtaget</translation>
    </message>
    <message>
        <location/>
        <source>Average ping</source>
        <translation>Gennemsnitlig ping</translation>
    </message>
    <message>
        <location/>
        <source>Ping deviation</source>
        <translation>Ping afvigelse</translation>
    </message>
    <message>
        <location/>
        <source>TCP (Control)</source>
        <translation>TCP (Kontrol)</translation>
    </message>
    <message>
        <location/>
        <source>UDP (Voice)</source>
        <translation>UDP (Stemme)</translation>
    </message>
    <message>
        <location/>
        <source>UDP Network statistics</source>
        <translation>UDP Netværks statistik</translation>
    </message>
    <message>
        <location/>
        <source>Good</source>
        <translation>God</translation>
    </message>
    <message>
        <location/>
        <source>Late</source>
        <translation>Sen</translation>
    </message>
    <message>
        <location/>
        <source>Lost</source>
        <translation>Tabt</translation>
    </message>
    <message>
        <location/>
        <source>Resync</source>
        <translation>Resynkroniser</translation>
    </message>
    <message>
        <location/>
        <source>From Client</source>
        <translation>Fra Klient</translation>
    </message>
    <message>
        <location/>
        <source>To Client</source>
        <translation>Til Klient</translation>
    </message>
    <message>
        <location/>
        <source>Connection time</source>
        <translation>Forbindelsestid</translation>
    </message>
    <message>
        <location filename="UserInformation.cpp" line="+106"/>
        <source>%1w</source>
        <translation>%1u</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1d</source>
        <translation></translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1h</source>
        <translation>%1t</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1m</source>
        <translation></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>%1s</source>
        <translation></translation>
    </message>
    <message>
        <location line="+33"/>
        <location line="+39"/>
        <source>, </source>
        <translation></translation>
    </message>
    <message>
        <location line="-13"/>
        <location line="+1"/>
        <source>%1 (%2)</source>
        <oldsource>%1.%2.%3 (%4)</oldsource>
        <translation>%1.(%2)</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Supported</source>
        <translation>Understøttet</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>Not Supported</source>
        <translation>Ikke undersøttet</translation>
    </message>
    <message>
        <location line="-123"/>
        <source>Not Reported</source>
        <translation>Ikke rapporteret</translation>
    </message>
    <message>
        <location line="+164"/>
        <source>%1 online (%2 idle)</source>
        <translation>%1 online (%2 inaktiv)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>%1 online</source>
        <translation></translation>
    </message>
    <message>
        <location line="+5"/>
        <source>%1 kbit/s</source>
        <translation></translation>
    </message>
    <message>
        <location filename="UserInformation.ui"/>
        <source>Bandwidth</source>
        <comment>GroupBox</comment>
        <translation>Båndbredde</translation>
    </message>
    <message>
        <location/>
        <source>Bandwidth</source>
        <comment>Label</comment>
        <translation>Båndbredde</translation>
    </message>
</context>
<context>
    <name>UserListModel</name>
    <message>
        <location filename="UserListModel.cpp" line="+83"/>
        <source>Nick</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inactive days</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Last channel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+29"/>
        <source>Last seen: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Never</source>
        <translation type="unfinished">Aldrig</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Channel id: %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>UserModel</name>
    <message>
        <location filename="UserModel.cpp" line="-823"/>
        <source>This is a user connected to the server. The icon to the left of the user indicates whether or not they are talking:</source>
        <translation>Dette er en bruger, der har oprettet forbindelse til serveren. Ikonet til venstre for brugeren viser om vedkommende snakker:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Talking to your channel.</source>
        <translation>Snakker til din kanal.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Shouting directly to your channel.</source>
        <oldsource>Whispering directly to your channel.</oldsource>
        <translation>Råben direkte til din kanal.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Whispering directly to you.</source>
        <translation>Hvisken direkte til dig.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Not talking.</source>
        <translation>Snakker ikke.</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>This is a channel on the server. The icon indicates the state of the channel:</source>
        <translation>Dette er en kanal på serveren. Ikonet viser tilstanden af kanalen:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Your current channel.</source>
        <translation>Din nuværende kanal.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A channel that is linked with your channel. Linked channels can talk to each other.</source>
        <translation>En kanal der er sammenkædet med din kanal. Brugere i sammenkædede kanaler kan snakke med hinanden.</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A channel on the server that you are not linked to.</source>
        <translation>En kanal på serveren som du ikke er sammenkædet med.</translation>
    </message>
    <message>
        <location line="+17"/>
        <source>This shows the flags the user has on the server, if any:</source>
        <translation>Dette viser de flag brugeren har på serveren, hvis der er nogen:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>On your friend list</source>
        <translation>På din venneliste</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Authenticated user</source>
        <translation>Autentificeret bruger</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Muted (manually muted by self)</source>
        <translation>Mikrofon deaktiveret (manuelt deaktiveret af sig selv)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Muted (manually muted by admin)</source>
        <translation>Mikrofon deaktiveret (manuelt deaktiveret af admin)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Muted (not allowed to speak in current channel)</source>
        <translation>Mikrofon deaktiveret (har ikke tilladelse til at tale i nuværende kanal)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Muted (muted by you, only on your machine)</source>
        <translation>Mikrofon deaktiveret (deaktiveret af dig, og kun på din computer)</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Deafened (by self)</source>
        <translation>Lyd deaktiveret (af sig selv)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Deafened (by admin)</source>
        <translation>Lyd deaktiveret (af admin)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User has a new comment set (click to show)</source>
        <translation>Brugeren har sat en ny kommentar (klik for at vise)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>User has a comment set, which you&apos;ve already seen. (click to show)</source>
        <translation>Bruger har sat en kommentar, som du allerede har set. (klik for at vise)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Ignoring Text Messages</source>
        <translation>Ignorerer tekstbeskeder</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>This shows the flags the channel has, if any:</source>
        <translation>Dette viser kanalernes flag, hvis der er nogen:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Channel has a new comment set (click to show)</source>
        <translation>Kanal har fået en ny kommentar (klik for at vise)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Channel has a comment set, which you&apos;ve already seen. (click to show)</source>
        <translation>Kanal har en kommentar, som du allerede har set (klik for at vise)</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Channel will be hidden when filtering is enabled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+18"/>
        <source>Name</source>
        <translation>Navn</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>Flags</source>
        <translation>Flag</translation>
    </message>
    <message>
        <location line="+736"/>
        <source>Are you sure you want to drag this channel?</source>
        <translation>Er du sikker på, at du vil flytte denne kanal?</translation>
    </message>
    <message>
        <location line="+94"/>
        <location line="+20"/>
        <source>Cannot perform this movement automatically, please reset the numeric sorting indicators or adjust it manually.</source>
        <translation>Kan ikke udføre denne flytning automatisk. Vær venlig at nulstille de numeriske sorteringsindikatorer eller juster det manuelt.</translation>
    </message>
</context>
<context>
    <name>VersionCheck</name>
    <message>
        <location filename="VersionCheck.cpp" line="+143"/>
        <source>Upgrade Mumble</source>
        <translation>Opgradér Mumble</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>A new version of Mumble has been detected and automatically downloaded. It is recommended that you either upgrade to this version, or downgrade to the latest stable release. Do you want to launch the installer now?</source>
        <translation>En ny version af Mumble er blevet hentet automatisk. Det anbefales, at du enten opgraderer til denne version eller nedgraderer til den seneste stabile udgivelse. Ønsker du at starte installationsprogrammet nu?</translation>
    </message>
    <message>
        <location line="+15"/>
        <source>Failed to launch snapshot installer.</source>
        <translation>Start af snapshot-installationsprogrammet mislykkedes.</translation>
    </message>
    <message>
        <location line="+5"/>
        <source>Corrupt download of new version detected. Automatically removed.</source>
        <translation>Nyeste downloadede version er korrupt og blev automatisk fjernet.</translation>
    </message>
    <message>
        <location line="+23"/>
        <source>Downloading new snapshot from %1 to %2</source>
        <translation>Downloader nyt snapshot fra %1 til %2</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Failed to write new version to disk.</source>
        <oldsource>Failed to write new version to disc.</oldsource>
        <translation>Kunne ikke gemme ny version på disken.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>Mumble failed to retrieve version information from the central server.</source>
        <translation>Det mislykkedes Mumble at hente version-information fra den centrale server.</translation>
    </message>
</context>
<context>
    <name>ViewCert</name>
    <message>
        <location filename="ViewCert.cpp" line="+50"/>
        <source>Certificate Chain Details</source>
        <translation>Certifikatkæde-detaljer</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>Certificate chain</source>
        <translation>Certifikatkæde</translation>
    </message>
    <message>
        <location line="+6"/>
        <source>%1 %2</source>
        <translation>%1 %2</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Certificate details</source>
        <translation>Certifikatdetaljer</translation>
    </message>
    <message>
        <location line="+26"/>
        <location line="+37"/>
        <source>Common Name: %1</source>
        <translation>Fælles navn: %1</translation>
    </message>
    <message>
        <location line="-36"/>
        <location line="+37"/>
        <source>Organization: %1</source>
        <translation>Organisation: %1</translation>
    </message>
    <message>
        <location line="-36"/>
        <source>Subunit: %1</source>
        <translation>Underenhed: %1</translation>
    </message>
    <message>
        <location line="+1"/>
        <location line="+37"/>
        <source>Country: %1</source>
        <translation>Land: %1</translation>
    </message>
    <message>
        <location line="-36"/>
        <location line="+37"/>
        <source>Locality: %1</source>
        <translation>Lokalitet: %1</translation>
    </message>
    <message>
        <location line="-36"/>
        <location line="+37"/>
        <source>State: %1</source>
        <translation>Stat: %1</translation>
    </message>
    <message>
        <location line="-36"/>
        <source>Valid from: %1</source>
        <translation>Gyldig fra: %1</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Valid to: %1</source>
        <translation>Gyldig til: %1</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Serial: %1</source>
        <translation>Serial: %1</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Public Key: %1 bits %2</source>
        <translation>Offentlig nøgle: %1 bits %2</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>RSA</source>
        <translation>RSA</translation>
    </message>
    <message>
        <location line="+0"/>
        <source>DSA</source>
        <translation>DSA</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Digest (SHA-1): %1</source>
        <translation>Digest (SHA-1): %1</translation>
    </message>
    <message>
        <location line="+13"/>
        <source>Email: %1</source>
        <translation>Email: %1</translation>
    </message>
    <message>
        <location line="+4"/>
        <source>DNS: %1</source>
        <translation>DNS: %1</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Issued by:</source>
        <translation>Udstedt af:</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>Unit Name: %1</source>
        <translation>Enhedsnavn: %1</translation>
    </message>
</context>
<context>
    <name>VoiceRecorder</name>
    <message>
        <location filename="VoiceRecorder.cpp" line="+287"/>
        <source>Recorder failed to create directory &apos;%1&apos;</source>
        <translation>Det mislykkeds optageren at oprette mappen &apos;%1&apos;</translation>
    </message>
    <message>
        <location line="+14"/>
        <source>Recorder failed to open file &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+166"/>
        <source>.wav - Uncompressed</source>
        <translation>.wav - Ukomprimeret</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>.ogg (Vorbis) - Compressed</source>
        <translation>.ogg (Vorbis) - Komprimeret</translation>
    </message>
    <message>
        <location line="+3"/>
        <source>.au - Uncompressed</source>
        <translation>.au - Ukomprimeret</translation>
    </message>
    <message>
        <location line="+2"/>
        <source>.flac - Lossless compressed</source>
        <translation>.flac - Tabsfri komprimeret</translation>
    </message>
</context>
<context>
    <name>VoiceRecorderDialog</name>
    <message>
        <location filename="VoiceRecorderDialog.ui"/>
        <location filename="VoiceRecorderDialog.cpp" line="+134"/>
        <location line="+8"/>
        <location line="+10"/>
        <location line="+9"/>
        <location line="+143"/>
        <source>Recorder</source>
        <translation>Optager</translation>
    </message>
    <message>
        <location/>
        <source>Control</source>
        <translation>Kontrol</translation>
    </message>
    <message>
        <location/>
        <source>00:00:00</source>
        <translation>00:00:00</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Start</source>
        <translation>&amp;Start</translation>
    </message>
    <message>
        <location/>
        <location filename="VoiceRecorderDialog.cpp" line="-21"/>
        <source>S&amp;top</source>
        <translation>S&amp;top</translation>
    </message>
    <message>
        <location/>
        <source>Mode</source>
        <translation>Indstilling</translation>
    </message>
    <message>
        <location/>
        <source>Multichannel</source>
        <translation>Multikanal</translation>
    </message>
    <message>
        <location/>
        <source>Output</source>
        <translation>Output</translation>
    </message>
    <message>
        <location/>
        <source>Output format</source>
        <translation>Output format</translation>
    </message>
    <message>
        <location/>
        <source>Target directory</source>
        <translation>Målsti</translation>
    </message>
    <message>
        <location/>
        <source>Filename</source>
        <translation>Filnavn</translation>
    </message>
    <message>
        <location/>
        <source>&amp;Browse...</source>
        <translation>&amp;Gennemse...</translation>
    </message>
    <message>
        <location filename="VoiceRecorderDialog.cpp" line="-212"/>
        <source>Valid variables are:</source>
        <translation>Gyldige variabler er:</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts the user&apos;s name</source>
        <translation>Indsætter brugerens navn</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts the current date</source>
        <translation>Indsætter den nuværende dato</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts the current time</source>
        <translation>Indsætter det nuværende tidspunkt</translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Inserts the hostname</source>
        <translation>Indsætter værtsnavnet</translation>
    </message>
    <message>
        <location line="+26"/>
        <source>Recorder still running</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+1"/>
        <source>Closing the recorder without stopping it will discard unwritten audio. Do you really want to close the recorder?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+33"/>
        <source>Unable to start recording. Not connected to a server.</source>
        <translation>Kunne ikke starte optagelse. Ikke forbundet til en server.</translation>
    </message>
    <message>
        <location line="+8"/>
        <source>The server you are currently connected to is version 1.2.2 or older. For privacy reasons, recording on servers of versions older than 1.2.3 is not possible.
Please contact your server administrator for further information.</source>
        <translation>Serveren, som du i øjeblikket er forbundet til, er version 1.2.2 eller ældre. For at beskytte privatlivet er det ikke muligt at optage på servere ældre end version 1.2.3.
Kontakt venligst din serveradministrator for yderligere information.</translation>
    </message>
    <message>
        <location line="+10"/>
        <source>There is already a recorder active for this server.</source>
        <translation>Der er allerede en igangværende optagelse på denne server.</translation>
    </message>
    <message>
        <location line="+9"/>
        <source>Please select a recording format.</source>
        <translation>Vælg venligst et optageformat.</translation>
    </message>
    <message>
        <location line="+73"/>
        <source>Stopping</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location line="+28"/>
        <source>Select target directory</source>
        <translation>Vælg målsti</translation>
    </message>
    <message>
        <location filename="VoiceRecorderDialog.ui"/>
        <source>Downmix</source>
        <translation>Nedmixet</translation>
    </message>
</context>
<context>
    <name>WASAPISystem</name>
    <message>
        <location filename="WASAPI.cpp" line="+184"/>
        <source>Default Device</source>
        <translation>Standard enhed</translation>
    </message>
</context>
<context>
    <name>qwPTTButtonWidget</name>
    <message>
        <location filename="PTTButtonWidget.ui"/>
        <source>Mumble PTT</source>
        <translation>Mumble tryk-for-snak</translation>
    </message>
    <message>
        <location/>
        <source>Push to talk</source>
        <translation>Tryk for at snakke</translation>
    </message>
</context>
</TS>
